黄麻/聚丙烯复合板材热压工艺参数的优化

纺织学报 ›› 2006, Vol. 27 ›› Issue (9): 47-50.

黄麻/聚丙烯复合板材热压工艺参数的优化

杜兆芳¹;张元明²;黄晨¹;高春燕²;胡凤霞¹;曹建飞¹

1.安徽农业大学安徽合肥230036;2.东华大学上海201620

收稿日期:2006-01-16 修回日期:2006-04-25 出版日期:2006-09-15 发布日期:2006-09-15

Optimization of the hot pressing process parameters of jute/polypropylene fiber composite plate

DU Zhao-fang;ZHANG Yuan-ming;HUANG Chen;GAO Chun-yan;HU Feng-xia;CAO Jian-fei

1.Anhui Agricultural University;Hefei;Anhui 230036;China;2.Donghua University;Shanghai 201620;China

Received:2006-01-16 Revised:2006-04-25 Online:2006-09-15 Published:2006-09-15

摘要/Abstract

摘要： 研究了黄麻/聚丙烯复合板材的热压工艺与纤维板材性能的关系,主要探讨了热压温度、时间、压力对板材力学性能的影响,并利用三因子二次通用旋转组合试验,找出最优热压工艺参数为温度166.26℃、时间3.32 min、压力4.34 MPa,且由显著性检验结果、回归方程式及相互关系图可以看出复合板材的强度是随着成型温度和时间的增加呈先增加后减小的趋势。

Abstract: The relation between the hot pressing process and the product performance of jute/polypropylene fiber composite plate was studied with focuses on the effect of hot pressing temperature,time and pressure on the mechanical property of the fiber composite plate.And through a special mathematics method,the optimal hot pressing process parameters were found out:temperature,(166.26 ℃;) time,(3.32 min;) pressure,(4.34 MPa.) Through significance examination results,regression equation and correlation chart,it can be seen that as the shaping temperature and time increase,the strength of the fiber composite plate first increases,but then drops.

杜兆芳;张元明;黄晨;高春燕;胡凤霞;曹建飞. 黄麻/聚丙烯复合板材热压工艺参数的优化[J]. 纺织学报, 2006, 27(9): 47-50.

DU Zhao-fang;ZHANG Yuan-ming;HUANG Chen;GAO Chun-yan;HU Feng-xia;CAO Jian-fei. Optimization of the hot pressing process parameters of jute/polypropylene fiber composite plate[J]. JOURNAL OF TEXTILE RESEARCH, 2006, 27(9): 47-50.

参考文献

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed