纺织学报 ›› 2009, Vol. 30 ›› Issue (04): 101-105.

• 服装工程 • 上一篇    下一篇

基于面料弹性贴体针织衣身数学模型的建立

刘咏梅;何海洋;姚娟   

  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-04-15 发布日期:2009-04-15

Mathematical model for knitted bodywear based on fabric elasticity

LIU Yongmei; HE Haiyang; YAO Juan   

  • Received:1900-01-01 Revised:1900-01-01 Online:2009-04-15 Published:2009-04-15

摘要: 为研究针织面料样板结构与弹性变化的定量关系,首先进行针织面料弹性试验,在此基础上对选用的针织面料进行立体裁剪,得到基于针织面料弹性的针织衣身样板,并将其制成贴体型梭织衣身样板作为穿着尺寸样板。经针织与梭织样板比较分析,研究针织样板各部位尺寸间的变形规律。运用SPSS数学工具通过回归分析,建立针织样板各部位横向尺寸的数学模型。依据理论计算值与样板实际值,最终建立针对不同弹性针织面料贴体衣身样板细部尺寸间变化规律的数学模型,提高了样板设计效率。

Abstract: In order to build the quantitative relationship between elastic knitted fabric and garment pattern, at first, the elastic performance tests of knitted fabric are carried out on. Then the draping operation is done for the selected knitted fabrics, and the knitted patterns considering fabric flexibility are obtained. The woven bodywear patterns are made as the standard ones. The distortion rules of all the measurements on the knitted patterns are studied by comparing the knitted patterns with the woven ones. The mathematical models of all the transverse measurements on the knitted patterns are built by using SPSS. The rationality of mathematical models is analyzed by comparing the theoretical measurements and the actual ones of the samples,and finally a mathematical model is developed for the changing rules of detailed measurement of bodywear of different elastic fabrics. This model improves the efficiency of pattern design.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!