纺织学报 ›› 2006, Vol. 27 ›› Issue (5): 29-33.

• 研究探讨 • 上一篇    下一篇

基于通讯协议的提花控制研究

沈炜1;胡钦彤2;李慧3   

  1. 1.浙江理工大学信息电子学院 浙江杭州310018;2.杭州奇汇电子提花机有限公司 浙江杭州310021;3.浙江传媒学院传播科技系 浙江杭州310018
  • 收稿日期:2005-08-21 修回日期:2005-11-04 出版日期:2006-05-15 发布日期:2006-05-15

Research on jacquard control based on communication protocols

SHEN Wei;HU Qin-tong;LI Hui   

  1. 1.Information & Electronics College;Zhejiang Sci-Tech University;Hangzhou;Zhejiang 310018;China;2.Hangzhou Qihui Electric Jacquard Co.;Ltd.;Hangzhou;Zhejiang 310021;China;3.Communications Technology Department;Zhejiang University of Media and Communications;Hangzhou;Zhejiang 310018;China
  • Received:2005-08-21 Revised:2005-11-04 Online:2006-05-15 Published:2006-05-15

摘要: 织机与提花机控制系统之间基于通讯协议进行的连接与传统连接方式相比,在可靠性、扩展性和标准化等方面有更大的优势,但也更为复杂。深入分析了提花机控制系统与织机之间基于通讯协议数据交互的各方面内容,包括硬件接口、协议的基本信息及通讯中所使用的各种会话等。并以Picanol和Vamatex织机为例,介绍了提花机控制系统在织造过程中与织机进行通讯的方法,给出采用通讯协议控制器来实现基于通讯协议的提花控制的解决方案。

Abstract: The connection between jacquard and loom based on communication protocols has advantages over the traditional one in many aspects,including reliability,expansibility and standardization,etc.,but it is more complex than the latter.This paper is devoted to an all-round discussion on the data interaction between jacquard control system and loom on the basis of the communication protocols,involving hardware interface,basic information,sessions in communications and so on.Taking Picanol and Vamatex looms for examples,it explains how the jacquard control system to communicate with the loom during weaving.Finally,the solution for applying a protocol controller to the jacquard control on the basis of the communication protocols is put forward.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!