纺织学报 ›› 2010, Vol. 31 ›› Issue (6): 114-119.

• 服装工程 • 上一篇    下一篇

节裙造型与织物性能的相关性

刘成霞; 胡琼; 孙丽敏   

  1. 浙江理工大学服装学院
  • 收稿日期:2009-07-23 修回日期:2010-02-04 出版日期:2010-06-15 发布日期:2010-06-15
  • 通讯作者: 刘成霞

Correlation between sculpt of tiered skirts and fabric performances

LIU Chengxia; HU Qiong; SUN Limin

  

  1. Fashion Design Academy, Zhejiang Sci-Tech University
  • Received:2009-07-23 Revised:2010-02-04 Online:2010-06-15 Published:2010-06-15
  • Contact: LIU ChengXia

摘要:

为研究节裙造型与织物性能的相关性,选用9种常见面料,用FAST织物风格仪测试了面料的常见力学性能,并用同一样板分别制作了节裙,邀请专业人员对其造型进行评分。固定节裙位置,用数码相机对节裙从不同角度进行拍照,然后用Photoshop进行图像处理,提取了节裙不同角度的像素面积、底摆曲线投影参数、正面抽褶宽度3个方面的造型客观评价指标,最后借助相关分析及聚类分析进行数据处理。研究结果表明:与节裙造型主观评价关系密切的客观指标依次是正面偏侧45°像素面积、褶宽差、平均波峰(波谷)距离;影响节裙造型客观指标的面料性能依次是弯曲刚度、悬垂性、剪切刚度等;柔软易变形、悬垂系数小的面料制成的节裙易呈H型,且裙摆波浪较碎小、波浪数较多。

Abstract:

In order to find out the relation between the sculpt of tiered skirts and performances of fabric, nine common fabrics were chosen. FAST instrument was used to test the mechanical properties of the fabrics and then made into tiered skirts with the same pattern. Professionals were invited to evaluate the skirts sculpt. Digital camera was used to take photos of the skirts from different angles, and the photos were processed with Photoshop to get their different pixel areas, parameters of ham cuve and gathering width. Finally, the data were processed with correlation and clustering analysis. The research findings indicated that the objective evaluation parameters closely related with subjective evaluation score are shown in the following order: pixel area of 45°between front and side position, difference of the two gathering width, average distance of wave peak and trough. The performances influencing the sculpt of tiered skirts are in the following order: bending rigidity, drapability, shearing rigidity. The tiered skirts made of soft and flexible fabrics with good drapability takes on the shape of H, which have more small waves than those made of rigid fabrics.

中图分类号: 

  • TS941
[1] 邢乐 梁惠娥 刘传兰. 中式服装消费意向的影响因素[J]. 纺织学报, 2017, 38(03): 155-161.
[2] 李利君 宋国文 李睿 王丽文 向春晖. 消防员防护服面料的热湿舒适性[J]. 纺织学报, 2017, 38(03): 122-125.
[3] 王玲 杨以雄 陈炜. 服装工序相似性标准工时预测[J]. 纺织学报, 2016, 37(11): 114-119.
[4] 于芳. 创意服装的成衣转化设计[J]. 纺织学报, 2015, 36(11): 109-0.
[5] 卢雨正 高卫东 常丽霞. 春夏女装流行色的层次聚类分类方法[J]. 纺织学报, 2015, 36(10): 134-0.
[6] 戎丹云. 现代女装造型设计中几何模块的设计组合[J]. 纺织学报, 2015, 36(10): 128-0.
[7] 金爱燕 高佩佩 尚笑梅. 针对成衣样版特征的裁剪路径优化设计[J]. 纺织学报, 2015, 36(09): 89-93.
[8] 周赳 赵庆会. 基于分层组合设计模式的纹样设计原理与方法[J]. 纺织学报, 2015, 36(06): 37-0.
[9] 胡少营 张龙琳 张文斌. 采用熟练率的服装流水线节拍设计模型[J]. 纺织学报, 2015, 36(05): 133-138.
[10] 叶晓露 庞程方 金娟凤 邹奉元. 短裤特征截面曲线的径向基函数神经网络模型构建[J]. 纺织学报, 2015, 36(05): 83-88.
[11] 丁英翘. 半长形男士灯笼裤在现代服装设计中的应用[J]. 纺织学报, 2015, 36(04): 124-0.
[12] 朱广舟 李晓久. 人体扫描线点云精简与孔洞修补[J]. 纺织学报, 2015, 36(03): 110-0.
[13] 黄建华. 睡袋的热舒适模型[J]. 纺织学报, 2015, 36(03): 105-0.
[14] 董智佳 蒋高明 吴志明 丛洪莲 张爱军. 经编无底无缝织物成形原理与计算机辅助设计[J]. 纺织学报, 2015, 36(02): 55-0.
[15] 朱广舟 李晓久. 服装二维裁片虚拟模拟技术[J]. 纺织学报, 2014, 35(10): 141-0.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!