纺织学报 ›› 2010, Vol. 31 ›› Issue (10): 20-23.

• 纺织工程 • 上一篇    下一篇

PTT长丝机织人造血管的顺应性

高洁,丁辛,陈莹,李毓陵,王璐,赵学谦   

  1. 1. 东华大学纺织学院 2. 东华大学纺织面料技术教育部重点实验室
  • 收稿日期:2009-10-20 修回日期:2009-12-24 出版日期:2010-10-15 发布日期:2010-10-15
  • 通讯作者: 丁辛

On compliance improvement of artifical blood vessels made of PTT filaments

GAO Jie1, DING Xin1,2, CHEN Ying1, LI Yuling1,2, WANG Lu1,2, ZHAO Xueqian1   

  1. 1. College of Textiles, Donghua University 2. Key Laboratory of Textile Science & Technology, Ministry of Education,Donghua University
  • Received:2009-10-20 Revised:2009-12-24 Online:2010-10-15 Published:2010-10-15

摘要:

针对目前机织涤纶人造血管的顺应性较低问题,采用聚对苯二甲酸丙二醇酯(PTT)纤维作为纬纱用材料,织制了机织人造血管用织物,并且测试了织物的力学性能。结果显示,用PTT纬纱织制的机织人造血管用织物,其初始模量大大低于PET织物,且弹性回复率好。在自行研制的血管顺应性仿真测试仪上评价了PET和PTT管状织物的顺应性。结果表明,在相同的脉冲压力作用下,PTT长丝制成的人造血管具有良好的径向顺应性,较符合人体内血管的直径/压力变化特征。

Abstract:

In view of the low radial compliance of the current woven artifical blood vessels made of polyester (PET), polytrimethylene terephthalate (PTT) filament yarns are used as the weft in manufacturing artifical blood vessels. Tensile tests show that the initial modulus of woven fabrics made of PTT filaments is much lower than that of common PET filaments. In addition, the former shows much better property of elastic recovery than the latter. The radial compliance of woven artifical blood vessels made of PTT and PET filaments is tested respectively on a newly developed compliance tester. The results show that, under the same pulse pressures, PTT woven artifical blood vessel has good radial compliance and is more suitable to meet the requirements of the body blood vessel in diameter-pressure variation.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!