纺织学报 ›› 2011, Vol. 32 ›› Issue (6): 22-27.

• 纤维材料 • 上一篇    下一篇

竹纤维素分离级分的结构特性

谢涛1,余秉琦2   

  1. 1. 湖南工程学院
    2.
  • 收稿日期:2010-05-21 修回日期:2010-09-26 出版日期:2011-06-15 发布日期:2011-06-15
  • 通讯作者: 谢涛 E-mail:xt1105@yahoo.com.cn
  • 基金资助:

    省级;校级

Structural characterization of bamboo cellulose fractions

  • Received:2010-05-21 Revised:2010-09-26 Online:2011-06-15 Published:2011-06-15

摘要: 为了促进竹纤维素的高效利用,研究了竹纤维分级分离所得3种竹纤维素级分的结构特性。结果表明,随着分离级数增加,纤维素分子链发生断裂的程度加剧,重均相对分子质量MW值逐渐减小。第一级、二级和三级纤维素是高纯度的,它们的红外图谱上没有出现与木质素和半纤维素有关的特征吸收峰。经分级分离后,三种纤维素的物理结构发生了很大变化,其纤维表面疏松多孔,且密布沟槽。从第一级、二级到三级纤维素纤维的长度和结晶度逐渐降低,而酶解效率逐渐增高。由此可见,各级竹纤维素的加工与应用特性得到改善。

关键词: 竹纤维素, 分级分离, 结构特性

Abstract: To make bamboo cellulose efficiently utilized, structural characterizations of three fractional celluloses isolated by alkaline hydrogen peroxide from defatted bamboo fiber were studied. The results demonstrated that weight-average relative molecular weight (MW) of cellulose gradually decreased because of the deepening fractured-degree of cellulose molecular chain with the increasing of fractional grade. There didn’t appear the absorbance spectra relative to lignin and hemicellulose in the FT-IR pictures owing to the highly purities of three fractional celluloses. After fractionating, there occurred some great changes for the structure of three fractional celluloses, so many holes and cannelures were distributed in the loose surface of cellulose fibers. The length and crystalline degree of the first, second and third fractional cellulose decreased in proper order, while the cellulose hydrolysis ratio was just the reverse. Thus it can be seen that the processing and application characteristics of the first, second and third fractional cellulose could be improved.

[1] 谢涛;余秉奇;张儒. 基于碱性H2O2法分级分离竹材半纤维素的结构特性[J]. 纺织学报, 2011, 32(4): 18-22.
[2] 陶钧. 织物结构对缝纫条件的选择[J]. 纺织学报, 2004, 25(05): 119-121.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!