纺织学报 ›› 2011, Vol. 32 ›› Issue (12): 56-59.

• 纺织工程 • 上一篇    下一篇

横机罗纹线圈长度预测模型

袁新林,徐艳华   

  1. 南通纺织职业技术学院
  • 收稿日期:2011-01-28 修回日期:2011-08-08 出版日期:2011-12-15 发布日期:2011-12-16
  • 通讯作者: 袁新林 E-mail:xingling-1971@163.com

Model of the stitch length for rib fabric on the flat machine

,   

  • Received:2011-01-28 Revised:2011-08-08 Online:2011-12-15 Published:2011-12-16

摘要: 通过观察横机罗纹织物的编织过程,在一定假设的基础上,经过分析和推导,建立了预测罗纹织物线圈长度的几何模型,并通过在设定条件下编织出的罗纹织物线圈长度的实测值与预测值的对比研究,验证了该模型的可行性;在模型的验证中发现,横机罗纹织物的线圈长度分别与压针深度和齿口距呈较好的线性关系;根据所建模型,可以对普通横机机头上的刻度重新进行设置,既方便于生产时的调节,又能快速确定线圈长度,为生产用纱预算及成本核算提供了依据。

Abstract: After the knitting process was observed on the flat machine, forecast model of the stitch length for rib fabric was established basing on certain assumptions through analysis and deduction. Feasibility of the model was verified by the comparison between the measured and predicted stitch length of the rib fabric under the setting conditions. The results revealed that the stitch length of rib fabrics showed a good linear relationship, respectively, with pressure needle depth and needle bed gap. According to the model, scale on the flat machine head can be reset, which is convenient in production control and can quickly determine the stitch length, provides a basis for yarn budget and cost accounting.

中图分类号: 

  • TS183.4
[1] 陈景波 华强 周平 浦炜 卢达. 高性能电脑横机纱嘴控制方法的设计与实现[J]. 纺织学报, 2013, 34(10): 137-0.
[2] 张华, 胡旭东, 彭来湖, 张建义. 基于Q15的横机针位置跟踪算法[J]. 纺织学报, 2012, 33(6): 88-91.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!