纺织学报 ›› 2015, Vol. 36 ›› Issue (07): 43-49.

• 纺织工程 • 上一篇    下一篇

机织物有效结构模型的电磁屏蔽效能影响因素

  

  • 收稿日期:2014-07-07 修回日期:2015-04-02 出版日期:2015-07-15 发布日期:2015-07-20
  • 通讯作者: 肖红 E-mail:76echo@vip.sina.com

Influential factors of electromagnetic shielding effectiveness based on the effective woven fabrics structure model

  • Received:2014-07-07 Revised:2015-04-02 Online:2015-07-15 Published:2015-07-20

摘要:

基于对含金属纱线机织物的结构分析,提出该类织物的有效电磁屏蔽结构由金属纤维纱线构成;采用裸铜丝制备模拟织物中金属纱线排列的有效结构模型样品,改变其排列方式、排列间距、交叉处及四周连通情况等的模型样品,用屏蔽室法获得1~18 GHz范围内的屏蔽效能。结果表明:金属纱线排列间距是影响屏蔽效能的关键因素;金属纱线单向排列和双向排列样品的屏蔽效能一样,但是单向排列样品具有显著方向性;双向网格排列样品的网格尺寸影响其屏蔽效能。实验条件下金属纤维纱线交叉点处的连通情况对屏蔽效能影响不大,但尚需要进一步研究。

关键词: 金属纤维纱线, 电磁屏蔽效能, 有效电磁屏蔽结构模型, 排列方式, 连通

Abstract:

Based on the structure analysis of woven fabric composed of metal fiber, our study showed that metal fiber yarn forms an effective electromagnetic shielding structure; the bare copper wires which simulated mental fiber of fabric formed the effective structural model s. The arrangement, arrangement spacing and connected manner between the bare copper wires of the samples were different. The shielding effectiveness of these samples is 1 ~ 18 GHZ by the shielding chamber method. The studies have shown that arrangement spacing of the metal fiber is the key factors affecting shielding effectiveness; the shielding effectiveness of the sample with unidirectional arrangement of metal fiber is the same as that with the bidirectional arrangement, but the shielding effectiveness of the sample with unidirectional arrangement metal fiber has significant direction; with bidirectional grid, the grid size of the sample affects its shielding effectiveness; under laboratory conditions, if the junction of the mental fiber is connectivity, the shielding effectiveness will be change.

Key words: metal fiber yarn, electromagnetic shielding effectiveness, effective electromagnetic shielding structure mldel, arrangement, connectivity

[1] 王利君 毛鹏丽. 防电磁辐射聚吡咯/ 棉织物的制备及其性能[J]. 纺织学报, 2018, 39(09): 95-101.
[2] 王丽君 卢业虎 王帅 马妮妮. 形状记忆合金尺寸对消防服面料防护性能的影响[J]. 纺织学报, 2018, 39(06): 113-118.
[3] 何甜 吴志明. 连衣裙用多梳拉舍尔定位蕾丝面料的纹样设计[J]. 纺织学报, 2016, 37(08): 114-118.
[4] 肖红 施楣梧 钞杉 唐章宏 王群. 金属纱线排列方式对屏蔽效能的影响[J]. 纺织学报, 2015, 36(12): 25-0.
[5] 刘佳佳 吴志明. 多梳拉舍尔窄条花边的图案排列方式[J]. 纺织学报, 2013, 34(9): 58-0.
[6] 刘雪;狄剑锋;齐宏进. 基底结构对磁控溅射铜膜电磁屏蔽效能的影响[J]. 纺织学报, 2009, 30(08): 43-48.
[7] 安秋凤.;高胜利;李临生;张西亚;金云霞;李明涛. 棉纤维表面氨基硅的膜形貌及其定向排列方式[J]. 纺织学报, 2007, 28(6): 8-11.
[8] 文珊. 不锈钢纤维织物的屏蔽和服用性能[J]. 纺织学报, 2004, 25(06): 79-80.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 周玉麟. 上海市纺织系统科技情报工作会议[J]. 纺织学报, 1987, 8(10): 39 .
[2] 朱明高. 浆纱的再粘现象及其克服方法[J]. 纺织学报, 1987, 8(01): 40 -41 .
[3] 刘正宪;陈治鸣. CZ-4型自动双圆盘理筒管机[J]. 纺织学报, 1987, 8(01): 15 -16 .
[4] 王盛奎. 染织物色深的探讨[J]. 纺织学报, 1998, 19(05): 31 -32 .
[5] 曲丽君;张百祥. 次兔毛/棉混纺气流纱工艺研究[J]. 纺织学报, 1996, 17(04): 57 .
[6] 冼远芳;李海东;王宇明. 水玻璃在练漂液中稳定双氧水的探讨[J]. 纺织学报, 2004, 25(04): 98 -99 .
[7] 欧阳友生;陈仪本;彭红;谢小保;彭如群. 织物防螨抗菌测试及评价标准的探讨[J]. 纺织学报, 2005, 26(5): 143 -145 .
[8] 詹伯君. 煮茧机压力温度自动调节系统[J]. 纺织学报, 1982, 3(09): 30 -35 .
[9] 朱宝贵. 两种半自动络筒接头小机的分析[J]. 纺织学报, 1984, 5(08): 26 -29 .
[10] 李明忠;卢神州;吴徵宇;严灏景. 多孔丝素膜的制备及其形态结构[J]. 纺织学报, 2000, 21(05): 4 -7 .