纺织学报 ›› 2016, Vol. 37 ›› Issue (2): 125-132.

• 管理与信息化 • 上一篇    下一篇

运用离散事件仿真的罗拉牵伸模型

  

  • 收稿日期:2015-10-09 修回日期:2015-11-18 出版日期:2016-02-15 发布日期:2016-02-22

Roller-drafting model based on discrete-event simulation

  • Received:2015-10-09 Revised:2015-11-18 Online:2016-02-15 Published:2016-02-22

摘要:

为研究罗拉牵伸过程中纤维的运动规律和预测牵伸后输出条干的质量,在离散系统建模技术的基础上,提出利用离散事件来仿真罗拉牵伸过程的方法。将纺织牵伸理论与离散理论相结合建立了罗拉牵伸离散事件仿真模型,并讨论模型中参数变化对输出条干不匀的影响。结果表明:该模型能够体现出罗拉牵伸过程中须条运动的动态特性,仿真中可以追踪每根纤维经过牵伸区的运动过程。通过与实际试验数据的比对,证明该模型能够预测出牵伸后输出须条的条干不匀规律。通过对所建模型中各输入参数的讨论指出,纤维长度和输入须条线密度是罗拉牵伸过程中最重要的影响因素。

关键词: 罗拉牵伸, 条干不匀, 离散事件系统, 仿真模型

Abstract:

In order to study on the motion of fiber during roller-drafting process and predict the irregularity of slivers, a new approach was developed to simulate the roller-drafting process based on the discrete-event simulation. The roller-drafting discrete-event simulation model was established which combines the textile draft theory and discrete theory together. The effect of parameters on output slivers unevenness was discussed. The results indicated that this model could reflect the dynamic behavior of slivers and trace the motion of each fiber during roller-drafting process. In contrast with practical test data, it proved that this model could predict the variation of output slivers unevenness though drafting. After discussing each parameter of established model, it pointed out that the fiber length and linear density of slivers were the most significant effect on roller-drafting process.

Key words: roller-drafting, unevenn, discrete-event simulation, simulation model

[1] 郑静 夏风林 刘浪. 基于Simulink的经编机电子横移系统仿真[J]. 纺织学报, 2018, 39(02): 150-156.
[2] 余豪 张建建 刘可帅 陈军 夏治刚. 导纱钩运动引起的纺纱三角区变化对成纱性能的影响[J]. 纺织学报, 2016, 37(10): 19-25.
[3] 郁崇文 匡雪琴 黄晶. 纤维的长度特征对成纱的影响[J]. 纺织学报, 2013, 34(6): 126-130.
[4] 周旭玲;吴世华;陈彩惠;李茂松;周文龙. 棉/彩棉/绢丝混纺纱线的研制[J]. 纺织学报, 2010, 31(1): 32-35.
[5] 黄莉茜;刘水莲;蒋耀兴;王善元. 绢丝/锦纶长丝sirofil复合纱成纱性能[J]. 纺织学报, 2006, 27(4): 66-69.
[6] 王延伟;王琪;梅峰. 超细PET-FDY条干不匀率影响因素的研究[J]. 纺织学报, 2003, 24(04): 46-47.
[7] 纪峰;李汝勤;郭永平. 织物和服装仿真模型的理论研究综述[J]. 纺织学报, 2003, 24(03): 90-92.
[8] 蒋国华. 混纺比与涤/麻混纺纱性能关系探讨[J]. 纺织学报, 2002, 23(02): 41-42.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 冯毅力. 多台纤维强伸度仪与微机通信方法[J]. 纺织学报, 1998, 19(02): 23 -24 .
[2] 徐春叶;王树惠. 精梳机梳理力动态测试[J]. 纺织学报, 1993, 14(11): 8 -11 .
[3] 钱铁钧. 对国产新型粗纱机的一些改进建议[J]. 纺织学报, 1990, 11(06): 37 -38 .
[4] 牟翔凤. 再论气流纱条干不匀的成因[J]. 纺织学报, 1986, 7(05): 28 -31 .
[5] 顾平;管辛. 粘胶长丝加捻线的形态特征与数学模型[J]. 纺织学报, 2005, 26(2): 33 -36 .
[6] 吴俊;王东云;温盛军. 基于神经网络的裤装样板设计[J]. 纺织学报, 2004, 25(04): 102 -103 .
[7] 程洛. HF-1型多用测速仪的研制与喷气纺纱气圈转速的测试[J]. 纺织学报, 1985, 6(10): 11 -14 .
[8] 张海泉;赵林;姚穆. 纤维光学性质的探讨[J]. 纺织学报, 1988, 9(02): 14 -17 .
[9] 卜云峰*;崔辉仙**;童俨;高绪珊. 细旦涤纶的结构与性能的关系[J]. 纺织学报, 1996, 17(02): 8 -10 .
[10] 戴淑清;徐浡然;周鹏华. 纬编针织外衣上机工艺参数的探讨[J]. 纺织学报, 1982, 3(12): 32 -36 .