纺织学报 ›› 2016, Vol. 37 ›› Issue (12): 97-102.

• 服装工程 • 上一篇    下一篇

模块化的毛衫产品族设计及评价指标

  

  • 收稿日期:2015-11-03 修回日期:2016-08-21 出版日期:2016-12-15 发布日期:2016-12-21

Modularized product family design method of sweater and evaluation indexes

  • Received:2015-11-03 Revised:2016-08-21 Online:2016-12-15 Published:2016-12-21

摘要:

针对毛衫产品族设计中的模块划分规则不清晰、可操作性不强等问题,提出一种模块化的毛衫产品族设计方法。根据毛衫结构的特点,设计了模块划分规则:突出变型设计的方便性和产品族设计的通用性;将基于区域结构的横向模块、纵向模块与独立于区域结构的全身结构、装饰结构有效结合在一起,构成毛衫产品族的基本设计单元。另外,设计了一套模块化产品族设计的评价体系,根据多样性、通用性和新颖性3 个指标计算出平均设计时间成本,并给出了评价指标与时间成本的关系、时间成本与企业收益之间的关系。验证结果表明,所设计模块化方法在不降低产品族通用性的同时,可提高产品族的新颖性,进一步提升产品族的多样性,从而降低设计时间与成本。

关键词: 模块划分, 产品族设计, 评价指标, 大规模定制

Abstract:

In view that the rules of module partition are less clear and some are not so feasible in the product family design of sweater, a modularized product family design method of sweater is proposed. According to the structural characters of sweater, module partition rules are designed, which emphasize on the convenience of variant design and the generality of product family. Body regional structure-based horizontal modular and vertical modular are effectively combining with the whole structure and the decorative structure which is independent from the regional structure to constitute the basic design unit of the sweater product family. Furthermore, evaluation indexes of the modularized product family are designed, through which the average time cost of design is calculated according to the three indicators including diversity, universality and novelty. At the same time, the relationships of evaluation indexes and time cost, and time cost and enterprise profit are given. Experimental verification shows that the proposed modularization method can improve the novelty and diversity while without reducing the universality of the product family, so as to achieve the purpose of reducing the design time cost.

Key words: module partition, product family design, evaluation index, mass customization

[1] 贾小军 邓海涛 滕姿 曾丹. 应用轮廓线拟合提取蓝印花布图案基元[J]. 纺织学报, 2018, 39(08): 150-157.
[2] 朱江晖 高广明 富宁钰. 服装电商卖家的测评指标体系与综合评价模型[J]. 纺织学报, 2018, 39(07): 159-164.
[3] 於凌 洪文进 苗钰. 品牌服装橱窗陈列形象的影响因素及其权重分布[J]. 纺织学报, 2018, 39(06): 162-166.
[4] 蒋志青 马延涛 郭亚 马建伟 陈韶娟. 仿针织牛仔面料的开发及性能评价[J]. 纺织学报, 2018, 39(03): 45-49.
[5] 胡瑜 刘行 缪旭红. 经编纱线动态张力评价指标[J]. 纺织学报, 2018, 39(02): 68-72.
[6] 刘艳梅. 基于实例推理的毛衫快速变型设计方法[J]. 纺织学报, 2016, 37(05): 104-0.
[7] 徐燕妮 周海媚 王立川 陈雁. 服装缝制流水线仿真与评价指标[J]. 纺织学报, 2015, 36(12): 146-0.
[8] 许才国;刘晓刚. 服装大规模定制产品开发模式的现状与对策[J]. 纺织学报, 2009, 30(10): 143-148.
[9] 王志宏;祁国宁;顾新建;潘旭伟. 面向服装大规模定制的供应链管理[J]. 纺织学报, 2006, 27(2): 117-120.
[10] 潘旭伟;顾新建;邵晨曦;李兴森. 量体定制服装规模化生产的方法与实践[J]. 纺织学报, 2005, 26(4): 142-144.
[11] 吴迪冲;顾新建. 服装大规模定制特性分析[J]. 纺织学报, 2005, 26(3): 150-152.
[12] 吴迪冲;顾新建. 服装大规模定制及其结构体系研究[J]. 纺织学报, 2004, 25(05): 139-141.
[13] 贺金凤. 纺织企业技术改造效果的综合评价研究[J]. 纺织学报, 2004, 25(01): 112-114.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!