JOURNAL OF TEXTILE RESEARCH ›› 2018, Vol. 39 ›› Issue (03): 56-60.doi: 10.13475/j.fzxb.20170505006

Previous Articles     Next Articles

Forming process of shoulder and sleeves of whole garment

  

  • Received:2017-05-27 Revised:2017-11-08 Online:2018-03-15 Published:2018-03-09

Abstract:

In order to shapes of shoulder and sleeves of whole garment and improve efficiency of knitting, the forming method of shoulder and sleeves of whole garment was researched rsing flly formed computerized ft knitting machine with DS-ONE APPEX 3 design system. According to the structure of shoulder and sleeves of whole garment made by four-bed computerized forming method, the knitting methods can be classified into 6 types. The efficiency and structure improvement of these 6 kinds of knitting methods were emphatically discussed. Results show that ratio weaving is applicable to setting in style with same shoulder and setting in style without shoulder drop on front. Twisted yarn ring is conductive to the rolling-over of front sholder to back bed in setting in style without shoulder drop on front. Returning knit is suitable for the detail knitting of epaulet and raglan. Uniformity narrowing is the main knitting method of parachute shaped sleeves. Extra knitting can be used for the balance of tubular knitting of shoulder and sleeves.

Key words: whole garments sequence of sweater, shoulder and sleeve, computerized flat knitting machine, forming process

[1] 彭佳佳,蒋高明,卢致文,等.全成形毛衫在双针床电脑横机上的编织工艺[J].纺织学报,2015,36( 11) : 53-54. PENG Jiajia, JIANG Gaoming,LU Zhiwen, et al.Technical study of whole garment on V-bed computerized flat knitting machine[J].Journal of Textile Research,2015,36( 11) : 53-54. [2] 黄林初.国产电脑横机织可穿产品的编织研究[D].天津: 天津工业大学,2013( 2 /3) : 137 -138. HUANG Lin chu.Researches on the knit &wear technology on the domestic computerized flat knitting machine [D].Tianjin: Tianjin Polytechnic University,2013( 2 /3) : 137-138. [3] 祝细. 电脑横机织可穿针织服装的编织工艺及其性能研究[D]天津: 天津工业大学,2011: 4-5. ZHU Xi. Researches on the knit & wear technology and their garment property produced through computerized flat knitting machine[D]. Tianjin: Tianjin Polytechnic University,2011: 4-5. [4]王敏.四针床电脑横机的全成形工艺[J].纺织学报2017(04):62-63. WangMin. Whole garment knitting process on four-bed computerized flat knitting machine[J] Journal of Textile Research,. 2017(04):62-63 [5] 郭玉清,宋广礼,祝细.电脑横机上筒状成形织物收放针及开口编织[J].针织工业,2013( 2) : 17-18. GUO Yuqing,SONG Guangli,ZHU Xi.The narrowing, widening and open-end knitting of tubular-shaped fabricon computerized flat-knitting machines [J].Knitting Industries, 2013( 2) : 17-18. [6] 杨苏梅,毛莉莉. 引返编织在羊毛衫设计中的应用[J]. 毛纺科技,2009,(01):44-48. YANG Su-mei,MAO Li-li. Application of returning knit in woollen sweater design[J]. WoolTextileJournal2009,(01):44-48. [7]姜晓慧,王智.电脑横机花型设计实用手册[M]北京:中国纺织出版社,2014:105-108 Jiang Xiao-hui, Wangzhi,Knitting New Pattern[M]Beijing: China Textile &Apparel Press,2014:105-108. [8] JENNY Underwood. Knitting a 3D model[D]. Melbourne: RMIT University,2009: 16,28. [9] 中泽愈.人体与服装[M].袁观洛,译.北京: 中国纺织出版社,2001: 162 -198. NAKAZAWAYU .Human and Garmen[M]. YUANGuanluo,Translating. Beijing: China Textile & ApparelPress,2001: 162-198. [10]丛洪莲,王迪.针织毛衫袖型建模与工艺实现[J].纺织学报,2014,32(08):70-74 Modeling and technology realization of knitted sweater sleeve type[J] Journal of Textile Research,. 2014,32(08):70-74

[1] . Structure and knitting principle of whole garment [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(11): 48-55.
[2] . Whole garment knitting process on four-bed computerized flat knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(04): 61-67.
[3] . CAN Bus scheduling simulation for computerized flat knitting machine based on network control [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(08): 154-159.
[4] . Design and realization of yarn carriers control method for high performance computerized flat knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(10): 137-0.
[5] .   Modeling and simulation of loop forming mechanism of computerized flat knitting machine based on UG NX/Motion [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(1): 122-127.
[6] CHEN Jingbo;LU Da;WANG Lingling. Design of host computer software for automatic computerized flat knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(2): 131-135.
[7] WANG Jiman;SONG Guangli. Knitting time forecasting of computerized flat knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(5): 48-54.
[8] LUO Zhiping;DING Hao;ZHANG Yongyu. Technology for transfer needle grooves machining [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(10): 129-133.
[9] LUO Bingyang;MO Yimin;GUO Yan. Design of pattern preparation system of computerized flat knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2007, 28(7): 116-120.
[10] HUANG Xiangjun;LIU Meiqin. Embedded control system for computerized flat knitting machines based on Linux architecture [J]. JOURNAL OF TEXTILE RESEARCH, 2007, 28(3): 107-110.
[11] ZHAI Zhi-yong;FU Jian-zhong. Development of the pattern preparing system for fully automatic flat machine based on embedded technology [J]. JOURNAL OF TEXTILE RESEARCH, 2005, 26(4): 112-114.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!