Journal of Textile Research ›› 2022, Vol. 43 ›› Issue (12): 88-95.doi: 10.13475/j.fzxb.20210905408

• Dyeing and Finishing & Chemicals • Previous Articles     Next Articles

Preparation of modified carbonyl iron powder based on magnetron rough surface construction and its application in blue light curing superhydrophobic film

QIAO Luyang1, LÜ Qiaoli2, HU Qianheng1, WANG Chenglong1, ZHENG Jinhuan1   

  1. 1. Engineering Research Center for Eco-Dyeing and Finishing of Textiles, Ministry of Education, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
    2. Zhejiang Textile Engineering Society, Hangzhou, Zhejiang 310018, China
  • Received:2021-09-15 Revised:2022-05-11 Online:2022-12-15 Published:2023-01-06
  • Contact: WANG Chenglong

RichHTML

4

PDF (PC)

44

Abstract:

In view of the uncontrollable movement of functional particles in the curing process of superhydrophobic coating film, high energy consumption and long time consuming in traditional thermal curing process, the superhydrophobic film was prepared by modifying carbonyl iron powder and combining magnetic control technology and blue light curing technology. The optimal modification process was determined by analyzing the effects of modifier ratio, dosage, modified pH value and temperature on the modification effect of carbonyl iron powder, before the effects of magnetic field intensity on the surface contact angle and morphology of UV curable films were studied. The results show that when the mass ratio of modifier 3-(methacryloyloxy) propyl trimethoxysilane to 1H, 1H, 2H, 2H-perfluoro sunnyl trimethoxysilane is 1:3, the mass fraction is 20%, the modified pH value is 6, the modified temperature is 75 ℃ and the modified time is 1.5 h, the surface modification effect of carbonyl iron powder is the best with activity reaching 96% and the absolute value of zeta potential increasing from 22 mV to 43 mV. With the increase of magnetic field intensity, the surface contact angle of the film increases continuously. When the magnetic field intensity is set to 75 mT, the surface contact angle of the superhydrophobic film reaches 157.6° and the rolling angle is 6°, which meets the superhydrophobic standard.

Key words: superhydrophobic film, blue light curing, magnetic control technology, carbonyl iron powder, hydrophobic modification

CLC Number: 

  • TS190.8

Fig.1

Effect of mass ratio of KH570 and FAS on modification effect of carbonyl iron powder. (a) Activation degree; (b) Zeta potential"

Fig.2

Effect of mass ratio of KH570 and FAS on polymerization performance of UV curable coating slurry. (a)Polymerization rate;(b)Heat release"

Fig.3

Effect of pH value on modification effect of modified carbonyl iron powder. (a)Activation degree;(b)Zeta potential"

Fig.4

Effect of mass fraction of modifier on modification effect of carbonyl iron powder. (a) Activation degree; (b) Zeta potential"

Fig.5

Effect of mass fraction of modifier on polymerization properties of light cured coating slurry. (a)Polymerization rate;(b)Heat release"

Fig.6

Effect of reaction temperature on modification effect of carbonyl iron powder. (a) Activation degree; (b) Zeta potential"

Fig.7

XPS spectrum of carbonyl iron powder before and after modification. (a) Full spectrum; (a) F Spectrum; (c) C spectrum before modification; (d)C spectrum after modification"

Tab.1

Surface element content of carbonyl iron powder before and after modification%"

处理方式 Fe F O C Si
改性前 13.6 0 47.3 36.6 2.5
改性后 5.7 39.5 21.8 28.4 4.6

Fig.8

Hysteresis loop of carbonyl iron powder before and after modification"

Fig.9

Influence of magnetic induction on surface morphology of thin film"

Fig.10

Effect of magnetic induction on surface contact angle of UV curable film"

Fig.11

Rolling process of water droplets on film surface with contact angle of 157.6° over time"

[1] YANG M, LIU W, JIANG C, et al. Robust fabrication of superhydrophobic and photocatalytic self-cleaning cotton textile based on TiO2 and fluoroalkylsilane[J]. Journal of Materials Science, 2019, 54(11): 2079-2092.
doi: 10.1007/s10853-018-3001-1
[2] WANG Y, WANG W, QI Q, et al. Layer-by-layer assembly of PDMS-coated nickel ferrite/multiwalled carbon nanotubes/cotton fabrics for robust and durable electromagnetic interference shielding[J]. Cellulose, 2020, 27(5):2829-2845.
doi: 10.1007/s10570-019-02949-1
[3] JIN G W, KIM J Y, MIN B G. Superhydrophobic and antibacterial properties of cotton fabrics treated with PVDF and nano-ZnO through phase inversion process[J]. Fibers and Polymers, 2018, 19(9):1835-1842.
doi: 10.1007/s12221-018-8313-x
[4] POUR F Z, KARIMI H, AVARGANI V M. Preparation of a superhydrophobic and superoleophilic polyester textile by chemical vapor deposition of dichlorodimethylsilane for water-oil separation[J]. Polyhedron, 2019, 159:54-63.
doi: 10.1016/j.poly.2018.11.040
[5] 赵归圆, 崔运花. 涂层纺织品研究进展[J]. 纺织科技进展, 2015(1):5-9.
ZHAO Guiyuan, CUI Yunhua. Research progress of coated textile[J]. Progress in Textile Science & Technology, 2015(1):5-9.
[6] MELOT B C, TARASCON J M. Design and preparation of materials for advanced electrochemical storage[J]. Accounts of Chemical Research, 2013, 46(5):1226-1238.
doi: 10.1021/ar300088q pmid: 23282038
[7] 高华, 冯彦刚. 永磁材料的最新应用进展及其前景分析[J]. 能源与环保, 2019, 41(1):89-92.
GAO Hua, FENG Yangang. Latest application progress and prospect analysis of permanent magnet mate-rials[J]. China Energy and Environmental Protection, 2019, 41(1):89-92.
[8] 王光华, 孔金丞, 李雄军, 等. 羰基铁粉表面改性及其热稳定性研究[J]. 中国粉体技术, 2011, 17(2):5-8.
WANG Guanghua, KONG Jincheng, LI Xiongjun, et al. Investigation on surface modification and thermal stability of carbonyl iron particles[J]. China Powder Science and Technology, 2011, 17(2):5-8.
[9] LEE Sanghee, YIM Changyong, KIM Wuseok, et al. Magnetorheological elastomer films with tunable wetting and adhesion properties[J]. ACS Applied Materials & Interfaces, 2015, 7(35):19853-19856.
[10] 肖允恒, 张红辉, 杨泽达, 等. 基于磁流变弹性体膜的可控疏水表面制备与表征[J]. 中国表面工程, 2018, 31(2): 8-14.
XIAO Yunheng, ZHANG Honghui, YANG Zeda, et al. Preparation and characterization of tunable hydrophobic surfaces based on magnetorheological elastomer film[J]. China Surface Engineering, 2018, 31(2): 8-14.
[11] WANG Lili. Surface grafting modification of titanium dioxide by silane coupler KH570 and its influences on the application of blue light curing ink[J]. Dyes and Pigments, 2018, 163:232-237.
doi: 10.1016/j.dyepig.2018.11.048
[1] GAO Jing, WANG Lu. Influence of pretreatment process on superhydrophobic modification of wool/polyester fabric [J]. Journal of Textile Research, 2019, 40(09): 91-96.
[2] . Study on properties of blue light curable polymerization systems applied for textile digital printing [J]. Journal of Textile Research, 2015, 36(02): 121-127.
[3] . Preparation of wave-absorbing coated composite fabric and its microwave absorption capacity [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(5): 61-0.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd