JOURNAL OF TEXTILE RESEARCH ›› 2010, Vol. 31 ›› Issue (2): 27-32.

• 纺织工程 • Previous Articles     Next Articles

Influence of processing parameters on quality of fiber compact in condensing zone of compact spinning with lattice apron

WANG Yan;HUA Zhihong;CHENG Longdi;XUE Wenliang   

  • Received:2009-01-15 Revised:2009-06-05 Online:2010-02-15 Published:2010-02-15

Abstract:

To get the effect of different negative pressures and friction factor of lattice apron at the outer surface on fiber compact in condensing zone of compact spinning with lattice apron, computational fluid dynamic model was established, and flowing state of airflow were characterized in convergence zone. Previded that other conditions were fixed, the trajectories of fibers at the counterpart positions were different and when negative pressures were the same but friction factors were different with the lattice apron at the outer surface. The results show that both the negative pressure and friction factor of lattice apron at the outer surface have great impact on the compact effect. Increasing these two values from the lower ends, the campact quality is improved. However, after reaching the optimal compact effect, further increasing the two values would lead to the opposite result.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!