纺织学报 ›› 2017, Vol. 38 ›› Issue (09): 131-135.doi: 10.13475/j.fzxb.20161002106

• 机械与器材 • 上一篇    下一篇

刺辊锯齿螺旋倾角与分梳质量关系的理论研究

  

  • 收稿日期:2016-10-11 修回日期:2017-06-04 出版日期:2017-09-15 发布日期:2017-09-20

Theoretical study of influence of spiral angle of licker-in on carding quality

  • Received:2016-10-11 Revised:2017-06-04 Online:2017-09-15 Published:2017-09-20

摘要:

针对梳棉机刺辊分梳时刺辊锯齿的螺旋倾角使得锯齿倾斜分梳纤维层,易加重纤维损伤的问题,以单个锯齿为研究对象,对嵌入式和自锁式刺辊锯齿的分梳过程进行深入的理论分析,采用建立力学模型的方法对螺旋倾角为0°和θ 时纤维的受力情况进行研究。通过显式动力学模块对倾角为0°、1°、2°时锯齿的运动进行仿真。结果表明:当倾角为0°时,被梳纤维束所受的摩擦阻力及应力、应变均最小,且随着倾角的增大,摩擦阻力、应力及应变逐渐增大,束中纤维损伤越严重,纤维断裂概率越大;螺旋倾角的存在使得锯齿分解能力降低,易导致束纤维比例增大,分梳质量下降。

关键词: 梳棉机, 刺辊, 锯齿, 螺旋倾角, 显式动力学

Abstract:

Spiral angle of the licker-in caused the fiber bundles to be combed by slant saw-teeth, which made fibers to by more easily damaged during the carding process of the licker-in of carding machine. To solve the problem, single saw-tooth was regarded as an object of study, and the mosaic and self-locking carding process was theoretically analyzed. Fiber stress was reaearced by building mechanical model under condition of different spiral angles. Also, the carding process of single saw-tooth was simulated with explicit dynamics module when spiral angle was 0°, 1° and 2°, respectively. The results show that when spiral angle is 0°,the friction force, stress and strain of fiber were smallest, and the larger the spiral angle, the more seriously the fiber was damaged, and the probability of fiber fracture is increased. Due to the spiral angle, the carding capability of single saw-tooth is declined, and the percentage of bundle fibers is increased, leading to the worse coming quality.

Key words: carding machine, lider-in, saw blade, spiral angle, explicil dynamics

[1] 李新龙 马崇启 周宝明. 数字式梳棉机自调匀整控制系统开发[J]. 纺织学报, 2015, 36(08): 139-143.
[2] 曹继鹏 张志丹 孙鹏子. 锡林速度对盖板花纤维长度分布的影响[J]. 纺织学报, 2015, 36(03): 24-0.
[3] 于学智 曹继鹏 孙鹏子. 梳棉机盖板踵趾差对纱线毛羽的影响[J]. 纺织学报, 2013, 34(7): 35-39.
[4] 张明光;孙鹏子;曹继鹏. 梳棉机盖板速度对盖板花纤维长度分布的影响[J]. 纺织学报, 2011, 32(3): 47-50.
[5] 曹继鹏;王瑞;孙鹏子. 静电板电压和隔距对生条棉结的影响[J]. 纺织学报, 2010, 31(2): 101-105.
[6] 周国庆;蒋秀明;张建业;郑筱春;郭东亮;徐国胜. 高产梳棉机活动盖板悬垂问题的研究[J]. 纺织学报, 2009, 30(08): 128-133.
[7] 孙鹏子;曹继鹏. 全固定盖板梳棉机的研究进展[J]. 纺织学报, 2009, 30(05): 137-141.
[8] 李银星. 梳棉机运行状态的可拓判定研究[J]. 纺织学报, 2008, 29(6): 130-134.
[9] 张明光;孙鹏子;王兰. 梳针分梳板对杂质去除的影响[J]. 纺织学报, 2008, 29(5): 110-113.
[10] 张明光;孙鹏子. 不同型式棉网清洁器的对比研究[J]. 纺织学报, 2008, 29(4): 111-114.
[11] 孙鹏子;张明光;王兰. 梳针分梳板对纤维长度分布的影响[J]. 纺织学报, 2008, 29(11): 39-43.
[12] 孙鹏子;张明光;王兰. 梳针分梳板对棉结去除的影响[J]. 纺织学报, 2008, 29(10): 34-38.
[13] 邵敬党. 梳棉机后罩板处附加分梳装置的理论探讨[J]. 纺织学报, 2007, 28(6): 115-117.
[14] 孙鹏子;王兰;张志丹;张明光. 梳棉机刺辊落棉和盖板花纤维长度分布[J]. 纺织学报, 2006, 27(5): 80-83.
[15] 王兰;孙鹏子;张明光. 给棉板与刺辊隔距对纤维长度分布的影响[J]. 纺织学报, 2006, 27(4): 70-73.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!