纺织学报 ›› 2017, Vol. 38 ›› Issue (09): 45-50.doi: 10.13475/j.fzxb.20161101706

• 纺织工程 • 上一篇    下一篇

两面效应经编牛仔面料结构设计及其风格评价

  

  • 收稿日期:2016-11-07 修回日期:2017-04-29 出版日期:2017-09-15 发布日期:2017-09-20

Structure design and handle evaluation of warp knitted denim

  • Received:2016-11-07 Revised:2017-04-29 Online:2017-09-15 Published:2017-09-20

摘要:

针对靛蓝纱色牢度不高、贴近皮肤穿着易沾色及吸湿后皮肤有潮湿闷热感问题,同时为改善纬编牛仔面料尺寸稳定性差、线圈易脱散等缺点,以靛蓝纱和本白棉纱、异形截面和圆形截面涤纶黑丝与氨纶为原料,在四梳经编机上通过结构设计开发两面效应经编牛仔面料,使贴近皮肤的一面显露涤纶,另外一面显露棉纱。通过扫描电子显微镜对不同截面的涤纶表面进行表征,并对其拉伸性能进行比较;研究了面料的顶破性能、拉伸弹性回复性、吸湿速干性能,并利用PhabrOmeter 织物风格仪对风格特征进行评价。结果表明:靛蓝纱的强力高于本白棉纱,而毛羽指数降低了17.1%;异形截面涤纶显著提高了经编牛仔织物的滴水扩散速率、芯吸高度、手感和折痕回复性。

关键词: 经编牛仔, 两面效应, 结构设计, 滴水扩散速率, 折痕回复性, 风格评价

Abstract:

The indigo yarns have lower color fastness, stain the skin easily and made the skin the humid feeling after moisture absorption, and the weft knitted denim is easy to ladder and has bad dimensional stability. To solwv above problems, the warp knitted denim fabrics were designed with indigo and gray yarns, irregular circle cross-section polyester black yarns, and spandex on Tricot of Karl Mayer with the four bars to let polyester close to the skin and cotton yarn appear in other side. The surface of different cross-section polyester was characterized by scanning electron microscope. The tensile properties of polyester, indigo and gray cotton yarns were tested. The bursting stregth, tensile slastic resilience and moisture absorption properties were investigated. The handle of the fabric was evaluated by the PhabrOmeter. The results show that the hairiness index of indigo yarn has a reduction by 17.1% and the strength was higher compaued with the gray cotton yarn. The water absorbency ratio, vertical wicking height, handle and wrinkle recovery of the warp knitted denim fabric woth irregular cross-section polyester are impeoved notably.

Key words: warp knitted denim, two-sided effect, structure design, water absorbency ratio, wrinkle recovery rate, handle evaluation

[1] 刘杰 王府梅. 单向导湿机织物结构设计[J]. 纺织学报, 2018, 39(03): 50-55.
[2] 蒋志青 马延涛 郭亚 马建伟 陈韶娟. 仿针织牛仔面料的开发及性能评价[J]. 纺织学报, 2018, 39(03): 45-49.
[3] 周赳 张萌 金诗怡. 组合半遮盖提花结构设计原理与方法[J]. 纺织学报, 2017, 38(06): 40-45.
[4] 万爱兰 缪旭红 张灵婕 王委委. 外衣用棉经编织物结构设计与生产工艺[J]. 纺织学报, 2017, 38(05): 53-57.
[5] 胡毅 刘治君. 合体袖的内旋结构原理与制板方法[J]. 纺织学报, 2016, 37(11): 109-113.
[6] 赵蒙蒙 王丽霞. 圆装袖肩部造型结构设计[J]. 纺织学报, 2015, 36(12): 109-0.
[7] 孙艳丽 姚金波 李博 贾书刚. 羊毛角蛋白溶液在毛织物定型中的应用[J]. 纺织学报, 2015, 36(04): 97-0.
[8] 刘一萍 卢明 吴大洋. 外出哺乳衣设计要素分析[J]. 纺织学报, 2015, 36(04): 113-0.
[9] 张龙女 王云仪 李亿光. 油罐清洁连体作业服的开发和工效学评价[J]. 纺织学报, 2013, 34(8): 105-0.
[10] 苏丹 蒋高明 缪旭红. 三维整体经编夹芯结构预制件的制备工艺[J]. 纺织学报, 2013, 34(3): 59-65.
[11] 陈晓娜, 王建萍. 文胸结构设计及其影响因素[J]. 纺织学报, 2012, 33(8): 155-160.
[12] 岑科军 贾静静 孙家武 张聿. 基于L系统的3×3平纹分形组织设计应用方法[J]. 纺织学报, 2011, 32(11): 49-52.
[13] 吴厚林. 基于等分法的裤装结构设计[J]. 纺织学报, 2010, 31(8): 103-107.
[14] 丁锡强. 斜裁服装中的省道转移方法[J]. 纺织学报, 2010, 31(11): 109-115.
[15] 吴欣. 撇量移位在裤子结构设计中的应用[J]. 纺织学报, 2009, 30(11): 106-109.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!