纺织学报 ›› 2018, Vol. 39 ›› Issue (03): 61-66.doi: 10.13475/j.fzxb.20170603206

• 纺织工程 • 上一篇    下一篇

腈纶预氧化丝/芳纶针刺滤材的性能

  

  • 收稿日期:2017-06-09 修回日期:2017-12-05 出版日期:2018-03-15 发布日期:2018-03-09

Properties of pre-oxidized polyacrylonitrile / aramid fiber needled filters

  • Received:2017-06-09 Revised:2017-12-05 Online:2018-03-15 Published:2018-03-09

摘要:

为获得低成本、高效率空气过滤材料,制备了一种以腈纶预氧化丝为主,并混入不同质量分数芳纶的复合滤材,对其形态、纤维缠结性能、力学性能、透气性、孔径尺寸和过滤性能等进行表征和分析。结果表明:纤维的直线段长度可用来表征滤材纤维缠结程度;添加芳纶,提高了纤维缠结程度和滤材的致密性,提高了滤材断裂强力和
断裂伸长率,减小滤材孔径尺寸;对于粒径≧1.0 μm 和≧2.5 μm 的微粒,芳纶质量分数小于10% 时,复合滤材过滤效率无明显变化,芳纶质量分数大于10%时,复合滤材过滤效率随着芳纶质量分数增大而显著提高。

关键词: 腈纶预氧化丝, 芳纶, 过滤性能, 纤维缠结, 霍夫变换

Abstract:

In order to obtain a low cost and high efficiency filter, the composite filters were prepared from pre-oxidized (PAN) fiber mixed with aramid fiber of different weight percentages. The morphology, fiber entanglement, mechanical properties, air permeability, pore size distribution and filter efficiency were characterized. The results indicated that the length of straight fiber segment can be used to evaluate the degree of fiber entanglement. Adding aramid fiber can enhance fiber entanglement, filter compactness, breaking strength and breaking elongation of the filters, and decreased the pore size. For the particles with diameters above 1.0 μm and 2.5 μm, when the aramid fiber weight percentage is lower than 10%, the filter efficiency of composite filters has no obvious change. However, when the aramid fiber weight percentage is more than 10%, the filter efficiency of composite filters increased significantly with the increase of aramid fiber weight percentage.

Key words: pre-oxidized polyacrylonitrile fiber, aramid fiber, filter efficiency, fiber entanglement, Hough transform

[1] 朱金铭 钱建华 曹晨 曹原. 聚醚砜非织造布复合膜的空气过滤性能[J]. 纺织学报, 2018, 39(07): 55-62.
[2] 金关秀 张毅 楼永平 祝成炎. 应用粗糙集和支持向量机的熔喷非织造布过滤性能预测[J]. 纺织学报, 2018, 39(06): 142-148.
[3] 尉霞 逯凯美 董晓宁. 间位芳纶织物的导湿排汗整理[J]. 纺织学报, 2018, 39(05): 80-86.
[4] 王雯雯 刘基宏. 应用优化霍夫变换的细纱断头检测[J]. 纺织学报, 2018, 39(04): 36-41.
[5] 陈锋 姬忠礼 齐强强. 静电纺聚丙烯腈纳米纤维复合滤材的制备及其气液过滤性能[J]. 纺织学报, 2017, 38(09): 8-13.
[6] 申莹 邓炳耀 刘庆生 夏赛男 姚鹏飞. 不同填充密度的梯度结构复合滤材的制备及其性能[J]. 纺织学报, 2017, 38(07): 23-27.
[7] 杜玲玲 李婷婷 潘婧 周宝明 . 芳纶/不锈钢长丝包芯纱织物的制备及其防刺性能[J]. 纺织学报, 2017, 38(06): 33-39.
[8] 赵伟伟 汪滨 王娇娜 裴广玲 李从举. 静电纺聚酰胺6纳米纤维膜的制备及其性能[J]. 纺织学报, 2017, 38(03): 6-12.
[9] 余改丽 张弘楠 张娇娇 左晓飞 覃小红. 高效低阻聚丙烯腈/石墨烯纳米纤维膜的制备及其抗菌性能[J]. 纺织学报, 2017, 38(02): 26-33.
[10] 刘雷艮 潘志娟 牛建涛. 壳聚糖改性静电纺聚砜纤维膜对染料的过滤性能[J]. 纺织学报, 2016, 37(10): 1-7.
[11] 王敏 韩建 于斌 朱斐超 Solitario Nesti 宋卫民. 双组分橘瓣型纺粘水刺材料的过滤和力学性能[J]. 纺织学报, 2016, 37(09): 16-20.
[12] 李晓英 蒋高明 马丕波 聂小林. 三维横编间隔织物的编织工艺及其性能[J]. 纺织学报, 2016, 37(07): 66-70.
[13] 任煜 李猛 尤祥银. 驻极处理对聚乳酸熔喷材料性能的影响[J]. 纺织学报, 2015, 36(09): 13-17.
[14] 刘雷艮 沈忠安 洪剑寒. 静电纺高效防尘复合滤料的制备及其性能[J]. 纺织学报, 2015, 36(07): 12-0.
[15] 周冠辰 于斌 韩建 朱斐超. 玄武岩纤维/聚苯硫醚针刺复合滤料的聚四氟乙烯乳液处理[J]. 纺织学报, 2014, 35(8): 10-0.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!