纺织学报 ›› 2018, Vol. 39 ›› Issue (09): 77-83.doi: 10.13475/j.fzxb.20170901307

• 染整与化学品 • 上一篇    下一篇

基于液体分散染料的微量印花技术

    

  1.  
  • 收稿日期:2017-09-05 修回日期:2018-05-23 出版日期:2018-09-15 发布日期:2018-09-12
  • 基金资助:

     

Ultralow pollution micro-printing method based on liquid disperse dyes

  • Received:2017-09-05 Revised:2018-05-23 Online:2018-09-15 Published:2018-09-12

摘要:

针对涤纶直接印花污染问题,围绕微量印花工艺要求,制备了4 种液体分散染料和有机硅改性丙烯酸酯 黏合剂SA,考察了4 种液体分散染料的性能以及液体分散黄MR对合成增稠剂PTF-3 流变性及黏度的影响,探索 了黏合剂对市售分散蓝79 和液体分散蓝MR 染料固着率的影响,并测试了4 种液体分散染料色牢度,对比了市售 分散染料黄6G 对印花浆流变性以及经还原清洗的市售分散蓝79残液吸光度的变化。结果表明:自制的液体分散 染料具有较好的扩散性且不含禁用成分;黏合剂利于染料固着;采用含液体分散染料MR、黏合剂SA 和增稠剂的印 花色浆和热水洗后处理的微量印花工艺,具有良好的印花性能和优异的色牢度,可免除还原清洗,降低水资源 消耗。

关键词: 液体分散染料, 微量印花, 黏合剂, 增稠剂

Abstract:

 Aiming at the problem of high pollution problem of direct printing on polyester fabric, according to the process requirements of micro-printing, 4 liquid disperse dyes and acrylate binder SA modified by organic silicone were prepared. The properties of 4 liquid disperse dyes and the influcnce of liquid disperse blue MR on the rheology and viscosity of synthetic thickener PTF-3 were studied, and the influence of the binder on the dye uptake rate of commercial disperse blue 79 and liquid disperse blue MR were investigated. Moreover, the color fastness of 4 liquid disperse dyes were tested, and the influence of commercial disperse yellow 6G on the rheology of printing pulp and the change of the absorbency of the reduced and cleaned commercial disperse blue 79 residual liquid were compared. The results show that the self-prepared liquid disperse dyes have excellent diffusivity, and do not contain banned components. The binder is favourable to improve the percentage of dye uptake rate. The micro-printing process adopting printing color pulp containing liquid disperse dye MR, binder SA and thickener and the post-treatment by hot water washing has the advantages of good printing performance and color fastness, and can omit reduction and cleaning to reduce the water consumption.

Key words: liquid disperse dye, micro-printing, binder, low pollution, thickener

中图分类号: 

  •  
[1] 吴海婷 蒋小娟 蔡再生. 环保阻燃型静电植绒黏合剂的合成及其应用[J]. 纺织学报, 2018, 39(06): 96-100.
[2] 冯艳荣 袁剑民 王文力 李伟. 水性聚丙烯酸酯涂料染色黏合剂的合成及其性能[J]. 纺织学报, 2017, 38(04): 90-96.
[3] 龚小舟 郭依伦 吴中伟 高虹 姜联栋 陈晓钢. 经编间隔织物多层复合材料的防刺性能[J]. 纺织学报, 2014, 35(5): 55-0.
[4] 刘今强;万伟;李莎. 环保型超低含固率乳化糊的制备及其性能[J]. 纺织学报, 2010, 31(8): 61-67.
[5] 辛长征;盛杰侦;杨秀琴;王延伟. 纤维素基水刺非织造布在线发泡体系的研究[J]. 纺织学报, 2010, 31(8): 26-31.
[6] 汪澜;顾相军;吴明华;林俊雄. 无皂黏合剂乳液的合成及其在静电植绒中的应用[J]. 纺织学报, 2010, 31(1): 68-75.
[7] 董俊哲;房宽峻;张霞;付少海;田安丽;王潮霞;蒋学. GMA改性聚丙烯酸酯黏合剂的应用[J]. 纺织学报, 2007, 28(7): 62-64.
[8] 王凌;胡望明. 涤纶水刺非织造布的拒水整理与性能测试[J]. 纺织学报, 2007, 28(1): 84-86.
[9] 吕彤;吴赞敏;任仲涛. 丙烯酸酯预乳化半连续法乳液聚合研究[J]. 纺织学报, 2002, 23(04): 48-50.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 马世平. 基于MATLAB的六连杆打纬机构优化设计及仿真[J]. 纺织学报, 2006, 27(3): 40 -42 .
[2] 迟克栋;江红;罗欣;吴慧莉. 纺织品的电晕处理与表面润湿性研究[J]. 纺织学报, 2003, 24(06): 42 -43 .
[3] 张春芳. 松结构双层花呢的设计与生产[J]. 纺织学报, 2004, 25(03): 82 -83 .
[4] 杨弘;于延有;王新征;钟冠雄;谭灿荣. 对含糖原棉加热处理的试验探讨[J]. 纺织学报, 1992, 13(07): 24 -26 .
[5] 马惟哲. 异构计算环境的系统集成解决方案与实现[J]. 纺织学报, 2004, 25(03): 107 -109 .
[6] 张朝辉;李梅. 原棉性能与纱线强力的关系[J]. 纺织学报, 2005, 26(1): 52 -53 .
[7] 陆爱华. 纺织先进制造业信息化之探讨[J]. 纺织学报, 2004, 25(03): 123 -125 .
[8] 赵国庆. A172A、FU021型滤尘器及FU031回转过滤器鉴定会[J]. 纺织学报, 1984, 5(07): 55 .
[9] 张振义;吴瑜. 气流纺纱新工艺的技术经济分析[J]. 纺织学报, 1984, 5(09): 25 -29 .
[10] 郭秉臣. 毛纺直型精梳机圆梳的梳理速度及梳理效能的分析[J]. 纺织学报, 1984, 5(09): 30 -32 .