纺织学报 ›› 2018, Vol. 39 ›› Issue (10): 110-114.doi: 10.13475/j.fzxb.20171104505

• 服装工程 • 上一篇    下一篇

男衬衫袖口制作工艺优化及其应用

    

  1.  
  • 收稿日期:2017-11-23 修回日期:2018-05-31 出版日期:2018-10-15 发布日期:2018-10-17

Process optimization and practical application of man shirt cuff

  • Received:2017-11-23 Revised:2018-05-31 Online:2018-10-15 Published:2018-10-17

摘要:

针对男衬衫袖口部件中传统袖头长度制图方法不能与袖口尺寸完全匹配和袖衩制作工艺流程复杂且外观不平整美观等问题,对常见的4 种传统袖头长度制图方法和宝剑头袖衩工艺流程进行分析,借鉴开袋工艺制作先缝后剪的方法,进行袖衩工艺流程的优化设计,提出袖衩工艺的新方法,分别制作了不同宽度的袖衩,认为新的袖头长度计算方法应为袖口净尺寸与门襟袖衩宽之和较为合理。优化后的袖衩工艺方法和袖头制图方法提高了男衬衫袖口缝制的生产效率与外观平整度,同时该袖衩工艺和袖头制图方法也可应用到服装的其他部位,有助于提高企业生产效率。

关键词: 男衬衫, 袖口, 袖头, 袖衩

Abstract:

In view of the problem of incapabile matching in the cuff size by the conventional sleeve cap length drawing method for men's shirt cuffs, the complicated process and poor appearance of sleeve plackets, common four conventional sleeve cap size drawing methods and process flows of rooftop sleeve plackets were analyzed by virtue of the bag opening process of sewing firstly and then cutting, the optimization design of the process of sleeve plackets was carried out, and a novel method for the sleeve plackets process was put forward. Sleeve plakcets of different widths were made, and it is considered that it is reasonable to obtain a new sleeve cap size calculation method by the sum of the net size of the sleeve cuff and the width of the opening sleeve. The optimized process method of sleeve plackets and the drawing method of sleeve cap improve the production efficiency and appearance of the male shirt cuff. At the same time, the new method can also be applied to other parts of the garment, conducing to improve the production efficiency during the production process.

Key words: man shirt, sleeve cuff, sleeve cap, sleeve placket 

[1] 俞璐 王立川 陈雁. 服装生产过程碳排放量核算[J]. 纺织学报, 2016, 37(4): 160-0.
[2] 曹叶青 钱晓农 张宁 张苕珂. 淮阳泥泥狗艺术形式的男衬衫图案设计中的应用[J]. 纺织学报, 2016, 37(09): 111-116.
[3] 阎玉秀;金子敏. 男衬衫基型之研究[J]. 纺织学报, 2005, 26(3): 125-128.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 唐建国;李祚启;张曙光. 含铜聚丙烯睛基导电纤维稳定性的再研究[J]. 纺织学报, 1998, 19(03): 4 -6 .
[2] 陈惠兰;姚穆. 织物交织阻力与纰裂性能的分析和测试[J]. 纺织学报, 1992, 13(09): 13 -14 .
[3] 王盛奎. 染织物色深的探讨[J]. 纺织学报, 1998, 19(05): 31 -32 .
[4] 任永花.;刘颖;俞建勇. PTT短纤纱性能研究[J]. 纺织学报, 2006, 27(9): 62 -64 .
[5] 范雪荣;荣瑞萍;包小满;吴军华. FB-1涂料印花粘合剂的研制和应用性能研究[J]. 纺织学报, 1994, 15(07): 36 -39 .
[6] 王建刚;袁小红;甘应进;陈东生. 莲纤维的热学性能[J]. 纺织学报, 2010, 31(2): 7 -9 .
[7] 安秋凤.;高胜利;李临生;张西亚;金云霞;李明涛. 棉纤维表面氨基硅的膜形貌及其定向排列方式[J]. 纺织学报, 2007, 28(6): 8 -11 .
[8] 徐梅君. 台车上架空添纱针织物的编织[J]. 纺织学报, 1987, 8(01): 53 -56 .
[9] 南燕;张燕;施楣梧. 用非金属导电纤维开发纯涤纶抗静电织物[J]. 纺织学报, 2001, 22(02): 4 -6 .
[10] 高卫东;陈仲康. GA615型织机打纬机构的改进设计[J]. 纺织学报, 1995, 16(01): 38 -39 .