纺织学报 ›› 2019, Vol. 40 ›› Issue (01): 120-129.doi: 10.13475/j.fzxb.20180306210

• 服装工程 • 上一篇    下一篇

基于散乱点云的三维人体自动测量

鲍陈1, 缪永伟2(), 孙瑜亮1, 张旭东1   

  1. 1.浙江工业大学 计算机科学与技术学院, 浙江 杭州 310023
    2.浙江理工大学 信息学院, 浙江 杭州 310018
  • 收稿日期:2018-03-26 修回日期:2018-10-03 出版日期:2019-01-15 发布日期:2019-01-18
  • 通讯作者: 缪永伟
  • 作者简介:鲍陈(1983—),男,博士生。主要研究方向为计算机图形学、服装数字化技术。
  • 基金资助:
    国家自然科学基金项目(61272309);浙江理工大学科研基金项目(17032001-Y)

Automatic measurement of three-dimensional human body based on scattered point cloud

BAO Chen1, MIAO Yongwei2(), SUN Yuliang1, ZHANG Xudong1   

  1. 1. College of Computer Science and Technology, Zhejiang University of Technology, Hangzhou, Zhejiang 310023, China
    2. School of Information Science and Technology, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
  • Received:2018-03-26 Revised:2018-10-03 Online:2019-01-15 Published:2019-01-18
  • Contact: MIAO Yongwei

RichHTML

21

PDF (PC)

220

摘要：

为解决Kinect深度相机三维人体扫描重建中人体特征尺寸提取的问题,提出一种基于散乱点云的三维人体自动测量方案。首先,对采集三维点云数据进行预处理,经点云降采样、离群点滤波和表面重建,以及点云坐标转换,进而识别出人体正背面;然后,利用人体几何形状分析法,自动提取人体特征点和特征截面点云;最后,对得到的特征截面点云提取特征边界点,再通过基于凸壳的轮廓线提取算法得到特征边界线,通过三次B样条曲线拟合计算围度、弧长尺寸,利用坐标差值和欧氏距离计算长度尺寸,从而完成对三维人体点云模型的特征尺寸测量。结果表明,该方案受人体体型因素影响较小,所提出的尺寸信息的自动提取方案有效,并符合相关标准中测量精度的要求。

关键词: 散乱点云, 点云分割, 人体特征点, 三维人体测量

Abstract:

In order to solve the human body's characteristic size extraction in 3-D human body scanning reconstruction using Kinect depth camera, an automatic measurement scheme of 3-D human body size based on scattered point cloud was proposed. Firstly, the collected 3-D point cloud was preprocessed, and then the front and back surfaces of a human body were identified by point cloud desampling, outlier filtering, surface reconstruction and point cloud coordinate transformation. Then, the human body geometric shape analysis method was used to automatically extract human body's characteristic points and characteristic section point cloud. Finally, the characteristic boundary points were extracted from the obtained characteristic cross section point cloud, and then the characteristic boundary line was obtained by the contour extraction algorithm based on the convex hull, the girth and arc length were calculated through the cubic B-spline curve fittings, and the length was calculated by coordinate difference and Euclidean distance, so that the characteristic size measurement of the 3-D human body point cloud model was completed. The experiment results show that the scheme is less affected by human body shape factors, and the proposed automatic extraction scheme of size information is effective. The feasibility is verified according to the measurement accuracy requirements of related standard.

Key words: scattered point cloud, point cloud segmentation, characteristic point of human body, 3-D human body measurement

中图分类号: 

  • TS941.26

图1

人体尺寸测量系统装置"

图2

人体尺寸测量流程图"

图3

人体点云数据预处理 (a)Original point cloud; (b)Point cloud desampling, denoising, and surface reconstruction; (c)Point cloud coordinate transformation"

表1

人体特征点位置与身高之间比例"

特征点名称 特征点位置与身高的比例
男 女
头顶点 1.00 1.00
颈侧点 0.84 0.86
肩峰点 0.82 0.81
腋窝点 0.75 0.75
胸高点 0.72 0.72
腰侧点 0.61 0.63
臀凸点 0.53 0.53
会阴点 0.47 0.47
膝盖点 0.26 0.28
外踝点 0.05 0.05
脚点 0.00 0.00

图4

人体点云分割结果示意图 (a)Human body segmentation key points; (b) Human body segmentation result"

图5

颈根围线提取 (a)Oblique cross section neck base line; (b) Neck base line rotaled by 20°"

图6

判别边界特征点 (a)P is boundary point;(b)P is interior point"

图7

胸围凸包B样条拟合 (a)Chest circumference characteristic boundary line; (b)Chest circumference convex-hull fitting curve"

图8

腰围凸包B样条拟合 (a)Waist circumference characteristic boundary line; (b)Waist circumference convex-hull fitting curve"

图9

背宽凸包B样条拟合 (a)Back breadth characteristic boundary line; (b) Back breadth convex-hull fitting curve"

图10

交互测量界面"

表2

测量结果精密度分析"

测量
项目		 观察者(i) 均值 IQR 标准差 CV值/%
第1次 第2次 第3次 第4次 第5次
身高 169.06 168.97 169.17 169.42 168.82 169.09 0.20 0.225 544 0.13
胸围 87.83 87.96 88.14 87.72 88.32 87.99 0.31 0.240 167 0.27
腰围 79.02 79.14 79.17 78.80 79.46 79.12 0.15 0.240 250 0.30
臀围 93.09 93.16 93.26 92.43 92.81 92.95 0.35 0.335 336 0.36
肩宽 44.79 44.57 44.12 43.76 43.33 44.11 0.81 0.592 647 1.34
臂长 59.12 59.30 59.48 59.51 58.61 59.20 0.36 0.367 056 0.62
上身长 69.86 69.62 69.98 69.57 69.63 69.73 0.24 0.178 241 0.26
腿内侧长 75.12 75.06 74.77 74.92 74.86 74.95 0.20 0.143 457 0.19

图11

人体尺寸测量项目"

表3

测量的误差分析"

测量
项目		 本文方案
最大误差		 本文方案
最小误差		 本文方案
平均误差		 文献[4]
最大误差		 文献[18]
最大误差
身高 0.36 0.15 0.08 1.7
胸围 0.80 0.11 0.42 1.6 1.88
腰围 0.75 0.24 0.47 2.5 1.25
臀围 0.67 0.09 0.39 0.7 1.65
肩宽 0.85 0.31 0.78 1.6
臂长 0.38 0.1 0.21

图12

测量误差箱线图"

[1] 席焕久, 陈昭. 人体测量方法[M]. 北京: 科学出版社, 2010: 1-20.
XI Huanjiu, CHEN Zhao. Anthropometric Methods[M]. Beijing: Science Press, 2010: 1-20.
[2] ALLEN B, CURLESS P, POPOVI C Z. The space of human body shapes: reconstruction and parameterization from range scans[C]// Proceedings of ACM SIGGRAPH. San Diego: Acm Transactions on Graphics, 2003: 587-594.
[3] NURRE J H, CONNOR J, LEWARK E A, et al. On segmenting the three-dimensional scan data of a human body[J]. IEEE Transactions on Medical Imaging, 2000,19(8):787-797.
pmid: 11055802
[4] DEKKER L, DOUROS I, BUSTON B F. Building symbolic information for 3D human body modeling from range data[C]// International Conference on 3D Digital Imaging and Modeling. Ottawa: Institue of Electrical and Electronics Engineers, 1999: 388-397.
[5] LEONG I F, FANG J J, TSAI M J. Automatic body feature extraction from a maker-less scanned human body[J]. Computer-Aided Design, 2007,39(7):568-582.
doi: 10.1016/j.cad.2007.03.003
[6] MARKIEWICZ L, WITKOWSKI M, SITNIK R, et al. 3D anthropometric algorithms for the estimation of measurements required for specialized garment design[J]. Expert Systems with Applications, 2017,85:366-385.
doi: 10.1016/j.eswa.2017.04.052
[7] 陈国安, 刘飞, 李丽. 采用模糊规则的人体点云特征尺寸识别与提取[J]. 计算机辅助设计与图形学学报, 2011,23(8):1393-1399.
CHEN Guoan, LIU Fei, LI Li. Recognition and extraction of human body's feature dimensions using fuzzy rules[J]. Journal of Computer-Aided Design & Computer Graphics, 2011,23(8):1393-1399.
[8] TONG J, ZHOU J, LIU L, et al. Scanning 3-D full human bodies using Kinects[J]. IEEE Transactions on Visualization and Computer Graphics, 2012,18(4):643-650.
pmid: 22402692
[9] KOWALSKI M, NARUNIEC J, DANILUK M. LiveScan3D: a fast and inexpensive 3D data acquisition system for multiple kinect v2 sensors[C]// 2015 International Conference on 3D Vision. Lyon: Institue of Electrical and Electronics Engineers, 2015: 318-325.
[10] 伍龙华, 黄惠. 点云驱动的计算机图形学综述[J]. 计算机辅助设计与图形学学报, 2015,27(8):1341-1353.
WU Longhua, HUANG Hui. Survey on points-driven computer graphics[J]. Journal of Computer-Aided Design & Computer Graphics, 2015,27(8):1341-1353.
[11] WANG C C L, CHANG T K K, YUEN M M F. From laser-scanned data to feature human model: a system based on fuzzy logic concept[J]. Computer-Aided Design, 2003,35(3):241-253.
doi: 10.1016/S0010-4485(01)00209-3
[12] 葛宝臻, 郭华婷, 彭博, 等. 基于人体特征提取的模特体型尺寸自动测量方法[J]. 纺织学报, 2012,33(4):129-135.
GE Baozhen, GUO Huating, PENG Bo, et al. Automatic model style measurement based on automatic body feature extraction from 3-D scaning data[J]. Journal of Textile Research, 2012,33(4):129-135.
doi: 10.1177/004051756303300205
[13] ZHONG Y, XU B. Automatic segmenting and measurement on scanned human body[J]. International Journal of Clothing Science & Technology, 2006,18(1):19-30.
[14] 陈飞舟, 陈志杨, 丁展, 等. 基于径向基函数的残缺点云数据修复[J]. 计算机辅助设计与图形学学报, 2006,18(9):1414-1419.
CHEN Feizhou, CHEN Zhiyang, DING Zhan, et al. Filling holes in point cloud with radial basis function[J]. Journal of Computer-Aided Design & Computer Graphics, 2006,18(9):1414-1419.
[15] 钱锦锋, 陈志扬, 张三元, 等. 点云数据压缩中的边界特征检测[J]. 中国图象图形学报, 2005,10(2):164-169.
QIAN Jinfeng, CHEN Zhiyang, ZHANG Sanyuan, et al. The detection of boundary point of point cloud compression[J]. Journal of Image and Graphics, 2005,10(2):164-169.
[16] ROBINETTE K M, DAANEN H A. Precision of the CAESAR scan-extracted measurements[J]. Applied Ergonomics, 2006,37(3):259-265.
doi: 10.1016/j.apergo.2005.07.009 pmid: 16202970
[17] SHROUT P E, FLEISS J L. Intraclass correlations: uses in assessing rater reliability[J]. Pyschological Bulletin, 1979,86(2):420-428.
doi: 10.1037/0033-2909.86.2.420
[18] 李臻颖, 苏军强, 吴志明. 青年女体三维扫描数据的特征围度计算方法[J]. 纺织学报, 2017,38(5):110-114.
LI Zhenying, SU Junqiang, WU Zhiming. Calculating method of characteristics girth of young female body by 3-D scanning data[J]. Journal of Textile Research, 2017,38(5):110-114.
[1] 张吉生 吴志明 储云明. 经编无缝女束身上衣的塑身性能[J]. 纺织学报, 2014, 35(3): 109-0.
[2] 李晓志 李晓久. 基于部位划分的三维人体曲面模型的构建[J]. 纺织学报, 2013, 34(9): 145-0.
[3] 王晓霞 戴建国 王春霞 端丹. 青年女性体表角度分析[J]. 纺织学报, 2013, 34(7): 106-110.
[4] 陈益松 夏明 林琳. 光栅相移法用于三维人体测量的实验研究[J]. 纺织学报, 2013, 34(6): 83-87.
[5] 王珊珊 王鸿博. 基于三维人体测量的江浙在职男青年颈部形态[J]. 纺织学报, 2013, 34(10): 131-0.
[6] 张宁, 王宏付. 基于三维人体测量的江浙女模特体型分类[J]. 纺织学报, 2012, 33(6): 71-75.
[7] 张金花;王宏付. 基于三维人体测量的女性肩部研究[J]. 纺织学报, 2011, 32(5): 95-97.
[8] 郑娟;戴建国;徐蓉蓉;陈美珍;邵新阳. 立体裁剪专用松量模型的开发[J]. 纺织学报, 2011, 32(3): 105-109.
[9] 钱晓农;尹兵. 基于三维人体测量的人体体型细分识别的研究[J]. 纺织学报, 2011, 32(2): 107-111.
[10] 齐静;李毅;张欣. 我国西部地区青年男性体型描述与体型分类研究[J]. 纺织学报, 2010, 31(5): 107-111.
[11] 陈敏之;邹奉元;张渭源. 女体体型识别专家系统的设计与实现[J]. 纺织学报, 2009, 30(11): 141-144.
[12] 邹奉元;张苏豫;丁笑君;朱小行. 基于C/S模式的女子体型识别及应用[J]. 纺织学报, 2008, 29(6): 101-104.
[13] 梁素贞;张欣;陈东生. 文胸结构设计中主要细部尺寸的人体依据[J]. 纺织学报, 2008, 29(12): 69-73.
[14] 梁素贞.;张欣;周捷 . 基于三维人体测量的西部女大学生乳房基本形态[J]. 纺织学报, 2007, 28(8): 75-78.
[15] 许轶超;丁永生. 服装合体性评价的研究方法与应用进展[J]. 纺织学报, 2007, 28(10): 127-130.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号　 京公网安备11010502044800号
版权所有 © 2021 《纺织学报》编辑部
地址： 北京市朝阳区延静里中街3号主楼6层《纺织学报》杂志社　邮政编码：100025　
电话：010-65017711,65917740　传真：010-65016539　Email:fangzhixuebao@vip.126.com
本系统由北京玛格泰克科技发展有限公司设计开发