纺织学报 ›› 2019, Vol. 40 ›› Issue (11): 182-188.doi: 10.13475/j.fzxb.20181201407

• 综合述评 • 上一篇    

服装缝纫平整度的研究进展

肖平1,2,3, 钱伯丹1, 鲁虹1,2,3(), 张向辉1,2,3, 张媛1   

  1. 1.东华大学 服装与艺术设计学院, 上海 200051
    2.东华大学 现代服装设计与技术教育部重点实验室,上海 200051
    3.同济大学 上海国际设计创新研究院, 上海 200092
  • 收稿日期:2018-12-07 修回日期:2019-05-20 出版日期:2019-11-15 发布日期:2019-11-26
  • 通讯作者: 鲁虹
  • 作者简介:肖平(1979—),女,讲师。主要研究方向为服装人体工效学。
  • 基金资助:
    中央高校基本科研业务费专项资金资助项目(17D110710);中央高校基本科研业务费专项资金资助项目(2232019G-08);上海市设计学IV类高峰学科资助项目(DD18003);上海市设计学IV类高峰学科资助项目(DB18207);国家级大学生创新资助项目(17T10710)

Research progress on flatness of garment sewing

XIAO Ping1,2,3, QIAN Bodan1, LU Hong1,2,3(), ZHANG Xianghui1,2,3, ZHANG Yuan1   

  1. 1. College of Fashion and Design, Donghua University, Shanghai 200051, China
    2. Key Laboratory of Clothing Design and Technology, Ministry of Education, Donghua University, Shanghai 200051, China
    3. Shanghai Institute of Design and Innovation, Tongji University, Shanghai 200092, China
  • Received:2018-12-07 Revised:2019-05-20 Online:2019-11-15 Published:2019-11-26
  • Contact: LU Hong

RichHTML

15

PDF (PC)

238

摘要：

为有效评价服装缝纫外观质量,对国内外服装外观评价标准以及相关研究进行了梳理,分别从织物性能与缝纫条件2个方面归纳了表征服装外观质量级别的接缝外观平整度的影响因素,探讨了缝纫平整度的主观、客观评价方法,从多因子角度综合分析缝纫工艺因素对平整度的影响。认为需提高织物物理力学性能与织物缝纫褶皱等级之间的数学模型的精度,改进基于面料物理性能指标的平整度预测模型,开展曲线接缝服装部件的平整度研究,并建立服装外观质量智能评价新模型。同时从服装生产制作角度对服装缝纫平整度的研究方向进行展望。

关键词: 服装外观质量, 缝纫平整度, 织物性能, 缝纫条件, 平整度评价

Abstract:

In order to effectively evaluate the quality of sewing flatness of garments, the domestic and foreign clothing appearance evaluation standards and related research were sorted out. From two aspects of fabric performance and sewing conditions, the influence factors of flatness were summerized, and the evaluation methods of sewing flatness were discussed by subjective evaluation and objective evaluation.The influence of the sewing process factors on the flatness was comprehensively analyzed from a multi-factorial perspective. It is necessary to improve the accuracy of the mathematical model between the physical and mechanical properties of the fabric and the sewing wrinkle level of the fabric, improve the flatness prediction model based on the physical properties of the fabric, and seek the study of the flatness of the garment parts of the curved joint. It is proposed to establish a new model for the intelligent evaluation of garment appearance quality, and prospect the research direction of garment sewing flatness from the perspective of garment production and production, which provides a reference for the subsequent study of sewing flatness and garment making.

Key words: clothing appearance quality, sewing flatness, fabric property, sewing condition, flatness evaluation

中图分类号: 

  • TS941.17

图1

服装缝制皱褶的主要影响因素"

表1

国家标准与纺织行业服装标准的对比分析"

标准编号 标准名称 内容 特点 缺陷
GB/T 18132—2016 《丝绸服装》 主要表面缝制部位皱缩按照GSB16—2178丝绸服装缝制起皱5级样照规定 针对口袋、拉链、门襟、下摆,共计25个部位进行缩皱等级规定,各项不得低于4级 未有水洗前、后的缝制褶皱等级规定
GB/T 2660—2017 《衬衫》 1)针对各部位设定不同品类的起皱级别;
2)原料为全棉、全毛、棉/麻混纺时,在原有数值上,降低0.5,丝绸类衬衫不考虑起皱指标		 1)对衬衫各部件设置优等品、一等品、合格品的起皱级别限定;
2)对于洗涤前、洗涤后具有明确的起皱级别规定		 一些易起皱部位如袖窿等,未有明确的起皱级别指标
GB/T 2664—2017 《男西服、大衣》 部件缝制皱缩参照《男西服外观起皱样照》规定 干洗后起皱级别优等品>4级,一等品≥4级,合格品≥3级 无洗涤前起皱级别的规定
GB/T 14272—2011 《羽绒服》 部位缝制皱褶按《羽绒服装外观疵点及缝制起皱五级样照》规定 各部位平整度等级不低于3级 平整度优等品、一等品等无明确等级规定
FZ/T 73056—2016 《针织西服》 针织西服外观平整度、接缝外观平整度参照GB/T 13769、GB/T 13771 外观平整度、缝纫外观平整度、水洗后黏合衬质量有明确的指标要求 无部件的缝制平整度等级的规定
FZ/T 81004—2003 《连衣裙、裙套》 各部位缝制平服、顺直、整齐、牢固 阐述各个部件的缝制质量要求 无明确的起皱级别规定
FZ/T 81006—2017 《牛仔服装》 各部位缝制不平服为轻微缺陷 针对轻缺陷、重缺陷、严重缺陷阐述各个部件的缝制质量要求 无明确的起皱级别规定
FZ/T 81008—2011 《茄克衫》 各部位缝制平服、线路顺直整齐 洗涤干燥后外观平整度,优等品≥3级,其他不考虑;
洗涤干燥后接缝外观质量,优等品≥4级,一等品、合格品≥3级		 无部件的缝制平整度等级的规定
FZ/T 81010—2009 《风衣》 表面部件缝制皱缩按照《男西服外观起皱样照》规定 干洗后起皱级别优等品5级,一等品≥4级,合格品≥3级 无干洗前起皱级别的规定

图2

客观评价方法"

[1] MOUSAZADEGAN F, SAHARKHIZ S, LATIFI M, et al. Seam pucker rating by deconvolution residual method[J]. International Journal of Clothing Science and Technology, 2012,25(3):150-170.
[2] 常婷. 大豆蛋白纤维机织面料缝纫平整度的研究[D]. 杭州:浙江理工大学, 2011:5-15.
CHANG Ting. Research on the sewing flatness of soybean protein fiber woven fabric [D]. Hangzhou:Zhejiang Sci-Tech University, 2011:5-15.
[3] SÜLAR V, MESEGÜL C, KEFSIZ H, et al. A comparative study on seam performance of cotton and polyester woven fabrics[J]. Journal of The Textile Institute, 2015,106(1):19-30.
doi: 10.1080/00405000.2014.899079
[4] CHOUDHARY A K, GOEL A. Effect of some fabric and sewing conditions on apparel seam characteristics[J]. Journal of Textiles, DOI: 10.1155/2013/157034.
[5] LIU X S, XING T L, XU D M, et al. Study on novel eco-friendly anti-creasing agents for natural silk fabric[J]. Chinese Chemical Letters, 2012,23(6):665-668.
doi: 10.1016/j.cclet.2012.04.013
[6] KIM H A, KIM S J. Seam pucker and formability of the worsted fabrics[J]. Fibers and Polymers, 2011,12(8):1099-1105.
[7] KAWABATA S, MORI M, NIWA M. An experiment on human sensory measurement and its objective measurement[J]. International Journal of Clothing Science and Technology, 1997,9(3):203-206.
[8] BEHERA B K. Role of fabric properties in the clothing-manufacturing Process[M]// Garment Manufacturing Technology. Oxford: Woodhead Pulishing, 2015: 59-80.
[9] HATI S, DAS B R. Seam pucker in apparels: a critical review of evaluation methods[J]. Asian Journal of Textile, 2011,1(2):60-73.
[10] NASSIF G A A. Effect of weave structure and weft density on the physical and mechanical properties of micro polyester woven fabrics[J]. Life Science Journal, 2012,9(3):1326-1331.
[11] 吴巧英. 薄丝织物缝纫平整度与织物结构及性能的相关性研究[D]. 上海:东华大学, 2013:21-45.
WU Qiaoying. Correlation between the flatness of thin silk fabric sewing and fabric structure and performance[D]. Shanghai: Donghua University, 2013:21-45.
[12] LO W M, HU J L. Shear properties of woven fabrics in various directions[J]. Textile Research Journal, 2002,72(5):383-390.
[13] MUKHOPADHYAY A, SIKKA M, KARMAKAR A K. Impact of laundering on the seam tensile properties of suiting fabrics[J]. International Journal of Clothing Science and Technology, 2004,16(4):394-403.
[14] NAYAK R, PADHYE R, DHAMIJA S, et al. Sewability of air-jet textured sewing threads in denim[J]. Journal of Textile and Apparel Technology and Management (JTATM), 2013,8(1):1-11.
[15] TARAFDAR N, ROY A, SARKAR T. Study of sew ability parameters of different shirting fabrics[J]. Man-made Textiles in India, 2005,48(12):463-467.
[16] 高雪莲, 吴巧英, 武利利. 薄型丝织物结构和性能与缝纫缩皱的关系[J]. 丝绸, 2011,48(3):22-25.
GAO Xuelian, WU Qiaoying, WU Lili. Relationship between structure and properties of thin silk fabrics and sewing wrinkles[J]. Journal of Silk, 2011,48(3):22-25.
[17] 徐麟健. 针织服装缝口缩皱成因分析及解决方法[J]. 针织工业, 2012(1):55-57.
XU Linjian. Analysis and solution of the shrinkage of seams in knitted garments[J]. Knitting Industries, 2012(1):55-57.
[18] EBRAHIM F, FATHY S. Influence of mechanical properties of cotton fabrics on seam quality[J]. Life Science Journal, 2012,9(2):831-836.
doi: 10.1016/0024-3205(70)90339-5
[19] 朱柳静, 吴巧英, 高雪莲. 轻薄丝织物斜向力学性能及缝纫缩皱研究[J]. 丝绸, 2010(3):20-23.
ZHU Liujing, WU Qiaoying, GAO Xuelian. Study on the oblique mechanical properties and sewing shrinkage of lightweight silk fabrics[J]. Journal of Silk, 2010(3):20-23.
[20] JUCIENE M, RADAVICIENE S, SACEVICIENE V, et al. The research on surface non-uniformity of textile systems[J]. International Journal of Clothing Science and Technology, 2016,28(1):36-46.
[21] DOBILAITE V, JUCIENE M. The influence of mechanical properties of sewing threads on seam pucker[J]. International Journal of Clothing Science and Technology, 2006,18(5):335-345.
[22] MOUSAZADEGAN F, LATIFI M. Investigating the relation of fabric’s buckling behaviour and tension seam pucker formation[J]. Journal of The Textile Institute, 2019,110(4):562-574.
[23] NASSIF N A A. Evaluation of seam pucker of woven cotton fabrics using two different methods[J]. Journal of American Science, 2013,9(4):205-210.
[24] MIDHA V K, SURESH K S. Effect of seam angle on seam puckering in lightweight woven fabrics[J]. Journal of The Textile Institute, 2015,106(4):395-401.
doi: 10.1080/00405000.2014.924224
[25] 倪红. 毛精纺面料的缝纫平整度与缝纫条件的关系[J]. 纺织学报, 2008,29(3):80-82,91.
NI Hong. The relationship between sewing flatness and sewing conditions of wool worsted fabrics[J]. Journal of Textile Research, 2008,29(3):80-82,91.
[26] DOBILAITE V, JUCIENE M. Influence of sewing machine parameters on seam pucker[J]. Tekstil, 2007,56(5):286-292.
[27] 顾朝晖, 雒少娜. 针织服装面料缝制工艺参数的确定[J]. 纺织学报, 2015,36(9):94-99.
GU Zhaohui, LUO Shaona. Determination of sewing process parameters of knitted fabrics[J]. Journal of Textile Research, 2015,36(9):94-99.
doi: 10.1177/004051756603600113
[28] PARK C K, HA J Y. A process for optimizing sewing conditions to minimize seam pucker using the Taguchi method[J]. Textile Research Journal, 2005,75(3):245-252.
doi: 10.1177/004051750507500310
[29] STYLIOS G, SOTOMI O J. A neural network approach for the optimization of the sewing process of wool and wool mixture fabrics[C]// Proceedings of 1st China International Wool Textile Conference. Xi'an: China Textile Association, 1994: 689-696.
[30] SHILOH M. The evaluation of seam-puckering[J]. Journal of The Textile Institute, 1971,62(3):176-180.
doi: 10.1080/00405007108630042
[31] GALUSZYNSKI S. Effect of fabric structure on fabric resistance to needle piercing[J]. Textile Research Journal, 1986,56(5):339-340.
doi: 10.1177/004051758605600511
[32] BERTOLDI A, MUNDEN D. The effects of sewing variables on fabric pucker[J]. Clothing Research Journal, 1974,2(1):68-73.
[33] 陈丽丽. 精纺毛织物缝纫平整度客观评价方法[J]. 纺织学报, 2018,39(3):120-125.
CHEN Lili. Objective evaluation method for sewing flatness of worsted wool fabrics[J]. Journal of Textile Research, 2018,39(3):120-125.
[34] MOHRI M, RAVANDI S A H, YOUSSEFI M. Objective evaluation of wrinkled fabric using radon transform[J]. Journal of The Textile Institute, 2005,96(6):365-370.
doi: 10.1533/joti.2004.0066
[35] YANG X B, HUANG X B. Evaluating fabric wrinkle degree with a photometric stereo method[J]. Textile Research Journal, 2003,73(5):451-454.
doi: 10.1177/004051750307300513
[36] KANG T J, CHO D H, KIM S M. New objective evaluation of fabric smoothness appearance[J]. Textile Research Journal, 2001,71(5):446-453.
doi: 10.1177/004051750107100513
[37] XU B, CUMINATO D F, KEYES N M. Evaluating fabric smoothness appearance with a laser profilometer[J]. Textile Research Journal, 1998,68(12):900-906.
doi: 10.1177/004051759806801204
[38] AMIRBAYAT J, ALAGHA M J. Objective assessment of wrinkle recovery by means of laser triangulation[J]. Journal of The Textile Institute, 1996,87(2):349-355.
doi: 10.1080/00405009608659087
[39] KANG T J, KIM S C, SUL I H, et al. Fabric surface roughness evaluation using wavelet-fractal method: part I: wrinkle, smoothness and seam pucker[J]. Textile Research Journal, 2005,75(11):751-760.
[40] KIM M, SUL I H, KIM S. Development of a sewing machine controller for seam pucker reduction using online measurement feedback system[J]. Journal of Engineered Fibers and Fabrics, 2017,12(2):67-72.
[41] 李艳梅, 张渭源. 小波分析在织物缝纫平整度客观评价中的应用[J]. 纺织学报, 2009,30(10):115-119.
LI Yanmei, ZHANG Weiyuan. Application of wavelet analysis in objective evaluation of fabric sewing flat-ness[J]. Journal of Textile Research, 2009,30(10):115-119.
[42] SUN J, YAO M, XU B, et al. Fabric wrinkle characterization and classification using modified wavelet coefficients and support-vector-machine classifiers[J]. Textile Research Journal, 2011,81(9):902-913.
doi: 10.1177/0040517510391702
[43] KOEHL L, MIOU J C, ZENG X. Selecting relevant features from fabric images for automated quality control of seam puker using data analysis and human experts grading[M]// Computational Textile. Berlin: Springer, 2007:39-54.
[44] PAN R, GAO W, LI W, et al. Image analysis for seam-puckering evaluation[J]. Textile Research Journal, 2017,87(20):2513-2523.
doi: 10.1177/0040517516673330
[45] FERNANDO S, JAYAWARDENA T. Measurement of seam puckering and influence of its causes[J]. Journal of Engineering, 2014(4):1-7.
[46] HUI C L, NG S F. Predicting seam performance of commercial woven fabrics using multiple logarithm regression and artificial neural networks[J]. Textile Research Journal, 2009,79(18):1649-1657.
doi: 10.1177/0040517509104758
[47] MARIOLIS I G, DERMATAS E S. Automatic classification of seam pucker images based on ordinal quality grades[J]. Pattern Analysis and Applications, 2013,16(3):447-457.
[48] 张宁, 潘如如, 高卫东. 采用图像处理的织物缝纫平整度自动评估[J]. 纺织学报, 2017,38(4):145-150.
ZHANG Ning, PAN Ruru, GAO Weidong. Automatic evaluation of fabric sewing flatness by image processing[J]. Journal of Textile Research, 2017,38(4):145-150.
[49] PAVLINIĆ D Z, GERŠAK J, DEMŠAR J, et al. Predicting seam appearance quality[J]. Textile Research Journal, 2006,76(3):235-242.
[50] JIANG H, LI J, CHAI Z, et al. Objective assessment for characterising the flatness of garment sewing stitches[J]. Autex Research Journal, 2013,13(4):110-117.
[1] 许多, 卫江, 梅剑香, 张心伶, 张又青, 徐卫林, 刘可帅. 柔洁纺粘胶强捻纱及其织物性能[J]. 纺织学报, 2019, 40(10): 48-55.
[2] 李新彤 丛洪莲. 针织西服面料设计及其性能[J]. 纺织学报, 2018, 39(12): 47-52.
[3] 陈丽丽. 精纺毛织物缝纫平整度客观评价方法[J]. 纺织学报, 2018, 39(03): 120-125.
[4] 白刚 刘艳春. 触感清凉棉织物的制备及其性能[J]. 纺织学报, 2018, 39(01): 94-97.
[5] 张宁 潘如如 高卫东. 采用图像处理的织物缝纫平整度自动评估[J]. 纺织学报, 2017, 38(04): 145-150.
[6] 杜晓谊 张丽平 田安丽 李敏 付少海. 导电涤纶涂层织物的制备及其性能[J]. 纺织学报, 2016, 37(10): 78-82.
[7] 王花娥. 集圈工艺参数对单面集圈织物性能的影响[J]. 纺织学报, 2016, 37(08): 54-58.
[8] 刘丽妍 陈玉平 付京涛. 黄麻混织针织物的设计与开发[J]. 纺织学报, 2014, 35(10): 46-0.
[9] 张广知, 黄小华. 纯棉染色蓬盖布潮态汽蒸阻燃整理[J]. 纺织学报, 2012, 33(5): 86-90.
[10] 徐利平. 针织滚边领延伸性影响因素分析[J]. 纺织学报, 2012, 33(2): 94-97.
[11] 王海英;李栋. 棉织物的轧-蒸潮态抗皱整理[J]. 纺织学报, 2011, 32(5): 91-94.
[12] 凌群民;谭磊. 后整理工艺对纯苎麻针织物性能的影响[J]. 纺织学报, 2010, 31(7): 91-96.
[13] 李艳梅;张渭源. 小波分析在织物缝纫平整度客观评价中的应用[J]. 纺织学报, 2009, 30(10): 115-119.
[14] 潘永惠;包芳;王士同. 基于改进RBF网络的缝纫平整度模糊辩识系统[J]. 纺织学报, 2008, 29(3): 76-79.
[15] 倪红. 毛精纺面料的缝纫平整度与缝纫条件的关系[J]. 纺织学报, 2008, 29(3): 80-82.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号　 京公网安备11010502044800号
版权所有 © 2021 《纺织学报》编辑部
地址： 北京市朝阳区延静里中街3号主楼6层《纺织学报》杂志社　邮政编码：100025　
电话：010-65017711,65917740　传真：010-65016539　Email:fangzhixuebao@vip.126.com
本系统由北京玛格泰克科技发展有限公司设计开发