3D打印纬平针面料的制备

doi:10.13475/j.fzxb.20210400305

纺织学报 ›› 2022, Vol. 43 ›› Issue (09): 115-119.doi: 10.13475/j.fzxb.20210400305

3D打印纬平针面料的制备

程燕婷¹^,², 孟家光¹^,²(), 薛涛¹^,², 支超¹^,²

1.西安工程大学纺织科学与工程学院, 陕西西安 710048
2.西安工程大学功能性纺织材料及制品教育部重点实验室, 陕西西安 710048

收稿日期:2021-04-02 修回日期:2022-05-04 出版日期:2022-09-15 发布日期:2022-09-26
通讯作者: 孟家光
作者简介:程燕婷(1991—),女,工程师,硕士。主要研究方向为纺织新材料、新工艺、新技术的研究及3D打印面料。
基金资助:
陕西省科技创新领军人才科研项目(2018033);陕西省自然科学基础研究计划资助项目(2019JQ-182);陕西省自然科学基础研究计划资助项目(2018JQ5214);陕西省教育厅科研计划资助项目(18JS039);中国纺织工业联合会科技指导性项目(2018083);中国纺织工业联合会科技指导性项目(2020046);中国纺织工业联合会科技指导性项目(2020044);陕西省重点研发计划项目(2020GY-312)

Preparation of 3D printed weft plain knitted fabric

CHENG Yanting¹^,², MENG Jiaguang¹^,²(), XUE Tao¹^,², ZHI Chao¹^,²

1. School of Textile Science and Engineering, Xi'an Polytechnic University, Xi'an, Shaanxi 710048, China
2. Key Laboratory of Functional Textile Material and Product, Ministry of Education, Xi'an Polytechnic University, Xi'an, Shaanxi 710048, China

Received:2021-04-02 Revised:2022-05-04 Published:2022-09-15 Online:2022-09-26
Contact: MENG Jiaguang

摘要/Abstract

摘要：

为研究3D打印服装面料中纬平针组织的结构,预测打印效果,促进针织面料数字化和智能化生产,将3D打印技术应用到针织面料设计和生产中。采用3ds Max软件,根据NURBS曲线建模的方法,结合Peirce线圈模型对纬平针组织进行三维模拟,通过模拟实现了3D打印纬平针面料的可视化,可预测打印效果。采用Repetier-Host软件,对模拟的3D打印纬平针组织模型切片,采用熔融层积成型技术,通过设置打印参数对模型切片数据进行打印,得到3D打印纬平针组织针织面料。结果表明:该打印面料的效果与模拟效果高度吻合,线圈之间嵌套关系明显,打印面料光滑平整,打印精度高,属于环境友好型面料。

关键词: 纬平针组织, 三维模拟, 熔融层积成型技术, 3D打印面料, 聚乳酸材料

Abstract:

In order to study the structure of weft plain knitted clothing fabrics produced by 3D printed, predict its printing effect and improve the digital and intelligent production of knitting fabrics, 3D printing technology was applied to the design and production of knitting fabrics. 3ds Max software was used to model the weft plain knitted fabric based on the NURBS curve modeling method and the Peirce loop model. The visualization of 3D printed weft plain knitted fabric was achieved and the printing effect was able to be predicted through simulation. Repetier-Host software was used to slice the simulated 3D printed weft plain knitted fabric model. The printing parameters were set and the model slice data was printed by fused deposition modeling technology, the 3D printed weft plain knitted fabrics were obtained. The results show that the effect of the printed fabrics is highly consistent with the simulated effects, and the intermeshing relationship between the loops is obvious. The printed fabrics are smooth and flat and the printing accuracy is high. The printed fabrics are environmental friendly fabrics.

Key words: weft plain knitted structure, three-dimensional simulation, fused deposition modeling technology, 3D printed fabric, polylactic acid material

中图分类号:

TS184

程燕婷, 孟家光, 薛涛, 支超. 3D打印纬平针面料的制备[J]. 纺织学报, 2022, 43(09): 115-119.

CHENG Yanting, MENG Jiaguang, XUE Tao, ZHI Chao. Preparation of 3D printed weft plain knitted fabric[J]. Journal of Textile Research, 2022, 43(09): 115-119.

图/表 8

图1

图2

图3

图4

表1

图5

图6

图7

参考文献 11

[1]	丁骁垚, 樊黎霞, 陆星宇. 含能材料3D打印机喷嘴参数对挤出速度的影响[J]. 机械设计与制造, 2018(6):74-77.
	DING Xiaoyao, FAN Lixia, LU Xingyu. Parameter analysis in extrusion rate of energetic material 3D printer's nozzle flow[J]. Machinery Design and Manufacture, 2018(6): 74-77.
[2]	RETOLAZA J, ANSOLA R, GÓMEZ J L, et al. Identifying elastic constants for PPS technical material when designing and printing parts using FDM technology[J]. Materials, 2021. DOI: 10.3390/ma14051123. doi: 10.3390/ma14051123
[3]	THAN Y M, TITAPIWATANAKUN V. Tailoring immediate release FDM 3D printed tablets using a quality by design (QbD) approach[J]. International Journal of Pharmaceutics, 2021. DOI: 10.1016/j.ijpharm.2021.120402. doi: 10.1016/j.ijpharm.2021.120402
[4]	TOSTO C, SAITTA L, PERGOLIZZI E, et al. Fused deposition modelling (FDM): new standards for mechanical characterization[J]. Macromolecular Symposia, 2021. DOI: 10.1002/masy.2000253. doi: 10.1002/masy.2000253
[5]	王燕兰, 任翀, 张巍, 等. 响应曲面法FDM碳纤维增强ABS制件精度研究[J]. 现代制造工程, 2021(2):16-20,42.
	WANG Yanlan, REN Chong, ZHANG Wei, et al. Research on precision of FDM carbon fiber reinforced ABS parts by response surface method[J]. Modern Manufacturing Engineering, 2021(2):16-20,42.
[6]	文周, 薛美贵, 王旭红. 基于田口试验法的熔融沉积成型PLA制品工艺优化[J]. 工程塑料应用, 2021, 49(1): 58-62.
	WEN Zhou, XUE Meigui, WANG Xuhong. Optimization of PLA product process by melt deposition based on taguchi test[J]. Engineering Plastics Application, 2021, 49(1): 58-62.
[7]	孙浩程, 崔玉磊, 王宜迪, 等. 生物基可降解塑料物理改性研究进展[J]. 现代塑料加工应用, 2021, 33(1): 56-59.
	SUN Haocheng, CUI Yulei, WANG Yidi, et al. Research progress on physical modification of bio-based degradable plastics[J]. Modern Plastics Processing and Applications, 2021, 33(1): 56-59.
[8]	VIDOTTO M, MIHALJEVIĆ B, ŽAUHAR G, et al. Effects of γ-radiation on structure and properties of poly (lactic acid) filaments[J]. Radiation Physics and Chemistry, 2021. DOI: 10.1016/j.radphyschem.2021.109456. doi: 10.1016/j.radphyschem.2021.109456
[9]	PERRY Anna. 3D-printed apparel and 3D-printer: exploring advantages, concerns, and purchases[J]. International Journal of Fashion Design: Technology and Education, 2018, 11(1): 95-103. doi: 10.1080/17543266.2017.1306118
[10]	GAWE A, KUCIEL S. The study of physico-mechanical properties of polylactide composites with different level of infill produced by the FDM method[J]. Polymers, 2020. DOI: 10.3390/polym12123056. doi: 10.3390/polym12123056
[11]	居婷婷. 毛衫织物线圈结构建模与仿真研究[D]. 杭州: 浙江理工大学, 2012: 3-5.
	JU Tingting. Research of modeling and simulation for jersey fabric'c loop structure[D]. Hangzhou: Zhejiang Sci-Tech University, 2012: 3-5.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed

控制点	X/mm	Y/mm	Z/mm
N₁	0.000	0.000	0.000
N₂	1.080	0.162	0.000
N₃	1.500	0.762	0.720
N₄	1.080	0.162	0.720
N₅	0.600	2.400	0.720
N₆	1.080	3.00	0.000
N₇	1.920	3.120	0.000
N₈	2.760	3.000	0.000
N₉	3.240	2.400	0.720
N₁₀	2.760	1.602	0.720
N₁₁	2.340	0.760	0.720
N₁₂	2.760	0.162	0.000
N₁₃	3.840	0.000	0.000

3D打印纬平针面料的制备

Preparation of 3D printed weft plain knitted fabric

RichHTML

PDF (PC)

摘要/Abstract

引用本文

使用本文

图/表 8

参考文献 11

相关文章 9

Metrics

本文评价

推荐阅读 0

[1]	沙莎蒋高明. 纬编针织物三维模拟技术的研究现状与发展趋势[J]. 纺织学报, 2016, 37(11): 166-172.
[2]	谷大鹏杨育林范兵利陈素文. 平纹机织物空间参数化模型及仿真[J]. 纺织学报, 2012, 33(10): 37-42.
[3]	韩冲;孟婥;陈广锋;孙以泽 . 多圈高簇绒地毯外观的三维仿真[J]. 纺织学报, 2009, 30(9): 127-132.
[4]	瞿畅;王君泽;李波. 纬编针织物基本组织的计算机三维模拟[J]. 纺织学报, 2009, 30(11): 136-140.
[5]	刘夙;龙海如. 纬平针织物的计算机三维模拟[J]. 纺织学报, 2007, 28(12): 41-44.
[6]	修毅;李长锋. 基于质点刚性杆模型的织物三维模拟[J]. 纺织学报, 2007, 28(10): 112-116.
[7]	诸葛振荣;杜淑峰. 基于OpenGL的组织图三维模拟显示[J]. 纺织学报, 2003, 24(04): 89-91.
[8]	诸葛振荣;刘阳飞. 纹织物真实感模拟的研究[J]. 纺织学报, 2003, 24(03): 30-32.
[9]	郑天勇;黄故. 机织物外观分析及计算机三维模拟[J]. 纺织学报, 2001, 22(02): 40-42.