纺织学报 ›› 2005, Vol. 26 ›› Issue (6): 107-108.

• 生产技术 • 上一篇    下一篇

三维机织热塑复合材料的制作与性能

董卫国,黄故   

  1. 天津工业大学天津市先进纺织复合材料重点实验室 天津300160
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2005-12-15 发布日期:2005-12-15

Manufacture and performance of 3D-woven thermoplastic composite material

DONG Wei-Guo;HUANG Gu   

  1. Tianjin Key Laboratory of Advanced Textile Composite Materials;Tianjin Polytechnic University;Tianjin 300160;China
  • Received:1900-01-01 Revised:1900-01-01 Online:2005-12-15 Published:2005-12-15

摘要: 设计了一种以包芯编带纱为中间体制作三维机织热塑复合材料的方法。对复合材料的空隙率、拉伸、弯曲性能进行了实验和分析。研究表明,包芯编带纱既能满足热塑树脂的均匀渗透,又具有良好的三维织造性能;三维机织热塑复合材料的刚度较低,预拉伸工艺可以显著提高复合材料的拉伸刚度和弯曲刚度。

Abstract: A kind of manufacturing technology of 3D-woven thermoplastic composite material was designed,and the micro-braided yarn was taken as the medium.The void content,elongation,and bending properties of the composite material were examined.The results indicated that the micro-braided yarn is suitable for even impregnation of resin and has good 3D-weaving performance.Since the 3D-woven thermoplastic composite material exhibits low rigidity,pre-drawing of it can remarkably improve its elongation and bending rigidity.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!