纺织学报 ›› 2005, Vol. 26 ›› Issue (6): 96-98.

• 生产技术 • 上一篇    下一篇

用普通织机开发花式纱罗产品

张国辉   

  1. 南通职业大学 江苏南通226007
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2005-12-15 发布日期:2005-12-15

Development of leno brocade products with ordinary loom

ZHANG Guo-hui   

  1. Nantong Vocational College;Nantong;Jiangsu 226007;China
  • Received:1900-01-01 Revised:1900-01-01 Online:2005-12-15 Published:2005-12-15

摘要: 介绍了利用普通织机生产花式纱罗织物的方法,包括制作安装第2只织轴,设计产品工艺参数,制作专用钢筘和绞经张力控制系统,纱线的选用,上机图的合理绘制,经纱上浆,准备和织造生产中需要注意的要点等。花式纱罗织物生产中最重要的是控制好基综提起时,张力调节杆向前运动的量,使其释放出相应长度的绞经纱,满足开清梭口的需要;其次还要选用合适的浆料,并保证浆纱的质量。

Abstract: This paper introduced how to produce leno brocade products with the ordinary loom.The work included making and fixing the second beam,technological design of products,making the leno reed according to the technological design,manufacturing tension control system for crossing warp,yarn selection, drafting the reasonable looming draft,and warp sizing.The key points which should be paid more attention to during the production from preparation to weaving were also discussed.Apart from selecting suitable sizing ingredients for quality sizing,the most important thing during the leno production is to command the amount of tension regulating-rod moving forward when the first crossing heald rising up,let it provide the corresponding length of crossing warp,to meet the need of clear shed.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!