纺织学报 ›› 2006, Vol. 27 ›› Issue (10): 84-88.

• 测试分析 • 上一篇    下一篇

旋流纺输送管道形状和尺寸对成纱质量的影响

葛明桥;庄建国;李永贵;顾闻彦   

  1. 江南大学教育部生态纺织重点实验室 江苏无锡214122
  • 收稿日期:2005-12-01 修回日期:2006-02-28 出版日期:2006-10-15 发布日期:2006-10-15

Influence of the shape and size of disc swirl spinning conducting tube on the yarn quality

GE Ming-qiao;ZHUANG Jian-guo;LI Yong-gui;GU Wen-yan   

  1. The Key Laboratory of Ecological Textile;Ministry of Education;Southern Yangtze University;Wuxi;Jiangsu 214122;China
  • Received:2005-12-01 Revised:2006-02-28 Online:2006-10-15 Published:2006-10-15

摘要: 以旋流纺输送管道为研究对象,通过对输送管道的设计、试验与分析,阐明了输送管道的形状与尺寸对所加工纱线的断裂强度和抗剥离性的影响。结果显示,当输送管道下层面长度为43 mm,进口面高度为30 mm,输送管道出口面高度为24 mm,输送管道下层面和进口面的夹角为30°,输送管道出口面宽度为9 mm,输送管道上层面和进口面的夹角为148°,输送管道进口面宽度为22 mm时,所纺纱线的强度和抗剥离性较好。

Abstract: The conducting tube was studied with emphasis on the effect of the conducting tube′s shape and size on the breaking strength and anti-striping of the spun yarn through designing,experiments and analysis of the conducting tube.The results showed that the spun yarn has better strength and anti-striping property when the conducting tube undersurface′s length is 43 mm,the entrance′s heght is 30mm,the exit′s height is(24 mm,) the angle of the conducting tube undersurface and entrance side is 30°,the conducting tube exit′s width is 9 mm,the angle of the conducting tube upper side and entrance side is 148° and the conducting tube entrance′s width is 22 mm.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!