纺织学报 ›› 2007, Vol. 28 ›› Issue (12): 27-29.

• 纤维材料 • 上一篇    下一篇

等离子体引发丙烯酰胺接枝改性聚丙烯非织造布

唐丽华1;李鑫2;江渊2;王荣民1   

  1. 1.西北师范大学甘肃省高分子材料重点实验室 甘肃兰州730070;2.中国纺织科学研究院 北京100025
  • 收稿日期:2007-02-06 修回日期:2007-05-24 出版日期:2007-12-15 发布日期:2007-12-15

Grafting acrylamide onto PP nonwoven fabrics by plasma

TANG Lihua;LI Xin;JIANG Yuan;WANG Rongmin   

  1. 1.Key Laboratory of Polymer Materials of Gansu Province;Northwest Normal University;Lanzhou;Gansu 730070;China;2.China Textile Academy;Beijing 100025;China
  • Received:2007-02-06 Revised:2007-05-24 Online:2007-12-15 Published:2007-12-15

摘要: 采用常压等离子体设备,以空气为介质对聚丙烯(PP)熔喷非织造布进行处理,并在15%的丙烯酰胺水溶液中进行接枝聚合。表面衰减全反射红外光谱(ATR-FTIR)分析的结果表明,等离子体处理后,非织造布已接枝上聚丙烯酰胺(PAM)。经接枝改性的样品,亲水性得到持久提高,接触角由处理前的135°降低至110°,放置后接触角不变。未经接枝PAM的样品,放置后接触角回复至130°。扫描电镜观察的结果表明,等离子体处理对PP纤维产生明显的刻蚀,接枝后的PP纤维表面有突出物。

Abstract: Polypropylene(PP) melt-blown nonwoven fabric was treated by atmospheric-pressure air plasma,and subsequently the sample was grafted using acrylamide as monomer in 15% acrylamide water solution.Attenuated total reflection Fourier transform infrared spectroscopy(ATR-FTIR) confirmed the grafting of polyacrylamide(PAM) onto the surface of the nonwoven sample.Grafting with PAM made the plasma-treated sample durably hydrophilic,its contact angle decreased from 135°(original sample) to 110°and remained unchanged after storage,while the contact angle of untreated sample reverted to 130°.Scanning electron microscopy indicated that plasma treatment had significantly etched the surface of PP fiber and there were projections on the fiber of grafted-sample.

No related articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!