纺织学报 ›› 2015, Vol. 36 ›› Issue (06): 92-96.

• 服装工程 • 上一篇    下一篇

翻驳领松量及里外匀预测模型

  

  • 收稿日期:2014-06-04 修回日期:2014-08-13 出版日期:2015-06-15 发布日期:2015-06-17
  • 通讯作者: 李亚玲 E-mail:1025288144@qq.com

Predicting model of collar roll ease and width of face and back of lapel collar

  • Received:2014-06-04 Revised:2014-08-13 Online:2015-06-15 Published:2015-06-17

摘要:

为研究面料厚度对翻驳领松量及里外匀的影响规律,选取常用外衣面料试样,测试了面料黏合前后厚度,用切展法确定翻驳领松量,测得表领领外口松量、翻折线松量、表领绕到里领侧松量等里外匀参数指标,探讨了面料黏合厚度与翻驳领松量及各里外匀指标的相关关系,建立了预测翻驳领松量及里外匀的回归模型,并选择3块新试样对模型预测结果和实测结果进行了比较。结果表明,预测结果和实测结果基本一致,翻驳领松量及里外匀的回归模型具有良好的预测效果。

关键词: 面料厚度, 翻驳领, 翻领松量, 里外匀

Abstract:

The purpose of this paper is to find out the effect of fabric thickness on collar roll ease and differences between top and under of lapel collar. Commonly-used outwear fabrics were chosen to test the thickness of fabric with and without interlining. The lapel roll ease of under collar was tested with slash and spread method. The differences between top and under of lapel collar, including outer edge ease of top collar, roll line ease of top collar and the ease added to allow the outer edge of top collar hiding to the under collar, were tested. The relationship between fused fabric thickness and lapel roll ease, differences of top and under collar were discussed, and the predicting models were established. Moreover, three new fabrics were chosen to test the model by comparing the calculating result with the testing result, showing that the established model of collar roll ease and differences between top and under of lapel collar has good predicting effect since the result based on predicting model is basically coincide with the testing result. The research findings can provide the theoretical base for developing lapel collar patterns rapidly and accurately.

Key words: fabrics thickness, lapel collar, collar roll ease, width of face and back

[1] 李哲. 西装翻驳领倒伏量的确定方法[J]. 纺织学报, 2008, 29(7): 83-86.
[2] 杨晓敏;吴志明. 面料性能对翻驳领倒伏量变化规律的影响[J]. 纺织学报, 2007, 28(3): 84-87.
[3] 鲁虹;刘国联;戴宏钦. 翻领宽度对西装翻驳领倒伏量的影响[J]. 纺织学报, 2006, 27(8): 45-48.
[4] 尚笑梅. 影响服装驳面样板成型因素的研究[J]. 纺织学报, 2006, 27(4): 105-108.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 曹成生. 香港棉纺织工业的经历和趋向[J]. 纺织学报, 1982, 3(09): 60 -62 .
[2] 何瑶. 织物动态吸放湿规律的测试分析[J]. 纺织学报, 2004, 25(03): 37 -39 .
[3] 史途停;陈建勇. 入世后中国纺织业的发展趋势及对策[J]. 纺织学报, 2004, 25(02): 114 -115 .
[4] 周罗庆. 成圈机件对纱线作用的缺陷与改进[J]. 纺织学报, 2004, 25(03): 84 -86 .
[5] 陈海珍;沈红娟. 添加纳米氧化钛的聚酯纤维性能研究[J]. 纺织学报, 2004, 25(04): 14 -15 .
[6] 宗有久;郭吉如. 制浆工艺对粘胶制备的影响[J]. 纺织学报, 1987, 8(01): 46 -48 .
[7] 周鈜;施清;华芝妹. 光敏重氮树脂结构和性能的研究[J]. 纺织学报, 1987, 8(02): 5 -7 .
[8] 胡智文;傅雅琴;陈文兴. 化学镀镍涤纶抗静电纤维研究[J]. 纺织学报, 2000, 21(05): 45 -47 .
[9] 冯文斌. 细纱胶圈轴承张力架的介绍[J]. 纺织学报, 1986, 7(05): 21 .
[10] 汪云涛;鲍青山;王树国. 激光在服装裁剪中的应用[J]. 纺织学报, 1998, 19(05): 54 -56 .