熔喷非织造用聚(3-羟基丁酸-co-3-羟基戊酸共聚酯)/聚乳酸双组分生物降解材料的可纺性能

纺织学报 ›› 2016, Vol. 37 ›› Issue (2): 21-26.

熔喷非织造用聚(3-羟基丁酸-co-3-羟基戊酸共聚酯)/聚乳酸双组分生物降解材料的可纺性能

收稿日期:2015-09-29 修回日期:2015-11-10 出版日期:2016-02-15 发布日期:2016-02-22

Study on spinnability of biodegradable Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) / poly(lactic acid) blends for melt-blown nonwovens

Received:2015-09-29 Revised:2015-11-10 Online:2016-02-15 Published:2016-02-22

摘要/Abstract

摘要：

采用熔融共混法制备了质量比为100/0、75/25、50/50、25/75、0/100的熔喷非织造用PHBV/PLA共混材料，分别采用热重分析法（TG）、熔融指数法（MFI）、热台偏光镜法（POM）和毛细管流变法对共混材料的可纺性能进行了研究，并对其初生纤维的纺丝性能给予了初步评价。研究表明：PHBV的热稳定性差、加工窗口窄且熔体流动性差，PHBV/PLA共混材料的热稳定性和熔体流动性明显改善；PHBV结晶速率快, PLA对PHBV的结晶具有稀释作用；PHBV/PLA共混物为典型的切力变稀型流体，PHBV对温度和剪切速率变化敏感度高，PHBV/PLA共混材料的表观粘度随着PLA含量的提高而有所增大，但均小于纯PLA；PHBV纤维发粘现象严重，纺丝困难，随着共混材料中PLA含量的提高，纺丝性能提高，初生纤维表面变得光滑。

关键词: 聚（3-羟基丁酸-co-3-羟基戊酸共聚酯）, 聚乳酸, 可纺性能, 熔喷

Abstract:

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and Poly (lactic acid) (PLA) blends for melt-blown nonwovens were prepared with different ratios (100/0,75/25,50/50,25/75,0/100) by melt mixing. The thermal properties, melt flowing index, crystallization and rheological behavior of PHBV/PLA blends were investigated, and its as-spun fiber was also prepared to evaluate the spinnability of blends. The results showed that pure PHBV had poor thermal stability, narrow processing window and low melt flow rate, blended with PLA improved the thermal stability and melt fluidity of PHBV; pure PHBV also had fast crystallization rate with nucleating agent and PLA had a dilution effect on the crysyalizaion of PHBV; PHBV had high sensitivity to the temperature and shear rate changes, PHBV/PLA blends had mixing characteristic of shear thinned liquid and the apparent viscosity of blends increased with the increasing of PLA but was less than pure PLA; PHBV had poor spinnability with serious sticky situation and low drawing ratio of as-spun fiber, but it could be improved with the blending of PLA and the surface also became more smoother.

Key words: poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(lactic acid), spinnability, melt-blown

朱斐超韩建于斌余洁欧璐. 熔喷非织造用聚(3-羟基丁酸-co-3-羟基戊酸共聚酯)/聚乳酸双组分生物降解材料的可纺性能[J]. 纺织学报, 2016, 37(2): 21-26.

参考文献

相关文章 15

[1]	刘婷张安莹王锐董振峰朱志国王照颖. 季戊四醇磷酸酯/二乙基次磷酸锌协同阻燃聚酰胺6的制备及其性能 [J]. 纺织学报, 2018, 39(09): 8-14.
[2]	赵作显洪剑寒严喆潘志娟. 生物可降解聚（3-羟基丁酸-co-3-羟基戊酸共聚酯）/聚乳酸共混物的相容性和结晶性[J]. 纺织学报, 2018, 39(08): 1-8.
[3]	金关秀张毅楼永平祝成炎. 应用粗糙集和支持向量机的熔喷非织造布过滤性能预测[J]. 纺织学报, 2018, 39(06): 142-148.
[4]	程燕婷孟家光支超. 以柔性聚乳酸为材料的织物组织立体打印参数设计[J]. 纺织学报, 2018, 39(05): 38-42.
[5]	蔡冯杰祝成炎田伟吕智宁申晓. 3D打印成型的玻璃纤维增强聚乳酸基复合材料[J]. 纺织学报, 2017, 38(10): 13-18.
[6]	魏发云张伟邹学书何洋张瑜. 等离子体诱导丙烯酸接枝改性聚丙烯熔喷非织造材料[J]. 纺织学报, 2017, 38(09): 109-114.
[7]	王利君熊杰骆菁菁赵兴艳赵新飞. 聚乳酸-聚己内酯/丝素蛋白三元复合纳米纤维膜支架的结构与性能[J]. 纺织学报, 2017, 38(05): 8-13.
[8]	谢胜韩万里. 熔喷过程中纤维直径再次变大的模拟与验证[J]. 纺织学报, 2017, 38(04): 17-21.
[9]	李旭明孙西超师利芬. 增强增韧聚乳酸纤维的制备及其性能[J]. 纺织学报, 2017, 38(04): 12-16.
[10]	杨明杰武海良沈艳琴姚一军毛宁涛. 中低温条件下聚乳酸长丝的上浆机制[J]. 纺织学报, 2017, 38(03): 85-90.
[11]	王晓梅陈才深. 聚乳酸/聚丙烯共混纺粘纤维的制备及其性能[J]. 纺织学报, 2017, 38(01): 13-16.
[12]	姚鹏成夏鑫. 聚乳酸包覆相变材料复合织物的制备及其性能[J]. 纺织学报, 2017, 38(01): 67-72.
[13]	戈欢朱志国王锐尹会会王睿张秀芹. 不同分子质量聚乳酸立体复合物的结晶性能及球晶形貌[J]. 纺织学报, 2016, 37(2): 27-34.
[14]	陈美玉来侃孙润军陈立成王玉. 大麻/聚乳酸复合发泡材料的力学性能[J]. 纺织学报, 2016, 37(01): 28-34.
[15]	韩啟明何建新谭卫琳余志才邵伟力. 柞蚕丝素/聚乳酸纳米纤维纱的制备及其生物学性能[J]. 纺织学报, 2015, 36(12): 1-6.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed