纺织学报 ›› 2019, Vol. 40 ›› Issue (07): 44-50.doi: 10.13475/j.fzxb.20180608307

• 纺织工程 • 上一篇    下一篇

横编全成形袜子工艺设计与编织原理

王盼, 吴志明()   

  1. 江南大学 教育部针织技术工程研究中心, 江苏 无锡 214122
  • 收稿日期:2018-06-29 修回日期:2019-04-08 出版日期:2019-07-15 发布日期:2019-07-25
  • 通讯作者: 吴志明
  • 作者简介:王盼(1991-),女,硕士生。主要研究方向为全成形产品编织工艺。
  • 基金资助:
    国家自然科学基金项目(61772238);国家轻工技术与工程一流学科自主课题资助项目(2018-28)

Process design and knitting principle of whole socks on flat knitting machine

WANG Pan, WU Zhiming()   

  1. Engineering Research Center for Knitting Technology, Ministry of Education, Jiangnan University, Wuxi, Jiangsu 214122, China
  • Received:2018-06-29 Revised:2019-04-08 Online:2019-07-15 Published:2019-07-25
  • Contact: WU Zhiming

摘要:

针对传统袜子下机需套口缝合、生产成本高的问题,采用双针床电脑横机及SDS-ONE APPEX3设计系统,从花型设计、工艺参数以及编织工艺3方面对全成形袜子进行研究。根据袜头成形结构不同,提出普通包趾袜、五趾袜、内五趾袜的全成形袜子分类方法,分别探讨了全成形袜子各部段的编织工艺,其中对3种袜头编织工艺进行重点探讨。研究表明:袜头采用局部编织工艺实现圆弧状和内五指袜趾间隔片编织;在袜脚、袜筒编织过程,通过收放针工艺实现圆筒的横向尺寸变化;袜跟在引返编织同时进行收放针,以形成梯形袋状结构;袜口采用罗纹组织并插入弹性纱以防穿着时下滑,并采用平收工艺对袜口进行最后处理。

关键词: 横编, 全成形袜子, 工艺设计, 编织原理

Abstract:

In order to solve artificial sewing and high production costs required by conventional socks, the V-bed computerized flat knitting machine and SDS-ONE APPEX3 design system was adopted to study the whole socks from pattern design, process parameters and knitting process. According to the sox head structure, the whole socks in common socks, toe socks and inner toe socks were proposed. The knitting technology of every part of whole socks was discussed. Three kinds of sox head knitting technology were discussed emphatically. It is found that sox head adopts partial technology to realize the circular shape and spacer knitting of inner toe socks. During the knitting process of sox foot and tube, the horizontal dimension change of the cylinder can be realized by the narrowing and widening process. The sox heel forms a trapezoidal bag structure by partial technology and narrowing and widening process. The sox mouth adopts a rib structure and inserts elastic yarn to prevent slipping when wearing. The final treatment of sox mouth adopts a press-off process.

Key words: flat knitting, whole socks, process design, knitting principle

中图分类号: 

  • TS941.3

图1

编织机部件"

图2

翻针动作"

图3

袜子种类"

图4

花型设计流程"

表1

面压设定参数表"

编织宽度/
cm
面压值/(N·cm-2)
SWG061N2 SWG091N2
60 10 4~5
40 7~9 3~4
30 7~9 1~2
20 1 1
10 1 1
<10 1 1

图5

普通包趾袜袜头编织"

图6

普通胯五趾袜袜头编织"

图7

立体胯五趾袜袜头编织"

图8

内五趾袜袜头编织"

图9

袜脚编织工艺"

图10

袜跟编织"

图11

袜口编织"

[1] 彭佳佳, 蒋高明, 卢致文 , 等. 全成形毛衫在双针床电脑横机上的编织工艺[J]. 纺织学报, 2015,36(11):53-54.
PENG Jiajia, JIANG Gaoming, LU Zhiwen , et al. Technical study of whole garment on V-bed computerized flat knitting machine[J]. Journal of Textile Research, 2015,36(11):53-54.
[2] 杨卫平 . 全成形毛衫的结构与编织工艺研究[D]. 上海:东华大学, 2016: 22-29.
YANG Weiping . Investigation on structure and knitting technology of fully fashioned sweater[D]. Shanghai:Donghua University, 2016: 22-29.
[3] 祝细 . 电脑横机织可穿针织服装的编织工艺及其性能研究[D]. 天津:天津工业大学, 2011: 5-6.
ZHU Xi . Research of the knitting process and performance for knit & wear clothes on the domestic computerized flat knitting[D]. Tianjin: Tianjin Polytechnic University, 2011: 5-6.
[4] 蒋家松, 李义有 . 五趾有跟电脑提花袜的生产技术[J]. 针织工业, 2008(8):7-8.
JIANG Jiasong, LI Yiyou . Production technology of five-toe computerized jacquard socks with heels[J]. Knitting Industries, 2008(8):7-8.
[5] 张卫红, 郭振华 . 电脑提花袜的设计原理与方法[J]. 纺织导报, 2011(9):117-119.
ZHANG Weihong, GUO Zhenhua . Design principles and methods of computerized jacquard socks[J]. China Textile Leader, 2011(9):117-119.
[6] 朱文俊, 郑建林 . 电脑横机编织技术[M]. 北京: 中国纺织出版社, 2011: 327-329.
ZHU Wenjun, ZHENG Jianlin. Knitting Technology of Computerized Flat Knitting Machine[M]. Beijing: China Textile & Apparel Press, 2011: 327-329.
[7] 龙海如 . 针织学[M]. 北京: 中国纺织出版社, 2011: 121-135.
LONG Hairu. Knitting Technology[M]. Beijing: China Textile & Apparel Press, 2011: 121-135.
[8] 涂建雯, 李敏 . 功能性袜品开发现状及发展趋势[J]. 针织工业, 2011(4):22-24.
TU Jianwen, LI Min . Development status and development trend of functional socks[J]. Knitting Industries, 2011(4):22-24.
[9] 彭佳佳, 蒋高明, 丛洪莲 , 等. 全成形毛衫的结构与编织原理[J]. 纺织学报, 2017,38(11):48-55.
PENG Jiajia, JIANG Gaoming, CONG Honglian , et al. Structure and knitting principle of whole garment[J]. Journal of Textile Research, 2017,38(11):48-55.
[10] 王敏 . 四针床电脑横机的全成形工艺[J]. 纺织学报, 2017,38(4):62-63.
WANG Min . Whole garment knitting process on four-bed computerized flat knitting machine[J]. Journal of Textile Research, 2017,38(4):62-63.
[1] 徐艳华, 袁新林. 段染纱横编袜子花纹形成方法[J]. 纺织学报, 2020, 41(10): 52-57.
[2] 李晓英 马丕波 聂小林 蒋高明. 曲面三维横编间隔织物复合材料的压缩性能[J]. 纺织学报, 2018, 39(01): 62-65.
[3] 彭佳佳 蒋高明 丛洪莲 王敏. 全成形毛衫的结构与编织原理[J]. 纺织学报, 2017, 38(11): 48-55.
[4] 袁新林 徐艳华. 段染纱横编织物花纹预测[J]. 纺织学报, 2017, 38(10): 44-48.
[5] 高梓越 丛洪莲 蒋高明 王薇 汤梦婷 于璐璐. 基于超文本标记语言5的横编计算机辅助设计系统[J]. 纺织学报, 2017, 38(10): 132-137.
[6] 卢致文 蒋高明. 基于纱线纹理的横编线圈快速仿真与计算机实现[J]. 纺织学报, 2016, 37(2): 119-124.
[7] 张恒 甄琪 王俊南 钱晓明 刘永胜. 梯度结构耐高温纤维过滤材料的结构与性能[J]. 纺织学报, 2016, 37(05): 17-22.
[8] 陶建勤 余晓华 张宏伟 刘娜. 毛纱捻缩率的预测模型[J]. 纺织学报, 2016, 37(05): 32-36.
[9] 万爱兰 丛洪莲 蒋高明 钟君 王敏 . 包芯色纱性能及其对横编成形提花鞋面织物的影响[J]. 纺织学报, 2015, 36(07): 36-42.
[10] 张玉红 陈绍芳. 应用母型法的无缝内衣工艺样板设计[J]. 纺织学报, 2015, 36(07): 100-103.
[11] 卢致文 蒋高明 丛洪莲 杨茜. 基于人体足部特征的鞋面样板设计及横编成形方法[J]. 纺织学报, 2015, 36(04): 65-70.
[12] 雷惠 丛洪莲 张爱军 蒋高明 万爱兰. 基于质点模型的横编织物结构研究与计算机模拟[J]. 纺织学报, 2015, 36(02): 43-48.
[13] 陈洁 秦晓 王建明. 局部管状横机织物的开发[J]. 纺织学报, 2013, 34(9): 39-0.
[14] 李毓陵;丁辛;胡良剑. 异形截面预制件编织的置换分析[J]. 纺织学报, 2007, 28(1): 51-55.
[15] 项前;吕志军;杨建国. 纺织品智能工艺设计与质量预测系统[J]. 纺织学报, 2005, 26(3): 118-120.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!