纺织学报 ›› 2012, Vol. 33 ›› Issue (10): 72-78.

• 染整与化学品 • 上一篇    下一篇

双端丙烯酰氧基聚醚硅油的制备及其改性聚丙烯酸酯性能

李强1,吴明华1,2,孙晓芳1,高笑飞1   

    1. 浙江理工大学先进纺织材料与制备技术教育部重点实验室
    2. 浙江理工大学生态染整技术教育部工程研究中心
  • 收稿日期:2011-11-09 修回日期:2012-05-07 出版日期:2012-10-15 发布日期:2012-10-17
  • 通讯作者: 吴明华 E-mail:wumh001@126.com

Synthesis of double terminated acryloyl-polyether silicon oil and property of its modified polyacrylate latex

  • Received:2011-11-09 Revised:2012-05-07 Online:2012-10-15 Published:2012-10-17

摘要: 采用丙烯酸和双端羟基聚醚硅油为原料,通过酯化反应制备了双端丙烯酰氧基聚醚硅油,研究了催化剂用量、反应温度和时间、溶剂和阻聚剂用量等因素对酯化率影响,用FTIR和1H-NMR对产物结构进行了表征;并将其应用于聚丙烯酸酯乳液制备,测定了改性乳液及其涂料印花性能。结果表明:酯化反应最佳条件为:催化剂和溶剂用量分别为反应物总质量的5%、70%,阻聚剂用量为丙烯酸质量的0.75%,反应温度为110℃,反应时间为4h;FTIR和1H-NMR谱图表明酯化产物结构为丙烯酰氧基聚醚改性硅油;改性乳液胶膜的疏水性变大,断裂强度略有下降,断裂延伸率明显变大,断裂功略有增加;改性乳液应用于涂料印花,印花织物干、湿摩可达4级及以上,手感柔软。

关键词: 聚丙烯酸酯, 酯化反应, 丙烯酰氧基聚醚硅油, 涂料印花

Abstract: A double terminated acryloyloxy-polyether silicon oil was prepared by esterification reaction with acrylic acid and polyether modified silicon oil terminated by double hydroxyl as raw materials. The influences of reaction factors such as amount of catalyst,reaction temperature and time,dosage of solvent and inhibitor on esterification rate were investigated,the structure of product was characterized by FTIR and 1H-NMR, double terminated acryloyloxy-polyether silicon oil was applied in the preparation of silicon-modified polyacrylate latex, and the properties of silicon-modified polyacrylate latex and its pigment printing were measured. The results showed that the optimal esterification condition was that the amounts of catalyst and solvent were 5% and 70% of total reactant mass respectively, the dosage of inhibitor were 0.75% of the amounts of acrylic acid, reaction temperature was 110℃ and reaction time was 4h. The analysis of FTIR and 1H-NMR indicated that the structure of esterification product was acryloyloxy-polyether silicon oil. Hydrophoblicity of the modified polyacrylate latex film was enhanced obviously, its breaking tenacity was decreased slightly, its breaking extension was increased significantly and its work of break was increased some, the dry and wet rubbing fastness of pigment printing fabric reached 4 grades and above, and its handle became softer.

Key words: polyacrylate latex, esterification reaction, acryloyloxy-polyether silicone oil, pigment printing

中图分类号: 

  • TQ316.33+4
[1] 娄佳慧 王锐 张文娟 董振峰 朱志国 张秀芹 刘继广. 有机钛-硅催化剂合成聚酯的动力学研究[J]. 纺织学报, 2018, 39(07): 1-7.
[2] 蒲泽佳 周向东. 聚丙烯酸酯改性硅溶胶的合成及其应用性能[J]. 纺织学报, 2017, 38(05): 86-92.
[3] 冯艳荣 袁剑民 王文力 李伟. 水性聚丙烯酸酯涂料染色黏合剂的合成及其性能[J]. 纺织学报, 2017, 38(04): 90-96.
[4] 杨帆 陈远辉 顾晨成 冒海燕 王潮霞 殷允杰. 紫外光固化水性聚氨酯丙烯酸酯黏合剂的印花性能[J]. 纺织学报, 2016, 37(3): 82-0.
[5] 樊武厚 黄玉华 韩丽娟 蒲宗耀 蒲实 胡于庆. 端羟乙基硅油的合成及其在硅丙乳液制备中应用[J]. 纺织学报, 2016, 37(2): 112-0.
[6] 刘明 薛袁 蔡银莲 朱益清 李梁斐 郑春玲. β-环糊精/聚丙烯酸酯纳米纤维膜的耐水性及其对重金属离子的捕集[J]. 纺织学报, 2016, 37(09): 1-5.
[7] 隋智慧 杨康乐 陈杰 赵欣. 含氟聚丙烯酸酯乳液整理剂的性能及其应用[J]. 纺织学报, 2016, 37(09): 100-105.
[8] 杨宏林 项伟 董淑秀. 铜颗粒增效湿摩擦牢度提升剂的性能及其应用[J]. 纺织学报, 2016, 37(07): 93-98.
[9] 张涛 杨帆 张开瑞 王潮霞. 羟基硅油改性水性聚氨酯涂料的制备及其印花性能[J]. 纺织学报, 2015, 36(11): 82-0.
[10] 高党鸽 冯军芳 段羲颖 马建中. 涂料印花用聚丙烯酸酯/纳米ZnO复合乳液的制备及其性能[J]. 纺织学报, 2015, 36(08): 78-83.
[11] 李月荣 周岚 冯新星 陈建勇 张建春. 纳米二氧化硅涂料印花雪地伪装织物的制备及性能表征[J]. 纺织学报, 2015, 36(06): 77-0.
[12] 李旭明. 基于等离子体与湿退浆的聚丙烯酸酯浆料去除[J]. 纺织学报, 2014, 35(1): 78-0.
[13] 黄玉华 罗艳辉 蒲宗耀 吴晋川 胡于庆. 涂料印花织物的耐摩擦色牢度评定[J]. 纺织学报, 2013, 34(7): 90-94.
[14] 孙晓芳 吴明华 孙段冰. 双端丙烯酰氧基丙基聚硅氧烷改性聚丙烯酸酯合成及性能[J]. 纺织学报, 2013, 34(12): 90-0.
[15] 项伟 杨宏林 陈光杰. 超柔软涂料印花工艺在纯棉织物上的应用[J]. 纺织学报, 2013, 34(10): 101-0.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!