浮纹型贾卡经编织物的结构分析与工艺设计

纺织学报 ›› 2016, Vol. 37 ›› Issue (01): 52-56.

浮纹型贾卡经编织物的结构分析与工艺设计

收稿日期:2015-01-06 修回日期:2015-09-22 出版日期:2016-01-15 发布日期:2016-01-14

Structural analysis and technical design of warp knitted broché fabric

Received:2015-01-06 Revised:2015-09-22 Online:2016-01-15 Published:2016-01-14

摘要/Abstract

摘要：

在实际生产过程中，由于单纱选择装置特殊的作用，使得浮纹类织物新工艺在开机时容易出现大面积断纱现象，为此，本文详细阐述了该类织物生产过程中起始横列编织易断纱的原因，提出使用浮纹起头工艺来解决断纱问题，并将浮纹起头工艺整合到贾卡控制系统之中，因而使得新工艺上机生产时，先启用浮纹起头工艺，为花型生产做好准备，再进行花型生产。研究结果表明，上述做法不仅保证了织造的顺利进行，同时还满足了生产要求的布面质量。文中还给出了浮纹起头工艺的设计原则，并用实例进行了说明。

关键词: 经编, 浮纹, 贾卡织物, 起头工艺, 断纱

Abstract:

In actual production process, due to the special action of a single yarn selection device, largearea yarn breaking easily occurs in novel process of warp knitted borché fabrics while in startup, hence, the reason why yarns are easily broken during starting-up course weaving is introduced in detail, and an effective solution is proposed by using borché preparation process to nake preparation for the pattern production. Specifically, before the new warp knitted machine works, the prepared technical pattern is firstly preformed, and then pattern production is performed, and the broche preparation process is integrated in the Jacquard controller device. The results show that this solution can not only ensure the smooth operation of weaving, and can meet the fabric face quality required by the production. The design principle of the broche preparation process is proposed, and illustrated by examples.

Key words: warp knitting, borché, Jacquard fabric, preparation process, yarn-broken

中图分类号:

TS 181.8

王敏丛洪莲焦洋. 浮纹型贾卡经编织物的结构分析与工艺设计[J]. 纺织学报, 2016, 37(01): 52-56.

参考文献

相关文章 15

[1]	汤梦婷蒋高明王薇高梓越. 基于互联网的经编针织物CAD系统开发与实现[J]. 纺织学报, 2018, 39(10): 143-148.
[2]	苏柳元孟婥张玉井赵义满. 经编机梳栉横移系统误差建模与仿真[J]. 纺织学报, 2018, 39(08): 130-137.
[3]	张艳贺克杰李欣欣蒋高明. 多梳拉舍尔花边的多层次设计[J]. 纺织学报, 2018, 39(07): 44-49.
[4]	王雯雯高畅刘基宏. 应用卷积神经网络的细纱断纱锭位识别[J]. 纺织学报, 2018, 39(06): 136-141.
[5]	徐丽玉董智佳丛洪莲刘海桑. 经编全成形室内健身服的尺寸预测[J]. 纺织学报, 2018, 39(04): 100-105.
[6]	张灵婕缪旭红万爱兰蒋高明陈方芳. 上浆前处理剂对经编用棉纱性能的影响[J]. 纺织学报, 2018, 39(04): 82-86.
[7]	常玉萍马丕波. 负泊松比经编间隔织物的准静态拉伸性能[J]. 纺织学报, 2018, 39(04): 47-53.
[8]	董智佳蒋高明丛洪莲张爱军. 经编全成型运动装款式建模与工艺实现[J]. 纺织学报, 2018, 39(02): 38-42.
[9]	冯勇蒋高明吴志明徐存东. 基于物联网的经编制造执行系统关键技术[J]. 纺织学报, 2018, 39(02): 144-149.
[10]	郑静夏风林刘浪. 基于Simulink的经编机电子横移系统仿真[J]. 纺织学报, 2018, 39(02): 150-156.
[11]	胡瑜刘行缪旭红. 经编纱线动态张力评价指标[J]. 纺织学报, 2018, 39(02): 68-72.
[12]	高哲蒋高明. 多轴向经编曲面复合材料汽车门低速碰撞数值模拟[J]. 纺织学报, 2018, 39(02): 43-48.
[13]	张爱军蒋高明李欣欣丛洪莲. 基于分形噪声和几何着色器的经编毛绒织物仿真[J]. 纺织学报, 2018, 39(02): 171-176.
[14]	张舒缪旭红 RAJI Rafiu King 孙婉. 经编导电针织物的应变—电阻传感性能[J]. 纺织学报, 2018, 39(02): 73-77.
[15]	谢远鹏蒋高明张爱军张燕婷陈方芳. 双色效应压纱贾卡提花织物的计算机辅助设计[J]. 纺织学报, 2017, 38(12): 157-161.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed