纺织学报 ›› 2017, Vol. 38 ›› Issue (05): 53-57.doi: 10.13475/j.fzxb.20160606505

• 纺织工程 • 上一篇    下一篇

外衣用棉经编织物结构设计与生产工艺

  

  • 收稿日期:2016-06-23 修回日期:2017-02-07 出版日期:2017-05-15 发布日期:2017-05-16

Design and production method of cotton warp outerwear knitted fabrics

  • Received:2016-06-23 Revised:2017-02-07 Online:2017-05-15 Published:2017-05-16

摘要:

利用棉纱和经编技术的特性,针对棉纱的断裂强力和毛羽难以满足经编用纱要求的问题,提出了棉纱在经编中应用的关键技术;给出了从纺纱方法、整经及织造工艺过程中尝试采用的解决措施,选用集聚纺棉纱,在整经时加白油使棉纱毛羽贴伏以减小与成圈机件的摩擦,在分纱筘上将棉纱分为2 层以减少纱线间摩擦,降低表观毛羽间的纠缠,最后从经编结构和工艺设计角度出发开发了2 款棉经编外衣面料,利用棉纱作衬纬组织与前梳纱线形成闪避效应获得一面棉一面涤的双面效应,棉纱作成圈组织配合空穿形成斜纹效应。

关键词: 棉纱, 经编, 结构设计, 闪避垫纱, 双面效应, 斜纹

Abstract:

On the basis of cotton yarn and warp knitting, aiming at the problem that the mechanical properties such as cotton yaarn strength yarn strength at break and hairs were difficult to meet with the technical requirements of warp knitting, the solution to solve the technical problems of cotton yarns in warp knitting at high speed were proposed. It presented the key technologies of cotton yarns used in the warp knitting and provided the technical solutions among yarn spinning method, beaming and knitting processes. The compact yarns were selected, and the white oil was added when beaming-warping that can make the yarn hairs lodging to decrease the friction between the yarn and the loop formation elements. The cotton yarns were divided into two layers which could cut down the hairs' tangling. Finally, two warp knitted outwear products using cotton yarns were developed from the perspective of the warp structure and process design. The two-sided effect is obtained with cotton yarn as the partial weft insertion. The reason is that the front knitting guide bar and the back laying-in guide bar with cotton yarn underlap in the same direction,and the inlay evaded the knitting bar underlaps and slipped through onto the technical back of the structure. Warp twill is designed with cotton yarn as looping structure, whose guide bar is part-threaded.

Key words: cotton yarn, warp knitting, structure design, evasive yarn laying, two-sided effect, twill

[1] 苏柳元 孟婥 张玉井 赵义满. 经编机梳栉横移系统误差建模与仿真[J]. 纺织学报, 2018, 39(08): 130-137.
[2] 张艳 贺克杰 李欣欣 蒋高明. 多梳拉舍尔花边的多层次设计[J]. 纺织学报, 2018, 39(07): 44-49.
[3] 刘春 谢春萍 苏旭中 刘新金. 假捻器在环锭细纱机上的应用效果及工艺优化[J]. 纺织学报, 2018, 39(07): 27-31.
[4] 张希文 武海良 沈艳琴 毛宁涛. 温湿度对涤/棉浆纱力学性能的影响[J]. 纺织学报, 2018, 39(06): 70-74.
[5] 徐丽玉 董智佳 丛洪莲 刘海桑. 经编全成形室内健身服的尺寸预测[J]. 纺织学报, 2018, 39(04): 100-105.
[6] 张灵婕 缪旭红 万爱兰 蒋高明 陈方芳. 上浆前处理剂对经编用棉纱性能的影响[J]. 纺织学报, 2018, 39(04): 82-86.
[7] 常玉萍 马丕波. 负泊松比经编间隔织物的准静态拉伸性能[J]. 纺织学报, 2018, 39(04): 47-53.
[8] 刘杰 王府梅. 单向导湿机织物结构设计[J]. 纺织学报, 2018, 39(03): 50-55.
[9] 胡瑜 刘行 缪旭红. 经编纱线动态张力评价指标[J]. 纺织学报, 2018, 39(02): 68-72.
[10] 高哲 蒋高明. 多轴向经编曲面复合材料汽车门低速碰撞数值模拟[J]. 纺织学报, 2018, 39(02): 43-48.
[11] 张爱军 蒋高明 李欣欣 丛洪莲. 基于分形噪声和几何着色器的经编毛绒织物仿真[J]. 纺织学报, 2018, 39(02): 171-176.
[12] 董智佳 蒋高明 丛洪莲 张爱军. 经编全成型运动装款式建模与工艺实现[J]. 纺织学报, 2018, 39(02): 38-42.
[13] 冯勇 蒋高明 吴志明 徐存东. 基于物联网的经编制造执行系统关键技术[J]. 纺织学报, 2018, 39(02): 144-149.
[14] 郑静 夏风林 刘浪. 基于Simulink的经编机电子横移系统仿真[J]. 纺织学报, 2018, 39(02): 150-156.
[15] 张舒 缪旭红 RAJI Rafiu King 孙婉. 经编导电针织物的应变—电阻传感性能[J]. 纺织学报, 2018, 39(02): 73-77.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!