Journal of Textile Research ›› 2019, Vol. 40 ›› Issue (12): 21-26.doi: 10.13475/j.fzxb.20181202806

• Fiber Materials • Previous Articles     Next Articles

Theoretical model for number of fiber contacts in fibrous porous materials

BAI He1,2, QIAN Xiaoming1(), FAN Jintu1,3, QIAN Yao1, LIU Yongsheng1, WANG Xiaobo1   

  1. 1. School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China
    2. College of Physics and Materials Science, Tianjin Normal University, Tianjin 300387, China
    3. Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hong Kong 999077, China
  • Received:2018-12-12 Revised:2019-05-25 Online:2019-12-15 Published:2019-12-18
  • Contact: QIAN Xiaoming E-mail:qxm@tjpu.edu.cn

RichHTML

6

PDF (PC)

137

Abstract:

In order to study the microstructure of fibrous porous materials, the theoretical values of the number of contact points among fibers in three-dimensional and two-dimensional distribution of fibers in space were studied by establishing a theoretical model of the number of fiber contacts. According to the characteristics of Poisson distribution and combining with the research conclusions of Sampson et al, the functional relationships of the number of contact points among fibers, the diameter of fibers and the porosity were established. Geo-Dict software was adopted to simulate the fiber structure, and the number of fiber contacts was calculated. The theoretical predictions were compared with the results of previous studies. The results show that when the aspect ratio of fibers is constant, the number of fibers is proportional to the number of fiber contacts. When the porosity is constant, the diameter of fibers is inversely proportional to the number of fiber contacts. When the diameter of fibers is fixed, the number of fiber contact decreases with the increase of the porosity, and when the diameter of fibers is greater than 40 μm, the number of contacts does not change with the porosity.

Key words: porous material, microstructure, fiber orientation, distribution function, number of fiber contact, theoretical model

CLC Number: 

  • TQ342.3

Fig.1

Cartesian coordinate system and a fiber in system"

Fig.2

Parallel hexahedron formed by alternating sliding of fiber A and fiber B"

Fig.3

Structure of fiber contact"

Fig.4

Three-dimensional random distribution fiber structure simulation"

Fig.5

Relationship between number of fibers and fiber to fiber contact"

Fig.6

Simulation of randomly distributed fiber structure in X-Y plane"

Fig.7

Relationship between with number of fibers and fiber to fiber contact(X-Y plane)"

Fig.8

Relationship between with fiber diameter and fiber to fiber contact in different porosity"

[1] BAGHERZADEH R, LATIFI M, NAJAR S S, et al. Experimental verification of theoretical prediction of fiber to fiber contacts in electrospun multilayer nano-microfibrous assemblies: effect of fiber diameter and network porosity[J]. Journal of Industrial Textiles, 2014,107(1):9-16.
[2] NAKAMURA K, SUDA T, MATSUMOTO K. Characterization of pore size distribution of non-woven fibrous filter by inscribed sphere within 3D filter model[J]. Separation and Purification Technology, 2018,197:289-294.
[3] GONG J, RUTLAND C J. PDF-based heterogeneous multiscale filtration model[J]. Environmental Science & Technology, 2015,49(8):4963-4970.
pmid: 25822651
[4] LI Wei, SHEN Shengnan, LI Hui. Study and optimization of the filtration performance of multi-fiber filter[J]. Advanced Powder Technology, 2016,27(2):638-645.
[5] WANG K, ZHAO H. The influence of fiber geometry and orientation angle on filtration performance[J]. Aerosol Science and Technology, 2015,49(2):75-85.
doi: 10.1080/02786826.2014.1003278
[6] PIEKAAR H W, CLARENBURG L A. Aerosol filters: the tortuosity factor in fibrous filters[J]. Chemical Engineering Science, 1967,22(12):1817-1827.
[7] DODSON C T J, SAMPSON W W. Modeling a class of stochastic porous media[J]. Applied Mathematics Letters, 1997,10(2):87-89.
[8] SAMPSON W W. A model for fibre contact in planar random fibre networks[J]. Journal of Materials Science, 2004,39(8):2775-2781.
[9] KOMORI T, ITOH M. Number of fiber to fiber contacts in general fiber assemblies[J]. Textile Research Journal, 1977,47(1):13-17.
[10] PAN N. Analytical characterization of the anisotropy and local heterogeneity of short fiber composites: fiber fraction as a variable[J]. Journal of Composite Materials, 1994,28(16):1500-1531.
[11] EMERSON M J, JESPERSEN K M, DAHL A B, et al. Individual fibre segmentation from 3D X-ray computed tomography for characterising the fibre orientation in unidirectional composite materials[J]. Composites Part A: Applied Science and Manufacturing, 2017,97:83-92.
[12] KANG S, LEE H, KIM S C, et al. Modeling of fibrous filter media for ultrafine particle filtration[J]. Separation and Purification Technology, 2019,209:461-469.
[13] HUANG X, HE Y, ZHOU W, et al. Pore network modeling of fibrous porous media of uniform and gradient porosity[J]. Powder Technology, 2019,343:350-361.
[14] GONG J, STEWART M L, ZELENYUK A, et al. Importance of filter's microstructure in dynamic filtration modeling of gasoline particulate filters(GPFs): inhomogeneous porosity and pore size distribution[J]. Chemical Engineering Journal, 2018,338:15-26.
[15] WYK V C M. 20—Note on the compressibility of wool[J]. Journal of The Textile Institute Transactions, 1946,37(12):285-292.
[16] BERBERI P. A new unified method for measurement of electrical resistivity of textile assemblies[C]// Proceedings ESA Annual Meeting. [S.l.], 1999: 23-25.
[17] SEBESYTEN E, HICKIE T S. The effect of certain fibre parameters on the compressibility of wool[J]. Journal of The Textile Institute, 1971,62(10):545-560.
[18] 于伟东. 纺织材料的形及其重要作用与结果[J]. 纺织学报, 2013,34(2):1-12.
YU Weidong. Shape of fibrous materials:its significant effects and findings[J]. Journal of Textile Research, 2013,34(2):1-12.
[19] BAGHERZADEH R, NAJAR S S, LATIFI M, et al. A theoretical analysis and prediction of pore size and pore size distribution in electrospun multilayer nanofibrous materials[J]. Journal of Biomedical Materials Research: Part A, 2013,101(7):2107-2117.
[20] SAMPSON W W. A multiplanar model for the pore radius distribution in isotropic near-planar stochastic fibre networks[J]. Journal of Materials Science, 2003,38(8):1617-1622.
[21] KUWABARA S. The forces experienced by ramdomly distributed parallel circular cylinders of spheres in Viscous flow at small reynolds numbers[J]. Journal of the Physical Society of Japan, 2007,14(4):527-532.
[22] KALLMES O, CORTE H. The structure of paper: I: the statistical geometry of an ideal two dimensional fiber network[J]. TAPPI Journal, 1960,43(9):737-752.
[1] ZHANG Jiahui, WANG Jianping. Electric conduction and resistance theory model of circular weft knitted electrodes [J]. Journal of Textile Research, 2020, 41(03): 56-61.
[2] XIAO Qi, WANG Rui, SUN Hongyu, FANG Shu, LI Danyang. Research progress on theoretical models of mechanisms of fuzzing and pilling [J]. Journal of Textile Research, 2020, 41(02): 172-178.
[3] XIAO Yuan, YIN Bo, LI Lanxin, LIU Huanhuan. Influence of process conditions on silver conductive lines by micro-droplet jet printing solution reaction [J]. Journal of Textile Research, 2019, 40(05): 78-83.
[4] . High-performance polyimide fiber and its weavability [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(05): 14-19.
[5] . Simulation analysis of woven fabric electromagnetic shielding effectiveness using finite integration technique [J]. Journal of Textile Research, 2016, 37(2): 155-160.
[6] . Structure and physical properties of willow fibers [J]. Journal of Textile Research, 2016, 37(01): 23-27.
[7] . Study on propreties of regenerated cattle skin collagen fiber [J]. Journal of Textile Research, 2015, 36(04): 1-6.
[8] He-Chun CHEN. Shear deformation of annular shaped woven fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(4): 53-56.
[9] Chun Kui Jin. Use of Fourier transform in measurement of nano-fiber orientation [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(11): 34-0.
[10] Cailan Li. Application of image fusion technology in nonwovens’ fiber orientation [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(10): 26-0.
[11] . Microstructure and properties of radar absorbing iron fibers [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(1): 16-19.
[12] XU Anchang;ZHANG Lu;PAN Zhijuan. Effect of ethanol vapor treatment on properties of electrospun MWNTs/silk fibroin/polyamine 6/66 fibers [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(7): 1-5.
[13] XU Anchang;ZHANG Min;PAN Zhijuan. Structure and property of electrospun MWNTs/silk fibroin nanofiber mats [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(6): 1-6.
[14] Liu Yang;xu anchang;CHENG Qian;PAN Zhijuan. Effect of electrospinning process on structure and property of electrospun PA6/MWNTs yarn [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(3): 1-6.
[15] ZHOU Weitao;HE Jianxin;DU Shan;CUI Shizhong;GAO Weidong. Preparation and characterization of silk fibroin/cellulose acetate blend fiber felt [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(11): 16-19.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd