Journal of Textile Research ›› 2020, Vol. 41 ›› Issue (02): 136-142.doi: 10.13475/j.fzxb.20190102907

• Machinery & Accessories • Previous Articles     Next Articles

Vibration model of elastically-supported axially moving guide bar

SU Liuyuan1, MENG Zhuo1(), WNAG Yacheng1, GE Xiaoyi2, ZHANG Yujing1   

  1. 1. College of Mechanical Engineering, Donghua University, Shanghai 201620, China
    2. Yili Intelligent Technology Co., Ltd., Putian, Fujian 351146, China
  • Received:2019-01-14 Revised:2019-10-09 Online:2020-02-15 Published:2020-02-21
  • Contact: MENG Zhuo E-mail:mz@dhu.edu.cn

RichHTML

6

PDF (PC)

46

Abstract:

Aiming at the friction problem between guide needle and latch needle caused by the bending vibration of guide bars in a warp knitting machine, the vibration model of the thread guide bar was established from static and dynamic perspectives based on the continuous beam theory. The vibration equation of the guide bar was obtained by energy method, and the characteristics equation and mode function were built based on the boundary conditions and continuity conditions. In the case of static loading, the effects of materials and support stiffness on the frequencies and mode shapes were investigated. When the dynamical loading was considered, the effects of axial velocity, acceleration, and the transverse time on the natural frequencies were evaluated. The study shows that the influences of the materials and support stiffness are significant, while the influences of the velocity, acceleration, and transverse time are small, which provide reference for reducing the bending vibration of guide bar and optimizing the guide bar shogging system in the warp knitting machine.

Key words: multi-elastically-supported, axially-moving, guide bar, vibration model, continuous beam

CLC Number: 

  • TH113.1

Fig.1

Structural schematic diagram of guide bar shogging system"

Fig.2

Elastically-supported beam"

Tab.1

First natural frequency of guide bar with different materials"

梳栉材料 密度/
(kg·m-3)		 弹性模量/
GPa		 第一阶固有
频率/Hz
铝合金 2 730 69 113.83
镁铝合金 1 800 45 113.23
碳纤维复合材料 1 950 210~300 234.75~280.40

Tab.2

First three natural frequencies with different supports stiffness"

固有频
率/Hz		 支承刚度Kk/(kN·m-1)
2 000 4 000 8 000 20 000 100 000
第一阶 110.18 112.51 113.28 113.66 113.84
第二阶 126.14 131.38 133.72 135.06 135.76
第三阶 130.58 143.38 150.72 155.25 157.67

Fig.3

First three mode shapes of guide bar with different support stiffness"

Fig.4

Model of elastically supported axially moving beam"

Fig.5

1st natural frequency vs axial velocity"

Fig.6

1st natural frequency vs axial acceleration"

Fig.7

Constant-acceleration and constant-deceleration motion mode of guide bar"

Fig.8

1st natural frequency vs translation time"

[1] YESILCE Y, DEMIRDAG O, CATAL S. Free vibrations of a multi-span Timoshenko beam carrying multiple spring-mass systems[J]. Sadhana, 2008,33(4):385.
[2] 叶茂, 谭平, 任珉, 等. 中间带弹性支承各种边界条件连续梁模态分析[J]. 工程力学, 2010,27(9):80-85.
YE Mao, TAN Ping, REN Min, et al. Modal analysis of multi-span beams with intermediate flexible constraints and different boundary conditions[J]. Engineering Mechanics, 2010,27(9):80-85.
[3] JOHANSSON C, PACOSTE C, KAROUMI R. Closed-form solution for the mode superposition analysis of the vibration in multi-span beam bridges caused by concentrated moving loads[J]. Computers & Structures, 2013,119:85-94
[4] 刘向尧, 聂宏, 魏小辉. 复杂边界条件下的多跨梁的振动模型[J]. 北京航空航天大学学报, 2015,41(5):841-846.
LIU Xiangyao, NIE Hong, WEI Xiaohui. Vibration model for multi-span beam with arbitrary complex boundary conditions[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015,41(5):841-846.
[5] YANG T, FANG B, YANG X D, et al. Closed-form approximate solution for natural frequency of axially moving beams[J]. International Journal of Mechanical Sciences, 2013,74(13):154-160.
[6] LV H, LI Y, LI L, et al. Transverse vibration of viscoelastic sandwich beam with time-dependent axial tension and axially varying moving velocity[J]. Applied Mathematical Modelling, 2014,38(9/10):2558-2585.
[7] PARK S, CHUNG J. Dynamic analysis of an axially moving finite-length beam with intermediate spring supports[J]. Journal of Sound & Vibration, 2014,333(24):6742-6759.
[8] LIU X, NIE H, WEI X. Vibration model for multi-span beam with arbitrary complex boundary condi-tions[J]. Journal of Beijing University of Aeronautics & Astronautics, 2015,41(5):841-846.
[9] TANG Y Q, CHEN L Q, YANG X D. Natural frequencies, modes and critical speeds of axially moving Timoshenko beams with different boundary condi-tions[J]. International Journal of Mechanical Sciences, 2008,50(10/11):1448-1458.
[10] LEE U, OH H. Dynamics of an axially moving viscoelastic beam subject to axial tension[J]. International Journal of Solids & Structures, 2005,42(8):2381-2398.
[11] 苏柳元, 孟婥, 张玉井, 等. 经编机梳栉横移系统误差建模与仿真[J]. 纺织学报, 2018,39(8):139-142.
SU Liuyuan, MENG Zhuo, ZHANG Yujing, et al. Modeling and simulation of teansverse motion error of guide bar shogging system of warp knitting machine[J]. Journal of Textile Research, 2018,39(8):139-142.
[1] LIU Haisang, JIANG Gaoming, DONG Zhijia. Simulation and virtual display for few-guide bar yarn dyed fabric based Web [J]. Journal of Textile Research, 2021, 42(02): 87-92.
[2] . Modeling and simulation of transverse motion error of guide bar shogging system of warp knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 130-137.
[3] . The Key Technology of Developing Warp Knitting Machine with Multi-guide Bars [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(11): 139-0.
[4] . Analysis of shogging motion of guide bars on warp knitting machines [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(7): 121-125.
[5] LIU Xin, HU Xu-Dong, CHEN Hong-Li. Dynamic analysis of warp knitting swing machine guide bar swing mechanism based on flexible multi-body system [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(6): 92-96.
[6] ZHENG Bao-Ping, JIANG Gao-Ming, XIA Feng-Lin, ZHANG Qi, QIN Wen. Design of electronic shogging system based on double PID control on warp knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(5): 135-139.
[7] . Dynamic analysis od shogging motion mechanism of guide bar on warp knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(11): 121-126.
[8] . Design of electronic shogging system of warp knitting based on torque control mode [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(10): 122-127.
[9] ZHOU Suolin. Installation innovation of guide bar on spinning frame [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(1): 124-128.
[10] XIA Fenglin;GE Mingqiao;JIANG Gaoming. Optimizing design of shogging motion of the guide bar on high speed warp knitting machine [J]. JOURNAL OF TEXTILE RESEARCH, 2009, 30(05): 118-121.
[11] ZHANG Wei;WANG Xunming;ZHU Yongren. Analyzing transmission shaft dynamic character of jacquard machine by using transfer matrix method [J]. JOURNAL OF TEXTILE RESEARCH, 2007, 28(9): 107-109.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd