Journal of Textile Research ›› 2020, Vol. 41 ›› Issue (09): 76-80.doi: 10.13475/j.fzxb.20191000205

• Textile Engineering • Previous Articles     Next Articles

Sleeve-body connection technique for segmentation design of whole-garment flat-sleeve sweaters

CHEN Xi, MIAO Xuhong(), NIU Li, HAN Xiaoxue, JIANG Gaoming   

  1. Engineering Research Center for Knitting Technology, Ministry of Education, Jiangnan University,Wuxi, Jiangsu 214122, China
  • Received:2019-10-08 Revised:2020-04-25 Online:2020-09-15 Published:2020-09-25
  • Contact: MIAO Xuhong E-mail:miaoxuhong@163.com

RichHTML

3

PDF (PC)

43

Abstract:

In order to develop whole-garment sweaters that meet the market demand by using the four-needle-bed flat knitting machine, this paper describes a segmental design method for sleeve-body connection taking the flat-sleeve sweater as an example. The process of whole-garment flat-sleeve sweater at the joint of sleeve and body was divided into three parts: sleeve-top and armhole narrow at the same time, sleeve-top narrows while armhole flat knit, flat sleeve-top narrows while armhole widens after flat knit. If the height difference between the sleeve-top and the armhole is large, a larger knitting ratio was used to compensate for the difference in the number of turns by knitting more body rows. The difference in curvature between the sleeve-top and the armhole of sweater was adjusted by increasing the narrowing number in the sleeve-top. According to the technological parameters of the sleeve-body of the sweater and the structural differences between the sleeve-top and the armhole, the knitting process of the sleeve-body joint of the whole-garment sweater has been developed, enabling the sweater to fit the body curve.

Key words: whole-garment knitting, flat-sleeve sweater, sleeve-body connection, knitting ratio, process of narrowing and widening

CLC Number: 

  • TS184.5

Fig.1

Sleeve-body connection shape of flat-sleeve sweater"

Fig.2

Sleeve-body connection segmentation design"

Tab.1

Number of stitches and revolutions in each part at joint of sleeve and body"

部位 部位尺寸/cm 针数/转数
胸宽针数w1 42.0 278
前上胸宽针数w2 32.0 212
肩宽针数w3 34.0 224
夹深转数d 18.6 164
袖宽针数e 14.5 96
接肩针数f 6.0 40
袖山高转数g 12.0 108
袖山/袖窿转数差h — 56

Fig.3

Schematic diagram of process parameters at joint of sleeve and body"

Fig.4

Knitting diagram (a) and result diagram (b) of sleeve-top narrows and armhole widens"

Fig.5

Knitting diagram (a) and result diagram (b) of sleeve-top narrows and armhole flat-knitting"

Fig.6

Sweater structure with different knitting ratios"

Fig.7

Knitting diagram (a) and result diagram (b) of sleeve-top and armhole narrow at the same time"

Fig.8

Diagram at joint of sleeve and body"

Tab.2

Knitting process table at joint of sleeve and body"

部段 编织
转数		 收放针
针数		 收放针
工艺		 袖身
编织比率		 平袖山编
收比率
A a1 92 32 2-2-13
4-2-2
6-2-1		 1:1 —
a2 平52
a'1 32 2-2-1
4-2-2
a'2 6-2-5
8-2-4
6-2-2
a'3 4-2-2
B b 32 0 平32 2:4:3 —
b' 24 4-3-8
C c1 40 6 平16 — 0:1:1
c2 4+1+6
c' 40 2-2-20

Fig.9

Diagram of whole-garment flat-sleeve sweater"

[1] 王敏, 丛洪莲, 蒋高明, 等. 四针床电脑横机的全成形工艺[J]. 纺织学报, 2017, 38(4):61-67.
WANG Min, CONG Honglian, JIANG Gaoming, et al. Whole garment knitting process on four-bed computerized flat knitting machine[J]. Journal of Textile Research, 2017, 38(4):62-63.
[2] 彭佳佳, 蒋高明, 丛洪莲, 等. 全成形毛衫的结构与编织原理[J]. 纺织学报, 2017, 38(11):48-55.
PENG Jiajia, JIANG Gaoming, CONG Honglian, et al. Structure and knitting principle of whole garment[J]. Journal of Textile Research, 2017, 38(11):48-55.
[3] 邱庄岩, 吴志明, 蒋高明. 全成形毛衫肩袖成形工艺[J]. 纺织学报, 2018, 39(3):56-60,66.
QIU Zhuangyan, WU Zhiming, JIANG Gaoming. Forming process of shoulder and sleeves of whole garment[J]. Journal of Textile Research, 2018, 39(3):56-60,66.
[4] 邱庄岩, 吴志明. 全成形毛衫袖窿成形工艺[J]. 毛纺科技, 2019, 47(4):43-47.
QIU Zhuangyan, WU Zhiming. Armhole forming process of full fashioned garment[J]. Wool Textile Journal, 2019, 47(4):43-47.
[5] 丛洪莲, 王迪. 针织毛衫的袖型建模与工艺实现[J]. 纺织学报, 2014, 35(8):69-75.
CONG Honglian, WANG Di. Modeling and technology realization of knitted sweater sleeve type[J]. Journal of Textile Research, 2014, 35(8):69-75.
[6] 范友红. 基于服装结构原理的针织毛衫板型优化探讨[D]. 上海:东华大学, 2007:11-19.
FAN Youhong. Based on the theory of garment pattern to study the sweater optimization[D]. Shanghai: Donghua University, 2007:11-19.
[7] 王盼, 吴志明. 全成形毛衫局部编织原理及其应用[J]. 纺织学报, 2019, 40(5):41-46.
WANG Pan, WU Zhiming. Principle and application of partial knitting on fully formed sweater[J]. Journal of Textile Research, 2019, 40(5):41-46.
[8] 罗璇, 彭佳佳, 蒋高明, 等. 全成形毛衫样板设计及成形方法[J]. 纺织学报, 2018, 39(7):105-110.
LUO Xuan, PENG Jiajia, JIANG Gaoming, et al. Design and knitting shaping method of fully-fashioned knitwear[J]. Journal of Textile Research, 2018, 39(7):105-110.
[9] 李珂, 吴志明. 基于收针工艺的全成形毛衫分割线设计原理[J]. 纺织学报, 2019, 40(6):86-91.
LI Ke, WU Zhiming. Design principle of secant line for whole garment sweater based on narrowing process[J]. Journal of Textile Research, 2019, 40(6):86-91.
[10] 卢致文, 牛梅. 基于纸样的毛衫装袖工艺计算方法[J]. 毛纺科技, 2017, 45(10):12-16.
LU Zhiwen, NIU Mei. Study on the process calculation method of sweater sleeve based on paper pattern[J]. Wool Textile Journal, 2017, 45(10):12-16.
[1] LIU Haisang, DONG Zhijia, ZHANG Qi, XIA Fenglin, CONG Honglian. Size prediction and size modeling of warp knitted seamless sport suits [J]. Journal of Textile Research, 2019, 40(02): 76-81.
[2] . Design on technological pattern for seamless underwear [J]. Journal of Textile Research, 2015, 36(07): 100-103.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd