JOURNAL OF TEXTILE RESEARCH ›› 2013, Vol. 34 ›› Issue (4): 122-126.

Previous Articles     Next Articles

Three dimensional flow field numerical simulation and analysis of compact spinning with perforated rollers

  

  • Received:2012-04-17 Revised:2013-01-07 Online:2013-04-15 Published:2013-04-09

Abstract: In this paper, using Fluent to analogue simulation to compact area airflow of compact spinning with perforated rollers,it can analyse and evaluate the air current distribution vividly and intuitively,quantitative analyse the characteristics of static pressure and distribution rules of velocity in the compact zone. The results indicate that static pressure increasing gradually from the wall of round hole to the centre of the round hole, and the round hole static pressure at air suction slot centre line is greater than other position. The air movement is not isolated between two round holes, the airflow of low position is affected by round hole, every axial velocity presents waviness with round hole turns up intervallic. The airflow of high position is more stable, every axial velocity hasn’t intervallic saltation.

Key words: perforated roller, Fluent, three dimensional flow field, simulation, compact spinning

[1] . Comprehensive performance of auxiliary nozzle of air-jet loom based on Fluent [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(08): 124-129.
[2] . Algorithm of processing code generation for pattern spline curves [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(07): 153-158.
[3] . Digital yarn appearance simulation [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(07): 148-152.
[4] . Simulation of one-piece flow garment assembly line based on Flexsim software [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(06): 155-161.
[5] . Simulation of steady heat transfer on fabrics system embedded with heating unit in electrically heated clothing [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(05): 49-55.
[6] . Structure of left-right section for human body in three-dimensional garment simulation [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 158-162.
[7] . Variable diameter braiding with constant cover factor [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(04): 54-62.
[8] . Simulation of fluid flow in rotor composite spinning unit and analysis on yarn quality [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(03): 26-30.
[9] . Simulation of electronic shogging system on warp knitting machine based on Simulink [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 150-156.
[10] . Structural formation mechanism of multiple condensed spun yarn and properties of knitted fabric thereof [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 26-31.
[11] . Simulation on fiber motion in airflow field of transfer channel [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 55-61.
[12] . Simulation of warp knitted plush fabric based on fractal noise and geometry shader [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 171-176.
[13] . influence of hollow spindler structure parameters on flow field of air jet vortex spinning [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(12): 135-140.
[14] . Finite element simulation on tensile mechanical properties of three-elementary weave fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(11): 41-47.
[15] . Modeling and numerical simulating for for residual ammonia volatilization from yarn bobbin [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(09): 149-154.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!