JOURNAL OF TEXTILE RESEARCH ›› 2014, Vol. 35 ›› Issue (8): 116-0.

Previous Articles     Next Articles

Research progress of reinforced fabrics used for composite helmet shells

  

  • Received:2013-06-17 Revised:2013-12-03 Online:2014-08-15 Published:2014-08-15

PDF (PC)

670

Abstract: As important personal protective equipments, helmets have evolved from metal to fiber reinforced composites. Given the structural defects of traditional laminated composites helmet shells, this paper reviews the research works focusing on composites helmet shells reinforced with integrated fabrics, which emphasize fabric structure, fabric mouldability, impact and ballistic performance of composites. Meanwhile, it suggests some problems and research topics in the future, especially the relationship between fabric structure and mouldability, effectiveness of fabric structure and deformation against properties of fiber reinforced composites.

Key words: fibe reinforced composite, helmet shell, reinforced fabric, mouldability, impact, ballistic performance

CLC Number: 

  • TB 332
[1] . Finite element analysis of curved multi-axial warp-knitted composite car door under low-velocity impact [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 43-48.
[2] . Modeling analysis on impact damage of 3-D angle-interlock woven composite based on finite element [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(07): 63-68.
[3] . Preparation and high velocity impact performance of combined 3-D woven composites [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(3): 60-0.
[4] . Finite element analysis on ballistic impact edge part of three-dimensional woven fabric reinforced composite [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(05): 68-0.
[5] . Investigation on impact properties of 2-D triaxial braided-hybrid laminated composites [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(10): 54-0.
[6] . Analysis of impact resistance of core structural reinforcement composite based on finite element analysis [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(08): 62-67.
[7] zhen-qian lu. Study on the impact property of silicone rubber filled warp knitted spacer fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(9): 51-0.
[8] . Impact properties of warp knitted spacer fabrics [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(4): 45-52.
[9] . Largely deformable fabric sensor matuix for on-line impact measurement [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(2): 45-50.
[10] SONG Xiao-Bang, JIN Li-Min, WANG Chun-Xia. Comparative analysis of impact resistance between unidirectional composite and pure resin material [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(6): 15-19.
[11] . Impact damage modeling of unidirectional composite [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(10): 47-50.
[12] WAN Guangjian;LU Lihua;YU Yongling;ZHAO Yuping;WEI Chunyan. Mechanical properties of bi-axial warp knitted glass fiberboard under transverse impact [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(1): 46-50.
[13] LIAN jun;GU Bohong. Numerical simulation of dynamic performance of three-dimensional braided composites [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(1): 41-45.
[14] TANG Yuyuan;LI Hong;ZHANG Wei;DING Xin. Dynamic impact behavior of 3-D woven fabric composite [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(2): 44-49.
[15] SONG Xiaobang;JIN Limin;WANG Chunxia;. Simulation calculation and analysis of 2-D fabric impact response [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(11): 57-61.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd