纺织学报 ›› 2018, Vol. 39 ›› Issue (05): 144-149.doi: 10.13475/j.fzxb.20170709806

• 综合述评 • 上一篇    下一篇

高温液体及蒸汽防护服装防护性能研究进展

  

  • 收稿日期:2017-07-27 修回日期:2018-01-11 出版日期:2018-05-15 发布日期:2018-05-10

Research progress of protection properties of protective clothing against steam and hot liquid spray

  • Received:2017-07-27 Revised:2018-01-11 Online:2018-05-15 Published:2018-05-10

摘要:

为合理评价高温液体和高压蒸汽防护服的防护性能,通过回顾国内外实验室模拟高温液体和高压蒸汽环境中防护服装性能研究的最新成果,从“人体-服装-环境”系统的角度分析了影响高温液体和蒸汽防护服装防护性能的关键因素;总结了现阶段防护服高温液体和蒸汽防护性能的测评技术和标准;从服装材料基本性能和静态空气层等服装因素、人体体型、人体出汗、人体运动以及造成的磨损等人体因素,以及灾害种类、冲击角度、温度、距离、压力等环境因素3个维度归纳了各因素对服装防护性能的具体影响;指出了目前在服装、人体、环境3个因素中研究存在的不足,预测了未来探索高温液体及蒸汽防护性能的研究方向,提出在今后的研究中应建立全面的高温液体和蒸汽防护性能评价体系,以提高高温液体和蒸汽防护性能测评的准确性。

关键词: 高压蒸汽, 高温液体, 防护性能, 防护服装

Abstract:

To properly evaluate the protective performance of protective clothing against hot water spray and pressurized steam, the current domestic and foreign studies using simulated laboratory tests were comprehensively reviewed. The potential factors influencing the protective performance against hot liquid spray and steam were analyzed from the perspective of “human-protective clothing-environment” system. The present test technologies and evaluation standards were introduced. Then, the effects of influencing factors on the protective performance were summarized. These factors were consisted of three factors, i.e., clothing factor such as basic properties of protective material and static air gap size, human factor such as body shape, sweating status, garment deformation and abrasion caused by body movement, and environmental factor, including types of thermal hazards, temperature, distance, pressure, impingement angle, etc. Finally, the drawbacks of current studies were pointed out and the development trends of protective performance evaluation were predicted. It is imperative to establish a comprehensive evaluation system to improve the accuracy of protective performance against hot liquid spray and steam.

Key words: pressurized steam, hot liquid spray, thermal protection, protective clothing

[1] 李冻 陈太球 蒋春燕 傅佳佳 王鸿博. 原料及结构参数对防电弧织物性能的影响[J]. 纺织学报, 2018, 39(08): 41-45.
[2] 翟胜男 陈太球 蒋春燕 傅佳佳 王鸿博. 消防服外层织物热防护性与舒适性综合评价[J]. 纺织学报, 2018, 39(08): 100-104.
[3] 王丽君 卢业虎 王帅 马妮妮. 形状记忆合金尺寸对消防服面料防护性能的影响[J]. 纺织学报, 2018, 39(06): 113-118.
[4] 马妮妮 卢业虎 戴宏钦. 形状记忆材料在功能防护服中的应用[J]. 纺织学报, 2018, 39(04): 170-174.
[5] 卢琳珍 徐定华 徐映红. 应用三层热防护服热传递改进模型的皮肤烧伤度预测[J]. 纺织学报, 2018, 39(01): 111-118.
[6] 贾琳 王西贤 张海霞 覃小红. 防紫外线聚丙烯腈复合纳米纤维的制备及其性能[J]. 纺织学报, 2017, 38(10): 1-6.
[7] 贾琳 王西贤 张海霞 覃小红. 聚丙烯腈/二氧化钛纳米纤维的紫外线防护性能[J]. 纺织学报, 2017, 38(07): 18-22.
[8] 赖军 张梦莹 张华 李俊. 消防服衣下空气层的作用与测定方法研究进展[J]. 纺织学报, 2017, 38(06): 151-156.
[9] 苏云 李俊. 火灾环境下防水透气层对消防服热湿防护性能的影响[J]. 纺织学报, 2017, 38(02): 152-158.
[10] 管曼好 贾汪洋 吉洋 李俊. 热水侵入条件对织物防护性能的影响[J]. 纺织学报, 2016, 37(11): 98-102.
[11] 张梦莹 苗勇 李俊. 防火服热蓄积的影响因素及其测评方法[J]. 纺织学报, 2016, 37(06): 171-176.
[12] 马春杰 崔志英 . 光湿复合老化对消防服用织物性能的影响[J]. 纺织学报, 2015, 36(09): 82-88.
[13] 李小辉 管曼好 李俊. 防火服织物的服用热防护性能评价方法[J]. 纺织学报, 2015, 36(08): 110-115.
[14] 姚瑞祥 王燕珍. 行走和慢跑状态下护膝的防护效果[J]. 纺织学报, 2015, 36(06): 106-0.
[15] 朱方龙 樊建彬 冯倩倩 周宇. 相变材料在消防服中的应用及可行性分析[J]. 纺织学报, 2014, 35(8): 124-0.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!