纺织学报 ›› 2014, Vol. 35 ›› Issue (1): 40-0.

• 纺织工程 • 上一篇    下一篇

经编浮纹贾卡提花原理

程龙 蒋高明   

  1.  江南大学经编技术教育部工程研究中心
  • 收稿日期:2013-01-09 修回日期:2013-06-25 出版日期:2014-01-15 发布日期:2014-01-15
  • 通讯作者: 蒋高明 E-mail:jiang@526.cn
  • 基金资助:

    国家科技支撑计划项目;江苏省产学研联合创新资金-前瞻性联合研究项目

Principle of warp knitted Broché jacquard

  • Received:2013-01-09 Revised:2013-06-25 Online:2014-01-15 Published:2014-01-15

摘要: 针对目前国内外对经编浮纹贾卡提花原理研究甚少,在其实际应用中受瓶颈制约,本文研究了浮纹型贾卡提花织物的特点和基本形成原理,并在此基础上对选针原理、钩针运动规律进行了深入的分析和探讨。根据上机实验采集的数据,建立了钩针位移曲线模型,对应空间和时间的二维坐标,更为深入合理地描述了钩针的运动特性。此外,还建立了单纱选择的图示模型,详细阐明了单纱选择的具体实现过程及其实现路线。最后,分析了浮纹贾卡提花的压纱结构,探寻出适合浮纹贾卡提花的压纱方式,并且还比较了浮纹花纹和绣花花纹、剪线花纹在形成原理上的区别,体现出浮纹花纹在生产和性能方面的综合优势。以上研究可为经编浮纹贾卡提花机构及产品的设计提供参考。

关键词: 经编, 浮纹, 贾卡, 单纱选择

Abstract: In view of the fact that the theory of warp knitted broché Jacquard is rarely studied, here and abroad, and its technology bottleneck in application field, this paper probes into the characteristics and basic principle of broché jacquard fabric. Based on the content, an in-depth analysis and investigation on the needle selection principles, and movement rules of crochet hook are undertaken. According to the statistics from experimental trials on the machine, the displacement curve model of crochet hook, corresponding to the space and time axis, is built, and thus its motion characteristics are more deeply and rationally illustrated. In addition, the graphical model of single-yarn selection is also built which explains in detail the concrete realization process of single-yarn selection and its implementation route. Lastly, the structure of broché jacquard fall-plate lapping is analyzed, meanwhile, a suitable mode for broché jacquard is equally figured out. Moreover, after a comparison in formation theories with the embossed pattern and slap-up cutting pattern, the broché pattern demonstrates its own comprehensive advantages in terms of production and performance. The above research on principles about warp knitted broché Jacquard could provide a reference to the design of broché jacquard machine as well as its products.

Key words: warp knitting, Broché, single-yarn selection

中图分类号: 

  • TS181.8
[1] 苏柳元 孟婥 张玉井 赵义满. 经编机梳栉横移系统误差建模与仿真[J]. 纺织学报, 2018, 39(08): 130-137.
[2] 张艳 贺克杰 李欣欣 蒋高明. 多梳拉舍尔花边的多层次设计[J]. 纺织学报, 2018, 39(07): 44-49.
[3] 徐丽玉 董智佳 丛洪莲 刘海桑. 经编全成形室内健身服的尺寸预测[J]. 纺织学报, 2018, 39(04): 100-105.
[4] 张灵婕 缪旭红 万爱兰 蒋高明 陈方芳. 上浆前处理剂对经编用棉纱性能的影响[J]. 纺织学报, 2018, 39(04): 82-86.
[5] 常玉萍 马丕波. 负泊松比经编间隔织物的准静态拉伸性能[J]. 纺织学报, 2018, 39(04): 47-53.
[6] 董智佳 蒋高明 丛洪莲 张爱军. 经编全成型运动装款式建模与工艺实现[J]. 纺织学报, 2018, 39(02): 38-42.
[7] 冯勇 蒋高明 吴志明 徐存东. 基于物联网的经编制造执行系统关键技术[J]. 纺织学报, 2018, 39(02): 144-149.
[8] 郑静 夏风林 刘浪. 基于Simulink的经编机电子横移系统仿真[J]. 纺织学报, 2018, 39(02): 150-156.
[9] 胡瑜 刘行 缪旭红. 经编纱线动态张力评价指标[J]. 纺织学报, 2018, 39(02): 68-72.
[10] 高哲 蒋高明. 多轴向经编曲面复合材料汽车门低速碰撞数值模拟[J]. 纺织学报, 2018, 39(02): 43-48.
[11] 张爱军 蒋高明 李欣欣 丛洪莲. 基于分形噪声和几何着色器的经编毛绒织物仿真[J]. 纺织学报, 2018, 39(02): 171-176.
[12] 张舒 缪旭红 RAJI Rafiu King 孙婉. 经编导电针织物的应变—电阻传感性能[J]. 纺织学报, 2018, 39(02): 73-77.
[13] 李筱一 缪旭红 蒋高明. 双针床单贾卡经编织物网眼数量与送经量的关系[J]. 纺织学报, 2018, 39(01): 51-55.
[14] 谢远鹏 蒋高明 张爱军 张燕婷 陈方芳. 双色效应压纱贾卡提花织物的计算机辅助设计[J]. 纺织学报, 2017, 38(12): 157-161.
[15] 耿奕 蒋金华 陈南梁. 经编四轴向玻璃纤维织物的渗透行为和渗透率[J]. 纺织学报, 2017, 38(10): 49-56.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!