纺织学报 ›› 2015, Vol. 36 ›› Issue (06): 42-49.

• 纺织工程 • 上一篇    下一篇

T形截面三维编织复合材料细观结构分析及弯曲性能预测

  

  • 收稿日期:2014-04-14 修回日期:2015-03-12 出版日期:2015-06-15 发布日期:2015-06-17
  • 通讯作者: 瞿畅 E-mail:xu.ch@ntu.edu.cn

Micro-structure analysis and bending property prediction of three-dimensional braided composites with T section

  • Received:2014-04-14 Revised:2015-03-12 Online:2015-06-15 Published:2015-06-17

摘要:

根据矩形组合截面三维编织复合材料四步法编织原理,分析了T形截面编织物的纱线运动规律,按照载纱器的水平运动规律确定了纱线的空间运动轨迹,并用控制体积法建立T形截面交接区域的特殊细观结构模型。在假设纱线截面为椭圆形等理想状态下,建立了编织工艺参数之间的数学关系。运用弯曲刚度合成法预测了T形截面三维编织复合材料的弯曲性能,用MatLab编写了弯曲模量的计算程序。结果表明:弯曲模量随编织角的增大而减小,随纤维体积含量的增加而增大,三维五向T形截面梁的弯曲性能优于三维四向的。最后将预测结果与实验结果进行比较分析,结果证实用弯曲刚度合成法预测T形截面三维编织复合材料的弯曲性能是可靠的。

关键词: 三维编织, T形截面, 细观结构, 弯曲性能

Abstract:

 According to the 4-step braiding principle of preforms with complex rectangular cross section, the yarns paths in braided preforms with T section were analyzed. The spatial paths of yarns were speculated in accordance with the movenents of carriers. By the volume-control method, the special micro-structure model in the join region of composites with T section was established. Assuming the yarn coss-section is an ellipse and under other ideal conditions, the mathematical relationship between braiding parameters was deduced. The bending modulus was predicted by the MatLab program which was developed based on bending stiffness synthesis method. The results showed that bending modulus decreased with braiding angle increasing and increased with fiber volume increasing, and bending property of T beam of three dimensional five directional braided composites was superior to T beam of three dimensional four directional braided composites. Finally, compared with the experimental results, the validity of bending property predicted by this method was verified.

Key words: three-dimensional braideng, T section, micro-structure, bending property

中图分类号: 

  • TS181
[1] 贾树生 万振凯 杨连贺 张恒杰. 碳纳米线的拉伸应变传感特性[J]. 纺织学报, 2018, 39(03): 14-18.
[2] 孙颖 刘俊岭 郑园园 陈利 李嘉禄. 碳/芳纶混编三维编织复合材料拉伸性能[J]. 纺织学报, 2018, 39(02): 49-54.
[3] 贾树生 杨连贺 白会肖 万振凯 . 嵌入三维编织复合材料的碳纳米线应变传感特性[J]. 纺织学报, 2018, 39(01): 11-18.
[4] 吕丽华 黄耀丽 崔婧蕊. 蜂窝状三维整体机织复合材料的弯曲性能及其有限元模拟[J]. 纺织学报, 2017, 38(11): 56-60.
[5] 蔡冯杰 祝成炎 田伟 吕智宁 申晓. 3D打印成型的玻璃纤维增强聚乳酸基复合材料[J]. 纺织学报, 2017, 38(10): 13-18.
[6] 高雄 胡侨乐 马颜雪 张琦 魏毅 邱夷平. 不同结构厚截面三维机织碳纤维复合材料的弯曲性能对比[J]. 纺织学报, 2017, 38(09): 66-71.
[7] 焦亚男 景媛媛 方鹏 赵玉芬. 立体编织石英纤维热密封环的气密性能[J]. 纺织学报, 2017, 38(06): 46-51.
[8] 万振凯 贡丽英 万莉. 基于损伤指数的三维编织复合材料结构损伤评估[J]. 纺织学报, 2017, 38(05): 69-74.
[9] 刘宜胜 徐海亮 吴震宇 袁嫣红. 三维编织机运动仿真分析及其轨道优化设计[J]. 纺织学报, 2017, 38(04): 134-139.
[10] 吕丽华 张雪飞 闫淑娟 钱永芳 叶方 赵玉萍. T字型三维机织物设计及其复合材料弯曲性能[J]. 纺织学报, 2016, 37(12): 49-54.
[11] 万莉 郭建民 马永军. 三维编织复合材料弯曲承载下嵌入碳纳米线的特性分析[J]. 纺织学报, 2016, 37(01): 57-63.
[12] 万振凯 贾敏瑞. 基于磁通图像的平板三维编织复合材料试件内部缺陷检测[J]. 纺织学报, 2015, 36(08): 49-55.
[13] 吴巧英 胡滢 吴春胜 劳世慧. 不同织物弯曲性能测试仪测试结果的比较[J]. 纺织学报, 2015, 36(07): 126-130.
[14] 孙淑瑶 纪峰 王岩 邱夷平 谢剑飞 娄琳. 小应力下织物拉伸和弯曲性能对其湿态贴体性的影响[J]. 纺织学报, 2014, 35(8): 27-0.
[15] 刘成霞 韩永华 张才前. 基于图像处理的织物弯曲性能测试方法[J]. 纺织学报, 2013, 34(7): 52-56.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!