纺织学报 ›› 2016, Vol. 37 ›› Issue (09): 42-47.

• 纺织工程 • 上一篇    下一篇

组织工艺参数对经编送经量的影响

  

  • 收稿日期:2015-10-10 修回日期:2016-06-04 出版日期:2016-09-15 发布日期:2016-09-19

Influence of weave parameters on warp-knitted run-in values

  • Received:2015-10-10 Revised:2016-06-04 Online:2016-09-15 Published:2016-09-19

摘要:

为提高经编送经量的预测精度,测试了5种不同组织工艺参数下38种试样的送经量,并采用IBM SPSS19进行单因素分析和多元线性回归分析,得出各组织工艺参数因素与送经量间的关系;建立送经量多元线性回归预测模型。研究结果表明:针背横移、针前横移与送经量成正相关且影响程度大,牵拉密度、机号与送经量成负相关且影响程度较小,总穿经率对送经量的影响程度很小;组织工艺参数对送经量影响程度由大到小排序依次为针背横移、针前横移、牵拉密度、机号和总穿经率;得出的多元线性预测模型具有较好预测精度,可为送经量的预测提供一定的参考。

关键词: 送经量, 经编, 组织工艺参数, 线性回归

Abstract:

To improve prediction accuracy of warp knitting run-in values, run-in values of 38 samples with 5 different weave parameters were measured. Then, experimental results were analyzed by SPSS19 to research the relationship between run-in values and fabric weave parameters. Moreover, a multiple linear regression model for forecasting run-in values were suggested. It is indicated by the result that both of overlap shogging and underlap shogging have significant positive correlation with the run-in values; both of take-up density and machine gauge have negative correlation with run-in values; run-in values are slightly positive affected by total rate of threading; The impact significance of the 5 factors from big to small is in the order of underlap shogging, overlap shogging, take-up density, machine gauge and total rate of threading. Furthermore, a multiple linear regression model was obtained to provide reference for predicting run-in values.

Key words: run-in value, warp knitting, weave parameters, linear regression

[1] 苏柳元 孟婥 张玉井 赵义满. 经编机梳栉横移系统误差建模与仿真[J]. 纺织学报, 2018, 39(08): 130-137.
[2] 张艳 贺克杰 李欣欣 蒋高明. 多梳拉舍尔花边的多层次设计[J]. 纺织学报, 2018, 39(07): 44-49.
[3] 徐丽玉 董智佳 丛洪莲 刘海桑. 经编全成形室内健身服的尺寸预测[J]. 纺织学报, 2018, 39(04): 100-105.
[4] 张灵婕 缪旭红 万爱兰 蒋高明 陈方芳. 上浆前处理剂对经编用棉纱性能的影响[J]. 纺织学报, 2018, 39(04): 82-86.
[5] 常玉萍 马丕波. 负泊松比经编间隔织物的准静态拉伸性能[J]. 纺织学报, 2018, 39(04): 47-53.
[6] 董智佳 蒋高明 丛洪莲 张爱军. 经编全成型运动装款式建模与工艺实现[J]. 纺织学报, 2018, 39(02): 38-42.
[7] 冯勇 蒋高明 吴志明 徐存东. 基于物联网的经编制造执行系统关键技术[J]. 纺织学报, 2018, 39(02): 144-149.
[8] 郑静 夏风林 刘浪. 基于Simulink的经编机电子横移系统仿真[J]. 纺织学报, 2018, 39(02): 150-156.
[9] 胡瑜 刘行 缪旭红. 经编纱线动态张力评价指标[J]. 纺织学报, 2018, 39(02): 68-72.
[10] 高哲 蒋高明. 多轴向经编曲面复合材料汽车门低速碰撞数值模拟[J]. 纺织学报, 2018, 39(02): 43-48.
[11] 张爱军 蒋高明 李欣欣 丛洪莲. 基于分形噪声和几何着色器的经编毛绒织物仿真[J]. 纺织学报, 2018, 39(02): 171-176.
[12] 张舒 缪旭红 RAJI Rafiu King 孙婉. 经编导电针织物的应变—电阻传感性能[J]. 纺织学报, 2018, 39(02): 73-77.
[13] 李筱一 缪旭红 蒋高明. 双针床单贾卡经编织物网眼数量与送经量的关系[J]. 纺织学报, 2018, 39(01): 51-55.
[14] 谢远鹏 蒋高明 张爱军 张燕婷 陈方芳. 双色效应压纱贾卡提花织物的计算机辅助设计[J]. 纺织学报, 2017, 38(12): 157-161.
[15] 耿奕 蒋金华 陈南梁. 经编四轴向玻璃纤维织物的渗透行为和渗透率[J]. 纺织学报, 2017, 38(10): 49-56.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!