纺织学报 ›› 2016, Vol. 37 ›› Issue (09): 48-52.

• 纺织工程 • 上一篇    下一篇

经编贾卡提花间隔织物的顶破性能

  

  • 收稿日期:2015-08-03 修回日期:2016-05-11 出版日期:2016-09-15 发布日期:2016-09-19

Bursting properties of warp knitted jacquard spacer fabrics

  • Received:2015-08-03 Revised:2016-05-11 Online:2016-09-15 Published:2016-09-19

摘要:

为探讨不同经编提花间隔织物结构的顶破性能差异,采用在拉舍尔双针床贾卡经编机上编织的8种不同提花结构的织物进行顶破性能试验,分析不同织物的顶破强力大小和顶破曲线特征,解释了经编间隔织物的顶破机制,并从提花面结构角度讨论对织物顶破强力的影响。结果表明:平布层和提花层分别影响间隔织物顶破过程的第1、2阶段;间隔层结构决定间隔织物顶破高度;提花面结构决定间隔织物顶破强力大小,厚组织顶破强力大于薄组织,顶破强力与网孔尺寸成反比关系;在鞋用经编提花间隔织物的设计中,可根据鞋面部位和功能需求进行灵活的组织搭配,丰富鞋材的花纹图案。

关键词: 经编, 间隔织物, 贾卡提花, 顶破性能

Abstract:

The samples were of 8 warp knitted spacer yarns with discuss the different mesh sixes and basic patterns wereselected to descuss the difference of bursting properties. The bursting curve characters and bursting strength of different fabrics were analyzed. The bursting mechanism and impact of bursting strength and reduction from jacquard surface and spacer-layer were analysed. The results showed that that  plain layer has an influence on the first stage of bursting process but the facquard plain is second. The bursting strength was decided by jacquard surface structure and thick structure was greater than that of thin structure. The bursting strength was inversely proportional to the length of the mesh. The spacer structure played a buffer role during the bursting process and increased the fabric reduction. This research provides design consideration and theoretical research foundation for the application of warp knitted facquard spacer fabrics in clothing industry.

Key words: warp knitting, spacer fabric, facquard, bursting property

[1] 苏柳元 孟婥 张玉井 赵义满. 经编机梳栉横移系统误差建模与仿真[J]. 纺织学报, 2018, 39(08): 130-137.
[2] 张艳 贺克杰 李欣欣 蒋高明. 多梳拉舍尔花边的多层次设计[J]. 纺织学报, 2018, 39(07): 44-49.
[3] 徐丽玉 董智佳 丛洪莲 刘海桑. 经编全成形室内健身服的尺寸预测[J]. 纺织学报, 2018, 39(04): 100-105.
[4] 张灵婕 缪旭红 万爱兰 蒋高明 陈方芳. 上浆前处理剂对经编用棉纱性能的影响[J]. 纺织学报, 2018, 39(04): 82-86.
[5] 常玉萍 马丕波. 负泊松比经编间隔织物的准静态拉伸性能[J]. 纺织学报, 2018, 39(04): 47-53.
[6] 董智佳 蒋高明 丛洪莲 张爱军. 经编全成型运动装款式建模与工艺实现[J]. 纺织学报, 2018, 39(02): 38-42.
[7] 冯勇 蒋高明 吴志明 徐存东. 基于物联网的经编制造执行系统关键技术[J]. 纺织学报, 2018, 39(02): 144-149.
[8] 郑静 夏风林 刘浪. 基于Simulink的经编机电子横移系统仿真[J]. 纺织学报, 2018, 39(02): 150-156.
[9] 张舒 缪旭红 RAJI Rafiu King 孙婉. 经编导电针织物的应变—电阻传感性能[J]. 纺织学报, 2018, 39(02): 73-77.
[10] 胡瑜 刘行 缪旭红. 经编纱线动态张力评价指标[J]. 纺织学报, 2018, 39(02): 68-72.
[11] 高哲 蒋高明. 多轴向经编曲面复合材料汽车门低速碰撞数值模拟[J]. 纺织学报, 2018, 39(02): 43-48.
[12] 张爱军 蒋高明 李欣欣 丛洪莲. 基于分形噪声和几何着色器的经编毛绒织物仿真[J]. 纺织学报, 2018, 39(02): 171-176.
[13] 李晓英 马丕波 聂小林 蒋高明. 曲面三维横编间隔织物复合材料的压缩性能[J]. 纺织学报, 2018, 39(01): 62-65.
[14] 谢远鹏 蒋高明 张爱军 张燕婷 陈方芳. 双色效应压纱贾卡提花织物的计算机辅助设计[J]. 纺织学报, 2017, 38(12): 157-161.
[15] 耿奕 蒋金华 陈南梁. 经编四轴向玻璃纤维织物的渗透行为和渗透率[J]. 纺织学报, 2017, 38(10): 49-56.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!