纺织学报 ›› 2013, Vol. 34 ›› Issue (7): 115-120.

• 机械与器材 • 上一篇    下一篇

HC181条并卷联合机棉卷加压机构及其压力

贾国欣1,任家智2,冯清国2   

    1. 河南工程学院纺织学院
    2. 中原工学院纺织学院
  • 收稿日期:2012-07-30 修回日期:2012-11-16 出版日期:2013-07-15 发布日期:2013-07-15
  • 通讯作者: 贾国欣 E-mail:jgx.65@163.com
  • 基金资助:

    中国纺织联合会科技指导性项目

Lap pressure mechanism and its pressure of HC181 Unilap

  • Received:2012-07-30 Revised:2012-11-16 Online:2013-07-15 Published:2013-07-15
  • Contact: Guo-Xin JIA E-mail:jgx.65@163.com

摘要: 为了使条并卷联合机的棉卷成型良好、精梳条的质量优良,对HC181型条并卷联合机的加压机构及压力进行了研究。通过对加压机构的运动学、力学数学建模,编制matlab程序,计算并画出了保持棉卷成型良好的压力曲线,并模拟出了曲线相应的方程。把该压力方程输入可编程控制器(PLC)用以控制电子比例阀,调节气缸压强,对棉卷生成过程中的压力进行了在线控制。据此方法实际生产的棉卷,重量不匀率可降至0.1%。

关键词: 条并卷联合机, 加压机构, 棉卷, 压力分析

Abstract: In order to obtain better lap forming and combed sliver quality, that the pressure mechanism and stress have been studied on HC181 Unilip. Through kinematics and mechanical mathematical modeling to mechanism, compiling Matlab program, pressure curve that keeping lap forming better has been computed and drawn, and the corresponded pressure equation has been simulated. After the pressure equation putted into PLC(Programmable Logic Controller), PLC control electronic ratio valve to regulating cylinder pressure, lap pressure then be controlled on-line in the course of lap forming,. Weight unevenness of practical lap produced by above method can decrease to 0.1%.

Key words: Unillap, pressure mechanism, lap, pressure analysis

中图分类号: 

  • TS 103.22+5
[1] 李伟锋;张一风. 基于单片机的模糊速度控制在清花中的应用[J]. 纺织学报, 2006, 27(10): 99-101.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!