JOURNAL OF TEXTILE RESEARCH ›› 2013, Vol. 34 ›› Issue (5): 12-16.

Previous Articles     Next Articles

Preparation of water saving and moisture retention film for concrete curing

  

  • Online:2013-05-15 Published:2013-05-15

Abstract: A super-absorbent slurry was prepared with solution polymerization. Rayon non-woven fabric was prepared by the way of dipping, which made them with good water absorption, and the reaction conditions were optimized through ortho-experiment. The influence of hot pressing conditions on apparent water absorption and tensile properties of film was discussed, and the repeated water absorption ability and related structures were also analysised and characterized. The results showed that, when the monomer ratio was AA:AM=46:54, modified kaolin content was 2%, initiator content was 0.2%, crosslinker content was 0.1%,reaction temperature was 55°C, the apparent water absorption of membrane-based fabric could reach 5004.535 g/m2 , the water absorption and tensile properties were good in different hot-pressing temperature and time, and the quality of reuse was also very well.

Key words: retention film, absorbing cap ability, hot-pressing, tensile property, repeated water absorption

[1] . Control of physical and chemical properties of oxidation degummed ramie fiber with 1, 8-dihydroxyanthraquinone [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 78-85.
[2] . Tesile properties of carbon-aramid hybrid 3-d braided composites [J]. JOURNAL OF TEXTILE RESEARCH, 2018, 39(02): 49-54.
[3] . Classified extraction and properties of bamboo fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(11): 9-15.
[4] . Mechanical analysis of flame retardant three-strand yarn of polyester / aramid fiber / Poly(p-phenylene-2,6-benzo-bisoxazole) fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(06): 28-32.
[5] . Preparation and properties of polylactic acid/polypropylene blend spunbonded fibers [J]. JOURNAL OF TEXTILE RESEARCH, 2017, 38(01): 13-16.
[6] . Structure and property of methanol protein modified viscose fiber [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 12-15.
[7] . Mechanical properties of hemp/polylactic acid composite foamed material [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(01): 28-34.
[8] . Influence of micro-dissolution treatment on tensile properties of hemp/cotton blended fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2015, 36(10): 97-0.
[9] . Preparation and properties of jute/soybean dregs/starch composites [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(8): 44-0.
[10] . Impact of fabric tensile and bending properties on adhesion property under wet condition at low tension [J]. JOURNAL OF TEXTILE RESEARCH, 2014, 35(8): 27-0.
[11] . High temperature resistant PTFE membrane filter  prepared by adhesive-free hot-pressing [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(8): 22-0.
[12] . Spinning process of cellular photocatalyst fiber/cotton blended yarns and properties thereof [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(4): 32-36.
[13] . Over melting point forming of PP-SLSM and its performance [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(9): 15-19.
[14] XU Yan-Hua, YUAN Xin-Lin. Comparison of tensile properties of co-woven-knitted fabric and multi-layered biaxial weft knitted fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2012, 33(6): 30-34.
[15] Wang GuoXuan;GUO Xingfeng. Effect of magnetron sputtering coating time on mechanical property of PET filament [J]. JOURNAL OF TEXTILE RESEARCH, 2010, 31(7): 21-24.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!