Journal of Textile Research ›› 2020, Vol. 41 ›› Issue (02): 64-68.doi: 10.13475/j.fzxb.20190305805

• Textile Engineering • Previous Articles     Next Articles

Molding principle and weaving of three-dimensional geometric pleated fabric

SUN Ting, LÜ Zhining, LI Yanqing, ZHU Chengyan, TIAN Wei()   

  1. Key Laboratory for Advanced Textile Materials and Manufacturing Technology, Ministry of Education, Zhejiang Sci-Tech University, Hangzhou, Zhejiang 310018, China
  • Received:2019-03-19 Revised:2019-08-25 Online:2020-02-15 Published:2020-02-21
  • Contact: TIAN Wei E-mail:tianwei_zstu@126.com

RichHTML

6

PDF (PC)

145

Abstract:

In order to widen the design idea of three-dimensional geometric pleated fabrics, and design pleated fabrics with three-dimensional geometric effects, the forming principle of the three-dimensional geometric pleated fabrics was studied and discussed. The design started from drawing folding lines in a two-dimensional fabric, forming the geometric pattern of a certain regularity, and the geometric patterns were classified into convex fold areas and concave fold areas by the fold line. Different weaves were used in different folded areas, and elastic and inelastic yarns were used for alternate weft insertion. This procedure was used as the base design for three-dimensional geometric fold fabrics. The results show that on the basis of the designed geometric pattern, different weft backed weaves can be used to construct different folded areas, and in a particular case, silk is employed as the warp, polyester and spandex-coated elastic yarn and non-elastic polyester are selected as the weft for weaving the fabric. Such woven fabrics demonstrate that obvious three-dimensional geometric shapes can be created.

Key words: fold line, three-dimensional geometric pleat pattern, pleated fabric, fabric design

CLC Number: 

  • TS105.1

Fig.1

Pleated fabric pattern without horizontal folding area"

Fig.2

Schematic diagram of fabric weft pleat formation"

Fig.3

Pleated fabric pattern with horizontal folding area"

Fig.4

Schematic diagram of fabric warp wrinkling"

Fig.5

Design of three-dimensional geometric pleated fabric pattern. (a) Pattern 1; (b) Pattern 2;(c) Pattern 3; (d) Pattern 4"

Fig.6

Pleated fabric tissue diagram without horizontal folding area. (a) Convex fold area weave; (b) Lower concave fold area weave; (c) Non-folded area weave"

Fig.7

Local magnification of fabric pattern. (a) Enlarged view 1; (b) Enlarged view 2"

Fig.8

Pleated fabric tissue diagram with a horizontal folding area. (a) Weave 1; (b) Weave 2; (c) Weave 3; (d) Weave 4"

Tab.1

Fabric specification parameters"

经纱原料 蚕丝,3.11 tex
纬纱原料 甲纬: 涤纶(FDY),8.33 tex(黑色)
乙纬:涤纶(DTY),16.67 tex+氨纶,2.22 tex(白色)
投纬比 甲纬∶乙纬=1∶1
经密 40 根/cm
纬密 60 根/cm
筘号 50
筘齿穿入数 4
纹针数 2 400
储纬器 2
织造机械 剑杆织机+2720 针电子提花机

Fig.9

Solid geometry pleated fabric physical map. (a) Fabric 1; (b) Pleated effect by fabric 1;(c) Fabric 2; (d) Pleated effect by fabric 2"

[1] 严蓉, 钟蔚. 设计美学视角下的服装面料再造设计[J]. 武汉纺织大学学报, 2018,31(2):37-42.
YAN Rong, ZHONG Wei. Re-design of clothing fabric from the perspective of design aesthetics[J]. Journal of Wuhan Textile University, 2018,31(2):37-42.
[2] 问志秀, 乔南. 论服装设计中面料肌理以及再造形式[J]. 西部皮革, 2018,40(24):13.
WEN Zhixiu, QIAO Nan. Fabric texture and reconstruction in garment design[J] Western Leather, 2018,40(24):13.
[3] TREBBI Jean Charles. Art of the folding[M].[s.l.] Paris Design and Decoration, 2008: 3-26.
[4] 黄然. 从面料的角度谈服装设计中的褶皱艺术[J]. 艺术科技, 2018,31(5):107-108.
HUANG Ran. The wrinkle art in garment design from the angle of fabric[J]. Art Science and Technology, 2018,31(5):107-108.
[5] 祝佳. 褶皱的历史演变及在当代服装设计中的借鉴意义[J]. 纺织导报, 2013(12):71-72.
ZHU Jia. The historical evolution of folds and its reference in contemporary costume design[J]. China Textile Leader, 2013(12):71-72.
[6] 刘望微, 万宗瑜, 吴佳倩. 褶皱在服装中的应用[J]. 纺织科技进展, 2008(5):92-94.
LIU Wangwei, WAN Zongyu, WU Jiaqian. The application of folds in clothing[J]. Textile Technology Progress, 2008(5):92-94.
[7] 姜绪刚. 浅析褶裥在服装设计过程中的作用[J]. 轻纺工业与技术, 2013(6):78-79.
JIANG Xugang. Analysis of the role of pleated fabrics in fashion design[J]. Textile Industry and Technology, 2013(6):78-79.
[8] 黄晓瑶. 规则型褶皱在休闲女装设计中的应用研究[D]. 成都: 四川师范大学, 2017: 1-36.
HUANG Xiaoyao. Application of regular folds in casual women's wear[D]. Chengdu: Sichuan Normal University, 2017: 1-36.
[9] 宫海飞. 基于情绪体验的机织褶裥面料开发[D]. 上海: 东华大学, 2016: 11-26.
GONG Haifei. Development of woven pleated fabric based on emotional experience[D]. Shanghai: Donghua University, 2016: 11-26.
[10] 陈伟伟, 陈雁. 服装褶皱效果的评价[J]. 纺织学报, 2007,28(4):87-89.
CHEN Weiwei, CHEN Yan. Evaluation of wrinkles on the surface of a garment[J]. Journal of Textile Reaseatch, 2007,28(4):87-89.
[11] 于勤, 张春芳, 倪春锋. 经向局部管状织物的生产实践[J]. 上海纺织科技, 2010,38(2):37-38.
YU Qin, ZHANG Chunfang, NI Chunfeng. Production practice of warp-oriented local tubular fabric[J]. Shanghai Textile Science and Technology, 2010,38(2):37-38.
[1] . Design and performance of knitted suit fabrics [J]. Journal of Textile Research, 2018, 39(12): 47-52.
[2] . Design of double face dobby fabric by using stitching double weave [J]. JOURNAL OF TEXTILE RESEARCH, 2016, 37(09): 26-30.
[3] . Evaluation and analysis of perceptual images of clothing fabrics [J]. Journal of Textile Research, 2015, 36(03): 99-104.
[4] . Use of happening colour in sheared fabric [J]. JOURNAL OF TEXTILE RESEARCH, 2013, 34(12): 76-0.
[5] HU Keqin. Current status and development strategy of fabric creative design sector of China [J]. JOURNAL OF TEXTILE RESEARCH, 2011, 32(1): 149-154.
[6] PAN Chunyu;GAO Weidong. Applications of happening color in Chinese blue calico’s innovative design [J]. JOURNAL OF TEXTILE RESEARCH, 2009, 30(01): 88-90.
[7] ZHOU Qisu;SHEN Shide. Design of the magnetic weft-inserting mechanism for a new type sample weaving machine [J]. JOURNAL OF TEXTILE RESEARCH, 2007, 28(2): 112-114.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
No Suggested Reading articles found!
京ICP备14006648号
Copyright 2021 © Editorial office of Journal of Textile Research
Supported by Beijing Magtech Co.Ltd