纺织学报 ›› 2019, Vol. 40 ›› Issue (05): 41-46.doi: 10.13475/j.fzxb.20180600706

• 纺织工程 • 上一篇    下一篇

全成形毛衫局部编织原理及其应用

王盼, 吴志明()   

  1. 江南大学 教育部针织技术工程研究中心, 江苏 无锡 214122
  • 收稿日期:2018-06-01 修回日期:2018-10-29 出版日期:2019-05-15 发布日期:2019-05-21
  • 通讯作者: 吴志明
  • 作者简介:王盼(1991—),女,硕士生。主要研究方向为全成形产品编织工艺。
  • 基金资助:
    国家自然科学基金项目(61772238);国家轻工技术与工程一流学科自主课题资助项目(2018-28)

Principle and application of partial knitting on fully formed sweater

WANG Pan, WU Zhiming()   

  1. Engineering Research Center for Knitting Technology, Ministry of Education, Jiangnan University, Wuxi,Jiangsu 214122, China
  • Received:2018-06-01 Revised:2018-10-29 Online:2019-05-15 Published:2019-05-21
  • Contact: WU Zhiming

摘要:

为更好地实现全成形毛衫局部三维立体成形,以四针床电脑横机及SDS-ONE APPEX 3设计系统为依托,重点对局部编织在全成形毛衫上的应用进行研究。将局部编织工艺按照编织方法分为常规局部编织和按比例局部编织,探讨局部编织在肩斜、领部、下摆、挂肩以及平袖山部位的应用。结果表明:常规局部编织可形成光滑平整的肩部斜线形状、前后领深弧线、不规则下摆;按比例局部编织是全成形毛衫独有的编织方式,主要应用于挂肩和平袖山编织,可用于维持筒状编织平衡和实现袖子、大身的连接,形成存在一定高度差的筒状编织物;采用局部编织工艺可提高全成形毛衫的舒适性和美观性,也为毛衫款式开发提供思路,满足当代消费者的个性化需求。

关键词: 全成形毛衫, 局部编织, 结构应用, 四针床电脑横机

Abstract:

In order to better realize the partial three-dimensional forming of fully formed sweater, the application of the partial knitting principle on fully formed sweater based on the four-bed computerized flat knitting machine and design system of SDS-ONE APPEX 3 was researched emphatically. The partial knitting process was divided into normal partial knitting and partial knitting in proportion according to the knitting methods. The application of partial knitting in shoulder slope, neck, lower hem, hanging shoulder and flat sleeve top was discussed. The results show that the normal partial knitting can be applied to form the oblique line shape with smooth and smooth outer edge, front and back neck drop curve, irregular lower hem. The partial knitting in proportion is the unique knitting method of fully formed sweater. It is mainly applied in the process of hanging shoulder and flat sleeve top. It is applied to maintain a tubular balance and realize the connection of sleeves and body and a tube fabric with a certain height difference is formed at last. The adoption of partial knitting technology can improve the comfort and beauty of fully formed sweater, and also provide ideas for the design development of sweater, so as to meet the personalized needs of contemporary consumers.

Key words: fully formed sweater, partial knitting, structural application, four-bed computerized flat knitting machine

中图分类号: 

  • TS941.64

图1

局部编织 注:图中数字为编织行数。"

图2

单边暂停单边编织"

图3

两边暂停中间编织"

图4

中间暂停两边编织"

图5

使用2∶4∶3比例时纱嘴移动轨迹"

图6

平肩式1编织工艺"

图7

平肩式2编织工艺"

图8

落肩式编织工艺"

图9

领部局部编织应用"

图10

下摆部位局部编织应用"

图11

挂肩部位局部编织应用 注:图中灰色部分表示翻针、移圈工艺行。"

图12

平袖山部位局部编织应用"

[1] 王敏. 四针床电脑横机的全成形工艺[J]. 纺织学报, 2017,38(4):62-63.
WANG Min. Whole garment knitting process on four-bed computerized flat knitting machine[J]. Journal of Textile Research, 2017,38(4):62-63.
[2] 罗璇, 蒋高明, 丛洪莲. 采用局部编织技术的毛衫特殊结构工艺与设计[J]. 纺织学报, 2016,37(2):55-60.
LUO Xuan, JIANG Gaoming, CONG Honglian. Process and design of woolen sweater special structure based on partial technology[J]. Journal of Textile Research, 2016,37(2):55-60.
[3] 杨苏梅, 毛莉莉. 引返编织在羊毛衫设计中的应用[J]. 毛纺科技, 2009,37(1):44-48.
YANG Sumei, MAO Lili. Application of returning knit in woollen sweater design[J]. Wool Textile Journal, 2009,37(1):44-48.
[4] 邱庄岩, 吴志明, 蒋高明. 全成形毛衫肩袖成形工艺[J]. 纺织学报, 2018,39(3):56-60,66.
QIU Zhuangyan, WU Zhiming, JIANG Gaoming. Forming process of shoulder and sleeves of whole garment[J]. Journal of Textile Research, 2018,39(3):56-60,66.
[5] 蔡雨琪. 针织成形局部编织工艺的研究与设计创新[D]. 北京:北京服装学院, 2014: 22.
CAI Yuqi. The research and innovation design of partial knitting of fully fashioned knitwear[D]. Beijing:Beijing Institute of Fashion Technology, 2014: 22.
[6] 彭佳佳, 蒋高明, 卢致文, 等. 全成形毛衫在双针床电脑横机上的编织工艺[J]. 纺织学报, 2015,36(11):53-54.
PENG Jiajia, JIANG Gaoming, LU Zhiwen, et al. Technical study of whole garment on V-bed computerized flat knitting machine[J]. Journal of Textile Research, 2015,36(11):53-54.
[7] 彭佳佳, 蒋高明, 丛洪莲, 等. 全成形毛衫的结构与编织原理[J]. 纺织学报, 2017,38(11):48-55.
PENG Jiajia, JIANG Gaoming, CONG Honglian, et al. Structure and knitting principle of whole garment[J]. Journal of Textile Research, 2017,38(11):48-55.
[8] 杨卫平. 全成形毛衫的结构与编织工艺研究[D]. 上海:东华大学, 2016: 22-29.
YANG Weiping. Investigation on structure and knitting technology of fully fashioned sweater[D]. Shanghai:Donghua University, 2016: 22-29.
[9] 祝细. 电脑横机织可穿针织服装的编织工艺及其性能研究[D]. 天津:天津工业大学, 2011: 5-6.
ZHU Xi. Research of the knitting process and performance for knit & wear clothes on the domestic computerized flat knitting[D]. Tianjin: Tianjin Polytechnic University, 2011: 5-6.
[10] 丛洪莲, 王迪. 针织毛衫袖型建模与工艺实现[J]. 纺织学报, 2014,35(8):70-74.
CONG Honglian, WANG Di. Modeling and technology realization of knitted sweater sleeve type[J]. Journal of Textile Research, 2014,35(8):70-74.
[1] 刘博, 丛洪莲. 全成形西服横向编织技术的工艺模型与实现[J]. 纺织学报, 2020, 41(07): 53-58.
[2] 刘博, 丛洪莲. 四针床全成形休闲西服的工艺设计与成形原理[J]. 纺织学报, 2020, 41(04): 129-134.
[3] 王盼, 吴志明. 全成形毛衫横向编织方式及其成形工艺[J]. 纺织学报, 2019, 40(10): 73-78.
[4] 李珂, 吴志明. 基于收针工艺的全成形毛衫分割线设计原理[J]. 纺织学报, 2019, 40(06): 85-90.
[5] 路丽莎, 蒋高明, 罗璇. 全成形毛衫腋下拼角编织工艺及性能[J]. 纺织学报, 2019, 40(02): 69-75.
[6] 邱庄岩 花芬 吴志明. 四针床全成形编织工艺及其应用[J]. 纺织学报, 2018, 39(08): 63-70.
[7] 罗璇 彭佳佳 蒋高明 丛洪莲. 全成形毛衫样板设计及成形方法[J]. 纺织学报, 2018, 39(07): 105-110.
[8] 邱庄岩 吴志明 蒋高明. 全成形毛衫肩袖成形工艺[J]. 纺织学报, 2018, 39(03): 56-60.
[9] 彭佳佳 蒋高明 丛洪莲 王敏. 全成形毛衫的结构与编织原理[J]. 纺织学报, 2017, 38(11): 48-55.
[10] 王敏 丛洪莲 蒋高明 彭佳佳. 四针床电脑横机的全成形工艺[J]. 纺织学报, 2017, 38(04): 61-67.
[11] 罗璇 蒋高明 丛洪莲. 采用局部编织技术的毛衫特殊结构工艺与设计[J]. 纺织学报, 2016, 37(2): 55-60.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!