纺织学报 ›› 2021, Vol. 42 ›› Issue (11): 71-76.doi: 10.13475/j.fzxb.20210101206

• 纺织工程 • 上一篇    下一篇

人工韧带疲劳测试装置设计及其耐疲劳性能评价

卢俊1,2, 管晓宁1,2, 林婧1,2(), 劳继红1,2, 王富军1,2, 李彦1,2, 王璐1,2   

  1. 1.东华大学 纺织学院, 上海 201620
    2.东华大学 纺织面料技术教育部重点实验室, 上海 201620
  • 收稿日期:2021-01-08 修回日期:2021-05-31 出版日期:2021-11-15 发布日期:2021-11-29
  • 通讯作者: 林婧
  • 作者简介:卢俊(1996—),男,硕士生。主要研究方向为人工韧带的生物力学性能评价。
  • 基金资助:
    国家重点研发计划项目(2018YFC1106200);国家重点研发计划项目(2018YFC1106201);高等学校学科创新引智计划资助项目(BP0719035);中央高校基本科研业务费专项基金资助项目(20D110128/001)

Design of fatigue testing device and fatigue resistance evaluation of artificial ligaments

LU Jun1,2, GUAN Xiaoning1,2, LIN Jing1,2(), LAO Jihong1,2, WANG Fujun1,2, LI Yan1,2, WANG Lu1,2   

  1. 1. College of Textiles, Donghua University, Shanghai 201620, China
    2. Key Laboratory of Textile Science & Technology of Ministry of Education, Donghua University, Shanghai 201620, China
  • Received:2021-01-08 Revised:2021-05-31 Published:2021-11-15 Online:2021-11-29
  • Contact: LIN Jing

摘要:

针对人工韧带在膝关节腔内复杂力学环境作用下出现移植失效的问题,研制了一种人工韧带疲劳测试装置,由拉伸运动模块、扭转运动模块、屈曲运动模块和恒温液体回流系统组成。通过筛选人体正常行走过程中拉伸位移、扭转角度及屈曲角度等参数对人工韧带试样进行疲劳测试以及耐疲劳性能评价。结果表明:纤维和纱线之间的相互摩擦损伤是人工韧带试样的主要疲劳损伤模式,其拉伸断裂性能在疲劳测试后有一定的损失,归一化的拉伸模量随时间以指数函数形式下降;试样中各条大分子链在疲劳测试过程中会受到拉、压、扭、弯等一系列多个方向载荷的共同破坏作用,最终导致结晶度下降。

关键词: 人工韧带, 疲劳测试, 韧带移植物, 耐疲劳性能, 医用纺织品

Abstract:

Aiming at the graft failure of artificial ligaments under complex mechanical environment in the knee joint cavity, an artificial ligament fatigue testing device was built, composing of a tensile motion module, a torsion motion module, a flexion motion module and an insulation temperature liquid return system. Clinical physiological parameters such as tensile displacement, torsion angle and flexion angle of the human body during normal walking were selected for fatigue tests and evaluation of fatigue resistance of artificial ligament specimens. The results showed that the friction damage between fibers and yarns was the main fatigue damage mode of the specimens and the tensile property of the specimens suffered some loss after fatigue and the normalized tensile modulus decreased exponentially with time. The macromolecular chains of the specimens were subjected to a series of multi-directional loads such as tension, compression, torsion and flexion during the fatigue test, which ultimately led to a decrease in crystallinity.

Key words: artificial ligament, fatigue test, ligament graft, fatigue resistance, medical textiles

中图分类号: 

  • TS101.8

图1

拉伸运动模块 1—伺服电动机; 2—联轴器; 3—滚珠丝杆滑台; 4—力学传感器; 5—拉伸夹具。"

图2

扭转运动模块 1—步进电动机; 2—传动齿轮; 3—轴承座; 4—扭转夹具。"

图3

屈曲运动模块 1—压力支撑架; 2—导柱固定块; 3—弹簧导柱; 4—下压块。"

图4

人工韧带疲劳测试装置"

表1

疲劳测试方案"

状态 拉伸隔距/mm 扭转角度/(°) 屈曲角度/(°)
初始状态 34.64 15 60
加载状态 45.00 0 0
结束状态 34.64 15 60

图5

2种试样在不同疲劳时间点的表观形态"

图6

商用失效移植试样和试样 AL24-0的疲劳断口处形貌(×500)"

表2

细观尺度评价结果"

测试时间/h 断裂强力/N 刚度/(N·mm-1)
AL24-0 AL24-6 AL24-0 AL24-6
0 2 533.68±31.67 3 093.22±90.67 178.05±3.92 275.51±19.09
8 2 444.24±45.94 2 664.98±97.06 205.27±4.17 278.96±6.20
16 1 856.06±292.85 2 612.02±112.95 173.39±11.42 254.07±11.13
24 1 363.89±136.76 2 283.39±88.10 180.65±9.35 254.12±7.49

图7

2种试样的归一化拉伸模量-时间曲线"

表3

结晶度测试结果"

试样名称 结晶度/%
0 h 8 h 16 h 24 h
AL24-0 39.59 43.45 37.58 34.22
AL24-6 40.11 42.41 39.23 38.04
[1] PAULY H, KELLY D, POPAT K, et al. Mechanical properties of a hierarchical electrospun scaffold for ovine anterior cruciate ligament replacement[J]. Journal of Orthopaedic Research, 2019, 37(2):421-430.
doi: 10.1002/jor.v37.2
[2] JOSEPH A M, COLLINS C L, HENKE N M, et al. A multisport epidemiologic comparison of anterior cruciate ligament injuries in high school athletics[J]. Journal of Athletic Training, 2013, 48(6):810-817.
doi: 10.4085/1062-6050-48.6.03
[3] 李宇, 张豪, 肖世卓, 等. LARS人工韧带与自体腘绳肌腱一期重建前后交叉韧带的疗效比较[J]. 中国修复重建外科杂志, 2020, 34(8):1018-1024.
pmid: 32794672
LI Yu, ZHANG Hao, XIAO Shizhuo, et al. Effectiveness comparison of LARS artificial ligament and autogenous hamstring tendon in one-stage reconstruction of anterior and posterior cruciate ligaments[J]. Chinese Journal of Reparative and Reconstructive Surgery, 2020, 34(8):1018-1024.
doi: 10.7507/1002-1892.201908051 pmid: 32794672
[4] 陈伟, 邹刚, 刘毅. LARS韧带在前交叉韧带重建中的临床应用与关注热点[J]. 中国组织工程研究, 2020, 24(8):1287-1292.
CHEN Wei, ZOU Gang, LIU Yi. Clinical application and focus of LARS ligament in anterior cruciate ligament reconstruction[J]. Chinese Journal of Tissue Engineering Research, 2020, 24(8):1287-1292.
[5] 陈天午, 陈世益. 人工韧带用于前交叉韧带修复重建: 目前产品与经验[J]. 中国修复重建外科杂志, 2020, 34(1):1-9.
pmid: 31939226
CHEN Tianwu, CHEN Shiyi. Artificial ligaments applied in anterior cruciate ligament repair and reconstruction: current products and experience[J]. Chinese Journal of Reparative and Reconstructive Surgery, 2020, 34(1):1-9.
doi: 10.7507/1002-1892.201908084 pmid: 31939226
[6] 陈天午, 蒋佳, 陈世益. 人工韧带的临床应用现状及进展[J]. 宁夏医学杂志, 2016, 38(8):673-676.
CHEN Tianwu, JIANG Jia, CHEN Shiyi. Current status and progress of clinical application of artificial ligaments[J]. Ningxia Medical Journal, 2016, 38(8):673-676.
[7] GUIDOIN M F, MAROIS Y, BEJUI J, et al. Analysis of retrieved polymer fiber based replacements for the ACL[J]. Biomaterials, 2000, 21(23):2461-2474.
doi: 10.1016/S0142-9612(00)00114-9
[8] 刘明洁, 林婧, 关国平, 等. 典型纺织基人工韧带及其移出物结构与力学性能[J]. 纺织学报, 2020, 41(11):66-72.
LIU Mingjie, LIN Jing, GUAN Guoping, et al. Structures and mechanical properties of typical textile-based artificial ligaments and explants[J]. Journal of Textile Research, 2020, 41(11):66-72.
[9] 东华大学. 人工韧带多自由度在线疲劳模拟测试装置及其测试方法: 202011492121.4[P]. 2021-04-09.
Donghua University. Artificial ligament multi-degree-of-freedom online fatigue simulation testing device and method: 202011492121.4[P]. 2021-04-09.
[10] JUNG H J, VANGIPURAM G, FISHER M B, et al. The effects of multiple freeze-thaw cycles on the biomechanical properties of the human bone-patellar tendon-bone allograft[J]. Journal of Orthopaedic Research, 2011, 29(8):1193-1198.
doi: 10.1002/jor.v29.8
[11] WOO S L Y, HOLLIS J M, ADAMS D J, et al. Tensile properties of the human femur-anterior cruciate ligament-tibia complex: the effects of specimen age and orientation[J]. American Journal of Sports Medicine, 1991, 19(3):217-225.
doi: 10.1177/036354659101900303
[12] 卢俊, 陈泓傑, 汤旭, 等. 人工韧带拉伸扭转疲劳测试装置的设计和应用[J]. 东华大学学报(自然科学版), 2021.DOI: 10.19886/j.cnki.dhdz.2020.0354.
LU Jun, CHEN Hongjie, TANG Xu, et al. Design and application of artificial ligament tensile and torsion fatigue testing device[J]. Journal of Donghua University(Nature Science), 2021.DOI: 10.19886/j.cnki.dhdz.2020.0354.
[13] TAYLOR K A, CUTCLIFFE H C, QUEEN R M, et al. In vivo measurement of ACL length and relative strain during walking[J]. Journal of Biomechanics, 2013, 46(3):478-483.
doi: 10.1016/j.jbiomech.2012.10.031
[14] GAO B, ZHENG N Q. Alterations in three-dimensional joint kinematics of anterior cruciate ligament-deficient and -reconstructed knees during walking[J]. Clinical Biomechanics, 2010, 25(3):222-229.
doi: 10.1016/j.clinbiomech.2009.11.006
[15] DROUIN G, MASSON M, YAHIA L. In vitro fatigue testing of prosthetic ligaments: a new concept[J]. Bio-medical Materials and Engineering, 1991, 1(3):159-165.
doi: 10.3233/BME-1991-1304
[16] HONL M, CARRERO V, HILLE E, et al. Bone-patellar tendon-bone grafts for anterior cruciate ligament reconstruction:an in vitro comparison of mechanical behavior under failure tensile loading and cyclic submaximal tensile loading[J]. American Journal of Sports Medicine, 2002, 30(4):549-557.
doi: 10.1177/03635465020300041501
[17] 黄云帆. 全可降解人工韧带的成型及其力学和生物学性能研究[D]. 上海: 东华大学, 2020: 24-25.
HUANG Yunfan. Study on the mechanical and biological properties of fully degradable artificial ligaments[D]. Shanghai: Donghua University, 2020: 24-25.
[18] SHANAHAN C, TOFAIL S A M, TIERNAN P. Viscoelastic braided stent: finite element modelling and validation of crimping behaviour[J]. Materials & Design, 2017, 121:143-153.
[19] 薛雯. 复合编织血管支架物理力学性能研究[D]. 上海: 东华大学, 2019: 58.
XUE Wen. The research on physical and mechanical properties of composite braided stents[D]. Shanghai: Donghua University, 2019: 58.
[20] 宁方刚. 绳缆编织结构建模及其绕滑轮弯曲疲劳性能研究[D]. 上海: 东华大学, 2016: 121-125.
NING Fanggang. Researches on geometrical modeling of braided ropes and their bending fatigue properties when bent over sheaves[D]. Shanghai: Donghua University, 2016: 121-125.
[21] 于伟东. 纺织材料学[M]. 2版. 北京: 中国纺织出版社, 2018: 121-122.
YU Weidong. Textile material science[M]. 2nd ed. Beijing: China Textile & Apparel Press, 2018: 121-122.
[1] 卢俊, 王富军, 劳继红, 王璐, 林婧. 复合载荷下不同结构编织人工韧带的有限元分析[J]. 纺织学报, 2021, 42(08): 84-89.
[2] 苏梦茹, 邹婷, 陈颀超, 李超婧, 王富军, 王璐. 医用倒刺缝合线的研究进展[J]. 纺织学报, 2021, 42(05): 178-184.
[3] 蒋君莹, 高晶, 张剑. 吻合口加固修补组件背衬面料的选择与防漏性能评价[J]. 纺织学报, 2021, 42(04): 69-73.
[4] 殷聚辉, 郭静, 王艳, 曹政, 管福成, 刘树兴. 基于海藻酸钠/磷虾蛋白的支架材料制备及其性能[J]. 纺织学报, 2021, 42(02): 53-59.
[5] 杨刚, 李海迪, 乔燕莎, 李彦, 王璐, 何红兵. 聚乳酸-己内酯/纤维蛋白原纳米纤维基补片的制备与表征[J]. 纺织学报, 2021, 42(01): 40-45.
[6] 杨宇晨, 覃小红, 俞建勇. 静电纺纳米纤维功能性纱线的研究进展[J]. 纺织学报, 2021, 42(01): 1-9.
[7] 张倩, 毛吉富, 吕璐瑶, 徐仲棉, 王璐. 腱骨修复用缝线在锚钉孔眼处的耐磨性能及其影响因素[J]. 纺织学报, 2020, 41(12): 66-72.
[8] 刘明洁, 林婧, 关国平, BROCHU G, GUIDOIN R, 王璐. 典型纺织基人工韧带及其移出物结构与力学性能[J]. 纺织学报, 2020, 41(11): 66-72.
[9] 段方燕, 王闻宇, 金欣, 牛家嵘, 林童, 朱正涛. 淀粉纤维的成形及其载药控释研究进展[J]. 纺织学报, 2020, 41(10): 170-177.
[10] 乔燕莎, 王茜, 李彦, 桑佳雯, 王璐. 聚多巴胺涂层聚丙烯疝气补片的制备及其体外炎性反应[J]. 纺织学报, 2020, 41(09): 162-166.
[11] 严佳, 李刚. 医用纺织品的研究进展[J]. 纺织学报, 2020, 41(09): 191-200.
[12] 张星, 刘金鑫, 张海峰, 王玉晓, 靳向煜. 防护口罩用非织造滤料的制备技术与研究现状[J]. 纺织学报, 2020, 41(03): 168-174.
[13] 刘泽堃 李刚 李毓陵 李翼 王晓沁. 生物医用纺织人造血管的研究进展[J]. 纺织学报, 2017, 38(07): 155-163.
[14] 徐国平 丁新波 涂杨松 唐三湘 范树贤. 柔性涤纶吊装捆绑带的耐动态疲劳性能[J]. 纺织学报, 2015, 36(02): 66-70.
[15] 秦益民. 新型医用敷料:几种典型的高科技医用敷料(Ⅱ)[J]. 纺织学报, 2003, 24(06): 85-86.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 赵良臣;闻涛. 旋转组织设计的数学原理[J]. 纺织学报, 2003, 24(06): 33 -34 .
[2] 曹建达;顾小军;殷联甫. 用BP神经网络预测棉织物的手感[J]. 纺织学报, 2003, 24(06): 35 -36 .
[3] 【作者单位】:中国纺织工程学会秘书处【分类号】:+【DOI】:cnki:ISSN:0-.0.00-0-0【正文快照】:  香港桑麻基金会设立的“桑麻纺织科技奖” 0 0 年提名推荐工作;在纺织方面院士;专家和有关单位的大力支持下;收到了 个单位 (人 )推荐的 位候选人的. 2003年桑麻纺织科技奖获奖名单[J]. 纺织学报, 2003, 24(06): 107 .
[4] 【分类号】:Z【DOI】:cnki:ISSN:0-.0.00-0-0【正文快照】:  一;纺 纱模糊控制纺纱张力的研究周光茜等 ( - )………………原棉含杂与除杂效果评价方法的研究于永玲 ( - )……网络长丝纱免浆免捻功能的结构表征方法李栋高等 ( - )……………. 2003年纺织学报第二十四卷总目次[J]. 纺织学报, 2003, 24(06): 109 -620 .
[5] 张治国;尹红;陈志荣. 纤维前处理用精练助剂研究进展[J]. 纺织学报, 2004, 25(02): 105 -107 .
[6] 秦元春. 纺织工业发展方向初探[J]. 纺织学报, 2004, 25(02): 108 -110 .
[7] 高伟江;魏文斌. 纺织业发展的战略取向——从比较优势到竞争优势[J]. 纺织学报, 2004, 25(02): 111 -113 .
[8] 刘从九. 我国纺织品绿色国际竞争力[J]. 纺织学报, 2004, 25(02): 116 -118 .
[9] 林红;陈宇岳;任煜;仲志锋;王红卫. 经等离子体处理的蚕丝纤维结构与性能[J]. 纺织学报, 2004, 25(03): 9 -10 .
[10] 潘旭伟;顾新建;韩永生;程耀东. 面向协同的服装供应链快速反应机制研究[J]. 纺织学报, 2006, 27(1): 54 -57 .