纺织学报 ›› 2013, Vol. 34 ›› Issue (7): 15-21.

• 纤维材料 • 上一篇    下一篇

可生物降解聚碳酸亚丙酯/聚丙烯非织造布切片制备及其性能

田政1,2 潘莉莎1,2 陈龙敏3 陈喆3 徐鼐1,2 庞素娟1,2 林强4   

    1. 海南大学材料与化工学院
    2. 海南大学海南省精细化工工程技术研究中心
    3. 欣龙控股(集团)股份有限公司
    4. 海南师范大学化学与化工学院
  • 收稿日期:2012-07-16 修回日期:2012-10-08 出版日期:2013-07-15 发布日期:2013-07-15
  • 通讯作者: 潘莉莎 E-mail:happylisap@163.com
  • 基金资助:

    国家自然科学基金项目;海南省自然科学基金项目;国家非织造材料工程技术研究中心开放课题;海南大学青年基金项目

Preparation and performance of biodegradable slice of poly (propylene carbonate) / polypropylene for nonwoven fabrics

  • Received:2012-07-16 Revised:2012-10-08 Online:2013-07-15 Published:2013-07-15

摘要: 采用熔融共混法制备可生物降解聚碳酸亚丙酯(PPC)/聚丙烯(PP)熔喷无纺布切片,研究原料比例、共混温度、共混时间、共混转速对PPC/PP切片力学性能的影响,并研究PPC与PP比例对PPC/PP切片熔体流动速率、特性粘度,热学性能、微观形貌、降解性能的影响。结果表明:原料比例对力学性能的影响最大,在原料质量比PPC:PP为7:3、共混温度为175℃,共混时间为5min、转速为35r?min-1制备的PPC/PP切片,拉伸强度为13.02MPa,熔体流动速率为3494 g?(10min)-1。原料质量比PPC:PP为6:4时,熔体流动速率为1563g?(10min)-1,符合熔喷无纺布要求。PPC/PP切片热分解温度比PPC有较大幅度的提高,说明PP的加入提高了PPC/PP切片的热稳定性;扫描电镜图显示质量比PPC:PP为7:3的PPC/PP切片存在较少的凹陷或空洞,相容性较好,在磷酸缓冲液中降解30d后降解率达3.62%。

关键词: 聚碳酸亚丙酯, 聚丙烯, 熔融共混, 生物降解, 熔喷非织造布切片

Abstract: The biodegradable meltblown non-woven fabric slice of poly (propylene carbonate)(PPC) / polypropylene(PP) was prepared by melt blending. The effect of the proportion of raw materials, blending temperature, blending time, blending speed on the mechanical properties of slice of poly (propylene carbonate)(PPC) / polypropylene(PP) was investigated, and melt flow rate, intrinsic viscosity, thermal properties, micro-morphology, degradation performance of different proportions of PPC/PP fabric slice also be investigated.The results shown that the influence of the proportion of raw materials for mechanical properties was significant, the tensile strength was 13.02MPa and the MFR was 3494g?(10min)-1 when the raw material ratio of PPC: PP was 7:3, blending temperature was 175℃, blending time was 5min, blending speed was 35r?min-1.The MFR was 1563g?(10min)-1 when the raw material ratio of PPC/PP was 6:4, it was accorded with meltblown non-woven fabric slice requirement. The thermal decomposition temperature of slices was improved more than PPC. It explained to the thermal stability can be impoved for adding the PP. The results of SEM shown that the slice of the ratio of PPC/PP was 7:3 was more smooth, had less depressions and cavities, the compatibility was better, and the degradation rate was 3.6198% in phosphoric acid buffer after a month.

Key words: poly(propylene carbonate), polypropylene, melt blending, biodegradable, slice for melt blown nonwovens

中图分类号: 

  • TQ325
[1] 吴小娟 余妙晶 舒慧 郑怡筱 葛烨倩 . 过温保护层合纳米纤维隔膜的制备及其性能[J]. 纺织学报, 2018, 39(07): 21-26.
[2] 张博亚 李佳慧 张如全 李建强. 静电纺聚丙烯腈/硫酸铜纳米纤维膜的制备及其性能[J]. 纺织学报, 2018, 39(07): 15-20.
[3] 王迎 杨云 魏春艳 宋欢 季英超 孙玉雍 张欣. 沉积静电纺聚丙烯腈纳米纤维膜窗纱的制备及其性能[J]. 纺织学报, 2018, 39(04): 14-18.
[4] 龙啸云 张琰 葛明桥. 高强度抗老化土工布的制备与性能表征[J]. 纺织学报, 2018, 39(01): 66-70.
[5] 李树锋 刘高华 谢小军 韩永兴 张艳 程博闻. 同轴静电纺丝参数对聚丙烯腈中空碳纳米纤维形态与炭化收率的影响[J]. 纺织学报, 2017, 38(12): 1-6.
[6] 李晴碧 刘琴 顾迎春 彭旭 李静静 蒋洁 陈胜. 复合静电纺超细聚丙烯腈纳米纤维的制备[J]. 纺织学报, 2017, 38(11): 16-21.
[7] 苗琳莉 毛迎 李彦 孙红蕊 关国平 王富军 王璐. 三维纺织基疝修复假体的压缩性能定量研究[J]. 纺织学报, 2017, 38(11): 61-67.
[8] 贾琳 王西贤 张海霞 覃小红. 防紫外线聚丙烯腈复合纳米纤维的制备及其性能[J]. 纺织学报, 2017, 38(10): 1-6.
[9] 陈锋 姬忠礼 齐强强. 静电纺聚丙烯腈纳米纤维复合滤材的制备及其气液过滤性能[J]. 纺织学报, 2017, 38(09): 8-13.
[10] 魏发云 张伟 邹学书 何洋 张瑜. 等离子体诱导丙烯酸接枝改性聚丙烯熔喷非织造材料[J]. 纺织学报, 2017, 38(09): 109-114.
[11] 普丹丹 王瑞 董余兵 朱曜峰 傅雅琴. 表面改性处理对涤纶织物/聚氯乙烯复合材料界面性能的影响[J]. 纺织学报, 2017, 38(08): 102-107.
[12] 任元林 张悦 谷叶童 曾倩. 含磷阻燃聚丙烯腈纤维的制备及其性能[J]. 纺织学报, 2017, 38(08): 1-5.
[13] 申莹 邓炳耀 刘庆生 夏赛男 姚鹏飞. 不同填充密度的梯度结构复合滤材的制备及其性能[J]. 纺织学报, 2017, 38(07): 23-27.
[14] 李继丰 杜兆芳 董丹丹 颜家俊 许云辉 梅毓. 聚丙烯非织造布拒水整理对葡萄套袋微环境的影响[J]. 纺织学报, 2017, 38(07): 101-106.
[15] 贾琳 王西贤 张海霞 覃小红. 聚丙烯腈/二氧化钛纳米纤维的紫外线防护性能[J]. 纺织学报, 2017, 38(07): 18-22.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!