纺织学报 ›› 2016, Vol. 37 ›› Issue (12): 123-128.

• 机械与器材 • 上一篇    下一篇

喷气织机辅助喷嘴流场特性与耗气量分析

  

  • 收稿日期:2016-02-26 修回日期:2016-07-19 出版日期:2016-12-15 发布日期:2016-12-21

Analysis of weft insertion flow field and gas consumption of auxiliary nozzle in air-jet loom

  • Received:2016-02-26 Revised:2016-07-19 Online:2016-12-15 Published:2016-12-21

摘要:

为研究辅助喷嘴几何结构对喷嘴喷射效果及耗气量的影响,采用CFD软件Fluent对喷气织机辅助喷嘴流场进行数值模拟,获得了辅助喷嘴在不同供气压力、出口截面积、出口形状及喷射角下的纬纱飞行轴线气流速度分布。结果表明:随压力增大,射流速度的提升逐渐变弱,耗气量随压力呈正相关变化;喷嘴出口截面积影响射流速度和持续性,随截面积增加耗气量不断增大;截面积一定时,出口形状变化对筘槽内流场影响较小;纬纱飞行方向上气流速度及峰值位置随喷射角而变化,在实验范围内,喷射角越大耗气量越小,选择合适的辅助喷嘴和引纬工艺,是实现喷气织机高质低耗目标的关键。

关键词: 喷气织机, 辅助喷嘴, 流场, 耗气量

Abstract:

In order to study the influence of the auxiliary nozzle geometric structure on the nozzle jet effect and air consumption, the weft insertion flow field of the auxiliary nozzle was simulated with CFD software Fluent. The velocity distributions on the axis of weft flying of auxiliary nozzle under different conditions, such as the input air pressure, the outlet cross-sectional area, the outlet shape and the spray angle of auxiliary nozzle, are obtained. Results indicate that, with the increasing of input air pressure, the velocity of airflow is improved, while the increasing rate has been decreased. Gas consumption varies with the pressure positively. The velocity and sustainability of the air flow are determined by outlet cross-sectional area of auxiliary nozzle, and the air consumption is increasing with the growth of the cross-sectional area. For a given outlet cross-sectional area, various outlet shapes of auxiliary nozzle make little difference on the flow fields. Different nozzle spray angles correspond to different velocity and peak position on the direction of weft flying, and the air consumption is reduced with the increasing of spray angle in the experimental range. Therefore, appropriate auxiliary nozzle and weft insertion process play a critical role of achieving high air-jet loom quality and low consumption.

Key words: air-jet loom, auxiliary nozzle, flow field, gas consumption

[1] 胥光申 孔双祥 刘洋 罗时杰. 基于Fluent的喷气织机辅助喷嘴综合性能[J]. 纺织学报, 2018, 39(08): 124-129.
[2] 颜苏芊 王力平. 喷气织机中压缩空气的泄漏评估及其修复优化[J]. 纺织学报, 2018, 39(04): 130-136.
[3] 杨瑞华 刘超 薛元 高卫东. 转杯复合纺成纱器内流场模拟及纱线质量分析[J]. 纺织学报, 2018, 39(03): 26-30.
[4] 林惠婷 汪军. 纤维在输纤通道气流场中运动的模拟[J]. 纺织学报, 2018, 39(02): 55-61.
[5] 韩晨晨 程隆棣 高卫东 薛元 杨瑞华. 基于有限元模型的喷气涡流纺纤维运动轨迹模拟[J]. 纺织学报, 2018, 39(02): 32-37.
[6] 韩晨晨 程隆棣 高卫东 薛元 薛文良 杨瑞华 . 传统型与自捻型喷气涡流纺的对比[J]. 纺织学报, 2018, 39(01): 25-31.
[7] 陈洪立 李炯 金玉珍 武传宇 胡旭东. 空心锭结构参数对喷气涡流纺内流场的影响[J]. 纺织学报, 2017, 38(12): 135-140.
[8] 刘超 杨瑞华 薛元 高卫东. 凝聚槽类型对转杯内气流场影响的数值模拟[J]. 纺织学报, 2017, 38(05): 128-133.
[9] 韩要宾 张杰 高卫东 潘如如 张宁. 基于生产实践的喷气织机主喷嘴气压优选[J]. 纺织学报, 2017, 38(01): 126-131.
[10] 刘超 杨瑞华 王鸿博 高卫东. 转杯纺纱通道三维流场的数值模拟[J]. 纺织学报, 2016, 37(09): 145-150.
[11] 张亮 冯志华 张晓飞 刘帅. 喷气织机辅助喷嘴与异形筘结构参数对流场的影响[J]. 纺织学报, 2016, 37(09): 129-133.
[12] 张敏 王鸿博 高卫东 卢雨正 . 喷气织机车速对织物纬向物理力学性能的影响[J]. 纺织学报, 2016, 37(08): 41-46.
[13] 包西平 刘宜胜 吴震宇. 折入孔位置对纯气动毛边折入装置流场的影响[J]. 纺织学报, 2016, 37(08): 125-131.
[14] 金玉珍 胡小冬 林培锋 胡旭东. 喷气织机打纬机构及墙板的振动特性[J]. 纺织学报, 2016, 37(07): 131-136.
[15] 张亮 冯志华 刘帅 陈亮 张晓飞. 喷气织机辅助喷嘴喷孔结构优化设计[J]. 纺织学报, 2016, 37(06): 112-117.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!