纺织学报 ›› 2017, Vol. 38 ›› Issue (01): 146-151.doi: 10.13475/j.fzxb.20151005306

• 管理与信息化 • 上一篇    下一篇

应用弹簧−质点模型的双贾卡提花织物形变仿真

  

  • 收稿日期:2015-10-26 修回日期:2016-06-07 出版日期:2017-01-15 发布日期:2017-01-16

Deformation simulation of double jacquard fabric with mass-spring model

  • Received:2015-10-26 Revised:2016-06-07 Online:2017-01-15 Published:2017-01-16

摘要:

为改善双贾卡提花经编织物的结构形变仿真,在分析双贾卡织物线圈结构形变影响因素的基础上,建立成圈型、压纱型和衬纬型线圈几何结构模型;在传统的弹簧质点模型基础上进行改进,取线圈根部作为质点,线圈之间的延展线为弹簧,根据双贾卡提花特点,针对压纱贾卡与衬纬贾卡设定虚拟质点,建立双套弹簧系统;根据牛顿第二定律和显式中点法,计算质点在二维平面的运动形态,从而确定线圈的偏移方向和偏移量;利用建立的弹簧质点模型与力学分析模型在VC++语言下实现了双贾卡提花经编织物的二维静态仿真,通过实际样例与对应仿真效果对比,验证仿真方法。

关键词: 经编, 提花织物, 压纱贾卡, 衬纬贾卡, 弹簧质点模型, 仿真

Abstract:

A modified mass-spring model was proposed in order to improve the structural deformation simulation of double jacquard warp-knitted fabrics. Geometrical loops models, including stitch, fall-plate and inlay, were built first based on analyzing influencing factors and features of deformation. By modifying the traditional mass-spring model, root of the loop model was referred as a mass particle, and underlaps between stitches were regarded as different kinds of springs. According to characters of double jacquard fabrics, two sets of spring systems were built with an additional set of hypothetical mass particles, correspondingly for fall-plate and inlay jacquard structures. Particles’ resultant force, motion state and deformation were calculated with Newton Second law and explicit Euler method. With the present mass-spring models and mechanical analysis method, two-dimensional deformation simulation was realized via VC++, and then was proven by comparing real sample and simulation effect.

Key words: warp-knitting, jacquard fabric, fall-plate jacquard, inlay jacquard, mass-spring system, simulation

[1] 苏柳元 孟婥 张玉井 赵义满. 经编机梳栉横移系统误差建模与仿真[J]. 纺织学报, 2018, 39(08): 130-137.
[2] 赵福英 倪俊芳. 花型样条曲线加工代码生成算法[J]. 纺织学报, 2018, 39(07): 153-158.
[3] 张艳 贺克杰 李欣欣 蒋高明. 多梳拉舍尔花边的多层次设计[J]. 纺织学报, 2018, 39(07): 44-49.
[4] 孙影慧 杜劲松. 服装单件流水线的Flexsim仿真[J]. 纺织学报, 2018, 39(06): 155-161.
[5] 张妙维 修毅. 三维服装仿真中人体左右剖面的构造[J]. 纺织学报, 2018, 39(04): 158-162.
[6] 徐丽玉 董智佳 丛洪莲 刘海桑. 经编全成形室内健身服的尺寸预测[J]. 纺织学报, 2018, 39(04): 100-105.
[7] 张灵婕 缪旭红 万爱兰 蒋高明 陈方芳. 上浆前处理剂对经编用棉纱性能的影响[J]. 纺织学报, 2018, 39(04): 82-86.
[8] 吴杰伟 孙志宏 郁强 陈燕婷 邱夷平 周其洪 陈晓川. 等覆盖率变径编织方法[J]. 纺织学报, 2018, 39(04): 54-62.
[9] 常玉萍 马丕波. 负泊松比经编间隔织物的准静态拉伸性能[J]. 纺织学报, 2018, 39(04): 47-53.
[10] 董智佳 蒋高明 丛洪莲 张爱军. 经编全成型运动装款式建模与工艺实现[J]. 纺织学报, 2018, 39(02): 38-42.
[11] 冯勇 蒋高明 吴志明 徐存东. 基于物联网的经编制造执行系统关键技术[J]. 纺织学报, 2018, 39(02): 144-149.
[12] 郑静 夏风林 刘浪. 基于Simulink的经编机电子横移系统仿真[J]. 纺织学报, 2018, 39(02): 150-156.
[13] 胡瑜 刘行 缪旭红. 经编纱线动态张力评价指标[J]. 纺织学报, 2018, 39(02): 68-72.
[14] 高哲 蒋高明. 多轴向经编曲面复合材料汽车门低速碰撞数值模拟[J]. 纺织学报, 2018, 39(02): 43-48.
[15] 张爱军 蒋高明 李欣欣 丛洪莲. 基于分形噪声和几何着色器的经编毛绒织物仿真[J]. 纺织学报, 2018, 39(02): 171-176.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!