纺织学报 ›› 2019, Vol. 40 ›› Issue (06): 32-37.doi: 10.13475/j.fzxb.20180703206

• 纺织工程 • 上一篇    下一篇

贾卡提花经编间隔织物的撕裂性能

孙婉, 缪旭红(), 王晓雷   

  1. 江南大学 教育部针织技术工程研究中心, 江苏 无锡 214122
  • 收稿日期:2018-07-13 修回日期:2019-02-26 出版日期:2019-06-15 发布日期:2019-06-25
  • 通讯作者: 缪旭红
  • 作者简介:孙婉(1993—),女,硕士生。主要研究方向为纺织材料与纺织品设计。
  • 基金资助:
    中央高校基本科研业务费专项资金项目(JUSRP51727A);国家轻工技术与工程一流学科自主课题资助项目(2018-28)

Tearing properties of Jacquard warp knitted spacer fabric

SUN Wan, MIAO Xuhong(), WANG Xiaolei   

  1. Engineering Research Center for Knitting Technology, Ministry of Education, Jiangnan University, Wuxi, Jiangsu 214122, China
  • Received:2018-07-13 Revised:2019-02-26 Online:2019-06-15 Published:2019-06-25
  • Contact: MIAO Xuhong

摘要:

为实现合理配置贾卡组织结构提高鞋面力学性能,采用鞋面材料常用的8种贾卡提花组织,研究了贾卡提花经编间隔织物及部分单层织物的纵横向的撕裂性能,总结了贾卡提花经编间隔织物的横纵向撕裂机制、织物破坏情况、撕裂曲线特征以及贾卡组织对其纵横向撕裂强力的影响。结果表明:横向撕裂时织物先沿着横向破坏,然后转为沿纵向破坏;纵向撕裂时,织物沿纵向至完全破坏;横向撕裂的曲线锯齿状峰波动较大,而纵向撕裂的曲线较为整齐;撕裂曲线及撕裂特征主要由贾卡面决定,横向撕裂长度主要由撕裂长度较小的一面决定。贾卡面全为薄组织的间隔织物横纵向撕裂强力均最小,在鞋面材料撕裂强力不足时应避免使用。

关键词: 经编, 间隔织物, 贾卡提花, 撕裂性能, 鞋面材料

Abstract:

In order to improve the mechanical properties of the vamp by rationally configuring the Jacquard structure, eight kinds of Jacquard structure commonly used in vamp materials were adopted to study the tearing properties weftwise and warpwise of the Jacquard warp knitted spacer fabric and some single-layer fabrics. The weftwise and warpwise tearing mechanism, destruction of fabric and the tearing curve characteristics of the Jacquard warp knitted spacer fabric were summarized. The influence of Jacquard structure on the tearing strength of weftwise and warpwise was also researched. When the fabric is transversely torn, the fabric is first broken along the weft direction and then along the warp direction. When the fabric is longitudinally torn, the fabric is destroyed completely in the warp direction. The curve of the weftwise tearing fluctuates greatly, while the warpwise tearing curve is relatively regular. The tearing curve and characteristics are mainly determined by the Jacquard side, and the length of the tearing weftwise is mainly determined by the side with the smaller tear length. The tear strength of Jacquard spacer fabric with a thin structure is minimum either in weft direction or warp direction, which should not be used when the tearing strength of the upper material is insufficient.

Key words: warp knitting, spacer fabric, Jacquard, tearing property, vamp material

中图分类号: 

  • TS186.1

表1

样品基本工艺表"

梳栉
编号
垫纱组织 原料规格 穿纱 送经量/
(mm·腊克-1)
GB1 1-0-0-0/2-
3-3-3//
166.67 dtex(48 f)
涤纶FDY
满穿 2 360
GB2 1-0-0-0/0-
1-1-1//
166.67 dtex(48 f)
涤纶FDY
满穿 1 480
GB3 1-0-2-1/2-
3-1-2//
33.33 d tex
涤纶单丝
满穿 7 600
JB4 1-1-1-0/1-
1-1-2//
166.67 dtex(48 f)
涤纶FDY
满穿 -
GB5 1-1-1-0/1-
1-0-1//
166.67 dtex(48 f)
涤纶FDY
满穿 1 480

表2

样品规格"

试样
编号
成品横密/
(纵行·cm-1)
成品纵密/
(横列·cm-1)
贾卡梳送
经量/
(mm·腊克-1)
面密度/
(g·m-2)
1# 25 36.0 2 220 479.9
2# 25 41.0 2 360 519.9
3# 25 40.0 2 290 500.1
4# 25 38.0 2 240 482.8
5# 24 38.0 2 170 477.8
6# 24 39.5 2 270 489.7
7# 25 38.0 2 250 496.9
8# 25 39.0 2 270 506.6

图1

贾卡意匠图"

图2

试样实物图"

图3

间隔织物和单层织物撕裂曲线"

图4

试样横纵向撕裂破坏情况"

图5

贾卡组织线圈结构图"

表3

间隔织物与其上下面纵横向撕裂强力及撕裂长度"

试样
编号
横向撕裂
强力/N
横向撕裂
长度/mm
纵向撕裂
强力/N
纵向撕裂
长度/mm
1# 89.88 52.25 55.59 179.18
1#-1 50.93 54.07 32.90 164.50
1#-2 34.43 157.07 14.82 190.24
2# 137.38 94.02 65.01 158.04
2#-2 35.83 289.33 23.27 146.92
3# 110.81 71.97 60.04 188.42
4# 91.89 62.96 68.56 193.81
5# 95.14 72.65 75.21 122.66
5#-2 32.89 169.43 31.05 160.40
6# 90.11 70.52 61.41 77.73
7# 92.97 63.91 61.00 168.50
8# 96.67 72.29 62.39 159.38
8#-2 49.57 148.03 28.10 170.17
[1] 魏赛男, 姚继明, 彭志远. 鞋材用经编间隔织物的服用性能[J]. 上海纺织科技, 2012,40(11):16-19.
WEI Sainan, YAO Jiming, PENG Zhiyuan. Wearing propertiesof warp-knitted spacer fabric for shoe-making[J]. Shanghai Textile Science Technology, 2012,40(11):16-19.
[2] 钟君, 丛洪莲, 张燕婷, 等. 经编单层立体提花鞋面织物的花型设计与生产工艺[J]. 纺织学报, 2017,38(2):111-116.
ZHONG Jun, CONG Honglian, ZHANG Yanting, et al. Pattern design and production process of warp-knitted single-layer stereo jacquard shoe-upper[J]. Journal of Textile Research, 2017,38(2):111-116.
[3] 简晚霞, 张琦, 万爱兰, 等. 针织成形鞋材生产技术现状[J]. 纺织导报, 2017(10):70-72.
JIAN Wanxia, ZHANG Qi, WAN Ailan, et al. Development of the manufacturing technology for fully-fashioned knitted vamp[J]. China Textile Leader, 2017(10):70-72.
[4] 李金茗. 织物撕裂和纰裂性能测试相关性研究[D]. 西安:西安工程大学, 2012: 6-10.
LI Jinming. Research on relation between fabric tearing and cracking performance[D].Xi'an: Xi'an Polytechnic University, 2012: 6-10.
[5] 寿钱英. 纬编针织物抗撕裂、顶破和穿刺性能研究[D]. 上海:东华大学, 2012: 18-20.
SHOU Qianying. Study of weft-knitting fabric's tear resistance, bursting properties and quasi-static stab resistance[D]. Shanghai: Donghua University, 2012: 18-20.
[6] MENG J, LI P, MA G, et al. Tearing behaviors of flexible fiber-reinforced composites for the stratospheric airship envelope[J]. Applied Composite Materials, 2017,24(3):735-749.
doi: 10.1007/s10443-016-9539-7
[7] 姚渊锋. 经编间隔织物与海绵作为汽车用坐垫性能方面的研究[D]. 上海:东华大学, 2005: 30-33.
YAO Yuanfeng. Study on the properities of warp knitted spacer fabric and used as auto cushion[D]. Shanghai:Donghua University, 2005: 30-33.
[8] 杨大伟, 缪旭红, 赵帅权. 经编成形鞋面的结构与设计[J].针织工业, 2015(7):60-63.
YANG Dawei, MIAO Xuhong, ZHAO Shuaiquan. Structure and design of warp knitted fully-fashioned vamp[J]. Knitting Industries, 2015(7):60-63.
[9] 李筱一, 缪旭红, 杨大伟, 等. 经编间隔双色成形鞋面的工艺设计[J]. 针织工业, 2016(2):21-23.
LI Xiaoyi, MIAO Xuhong, YANG Dawei, et al. Technology design of double colored fully-fashioned vamp by warp knitted spacer fabric[J]. Knitting Industries, 2016(2):21-23.
[10] 杨大伟, 缪旭红, 孙婉, 等. 经编贾卡提花间隔织物的顶破性能[J]. 纺织学报, 2016,37(9):48-52.
YANG Dawei, MIAO Xuhong, SUN Wan, ect. Bursting properties of warp knitted jacquard spacer fabrics[J]. Journal of Textile Research, 2016,37(9):48-52.
[1] 孙帅, 缪旭红, 张琦, 王瑾. 高速经编机上纱线张力的波动规律[J]. 纺织学报, 2020, 41(03): 51-55.
[2] 汪健东, 夏风林, 李亚林, 赵钰宁. 经编机梳栉电子横移伺服的最优滑模控制[J]. 纺织学报, 2020, 41(02): 143-148.
[3] 张晓会, 杨曈, 马丕波. 基于3D 打印的竹节结构中空单丝制备及其压缩性能[J]. 纺织学报, 2019, 40(12): 32-38.
[4] 张琦, 罗成, 曲超群, 魏莉, 程茜, 夏风林. 现代经编电子提花断点续织关键控制技术[J]. 纺织学报, 2019, 40(10): 164-170.
[5] 徐云龙 夏风林. 双针床经编机间隔距离对纱线需求量的影响分析[J]. 纺织学报, 2019, 40(08): 151-156.
[6] 贺克杰, 蒋高明. 拉舍尔蕾丝边部的结构设计与分离工艺[J]. 纺织学报, 2019, 40(07): 51-57.
[7] 陈美玉, 孙润军, 张长琦, 刘先锋. 经编间隔织物的缓压性能[J]. 纺织学报, 2019, 40(07): 58-63.
[8] 张琦, 魏莉, 罗成, 夏风林, 蒋高明. 基于双总线架构的经编机双贾卡提花控制系统[J]. 纺织学报, 2019, 40(07): 145-150.
[9] 徐云龙, 夏风林. 双针床经编机梳栉摆动对瞬时需纱量和纱线张力的影响[J]. 纺织学报, 2019, 40(06): 106-110.
[10] 马丕波, 孙亚鑫. 针织结构材料在安全防护领域的应用研究进展[J]. 纺织学报, 2019, 40(06): 176-181.
[11] 杨昆, 李美奇, 张诚, 郭溪. 经编光纤传感织物结构变化对光纤弯曲损耗的影响[J]. 纺织学报, 2019, 40(06): 27-31.
[12] 杨婉秋 刘晓艳 于伟东. 多层防刺材料中间隔织物的缓冲作用[J]. 纺织学报, 2019, 40(04): 51-54.
[13] 张琦 魏莉 夏风林. 三层双色立体提花经编鞋材的开发[J]. 纺织学报, 2019, 40(03): 59-64.
[14] 孙婉 缪旭红 王晓雷 蒋高明. 基于经编间隔织物的压力电容传感器特性[J]. 纺织学报, 2019, 40(02): 94-99.
[15] 刘海桑 董智佳 张琦 夏风林 丛洪莲. 经编全成型运动套装的尺寸预测与建模[J]. 纺织学报, 2019, 40(02): 76-81.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!